Learn seven skills of easy parking.

In the city where parking spaces are hard to find, I believe many drivers have been discouraged by the imperfect roadside parking technology, or regretted their failure when reversing into the warehouse! In fact, as long as you master the trick of reversing, I believe there is no cure for your problem of not parking properly. Look forward, look back, aim at the angle first. When parking on the roadside, remember that no matter how long the parking space is marked, the rear of the car must enter first to get in place smoothly. Some drivers are too lazy to push the gear to reverse. They saw the long distance between the front and back of the parking space, so they hit the steering wheel to cut in line. This kind of misjudgment ignores the width of the car body, because the right front wheel of the car is about to hit the curb, and it is bound to be corrected to the left. In this way, instead of leaving your ass in the slow lane, you have to go back and forth several times to stop straight. Here are some suggestions:

1, roadside parking must first pass through the parking space and be parallel to the vehicles in the front parking space.

2. According to the size of the parking space to be entered, determine the parallel distance from the preceding vehicle.

3. After the visual inspection is completed, always turn the steering wheel to the right for more than one and a half turns, and then start reversing.

4. When the right headlight of the car sweeps near the left taillight of the front car, start straightening and turn the steering wheel to the left.

5. When the car body has completely stopped between the front and rear cars, pay attention to whether it protrudes excessively and must be corrected repeatedly.

6. If the parking space is just enough to put the car, the angle of reversing must be larger.

7. In order to prevent the tail end of the left rear bumper of the front vehicle from abutting against the right door of the vehicle, leave more space when side by side.

How to park in a narrow and tense roadside parking space

The most comprehensive ramp parking skills

Speaking of parking, you may think it's nothing. Parking is easy. Actually, parking has a lot of knowledge. Generally speaking, parking should consider not only your own convenience, but also the convenience of others; Not only the convenience of parking, but also the convenience of getting off; When parking, we should not only consider the environment and car condition, but also consider the situation and consequences if an accident occurs. Therefore, parking is also an important skill for both old drivers and novices. Let's talk about the knowledge of ramp parking first.

Parking on the ramp mainly depends on the braking force of the parking brake (hand brake), so the main consideration is that if the parking brake doesn't work, you should try to avoid the car sliding down the ramp or into the middle of the approach. There are many examples that the parking brake handle is not tightened, or the parking brake fails, which eventually causes the car to slide down the ramp, causing injuries and crashes. So how should parking on the ramp be operated?

In addition to tightening the parking brake handle, corresponding measures should be taken according to the specific situation.

Situation 1: Parking on the roadside on the uphill road. After parking, set the shift lever to 1 (manual shift). If there is a kerb on the roadside, make the front wheel form a certain angle to the left, and make the rear of the right front wheel close to or close to the kerb to prevent the car from sliding backwards along the slope. If there is no kerb on the roadside, turn the front wheel to the right at a relatively large angle to prevent the car from sliding backwards along the slope and driving to the middle of the road.

Situation 2: stop on the downhill road. Turn the gear lever to reverse gear (manual gear) after parking. If there is a kerb on the roadside, turn the front wheel to the right for a certain angle, so that the front of the right front wheel is close to or close to the kerb to prevent the car from sliding along the slope. If there is no kerb on the roadside, turn the front wheel to the right at a relatively large angle to prevent the car from sliding along the slope and driving to the middle of the road.

Situation 3: Parking in the uphill area of the parking lot. After parking, set the shift lever to 1 (manual shift). At this time, the front wheel should be tilted to the left or right to avoid the possibility that the car may always slide backwards along the slope. If the ramp is steep, then some auxiliary measures should be taken, such as putting stones next to the rear wheels.

Situation 4: Parking in the downhill area of the parking lot. Turn the gear lever to reverse gear (manual gear) after parking. At this time, the front wheels should also be tilted to the left or right to avoid that the car may always run smoothly along the slope. If the ramp is steep, put some stones under the front wheel just in case.