What should I do if the water pipe at home is cracked? Let's talk.

First, the cause of water leakage in the kitchen sewer To solve the problem of water leakage maintenance, we must first find the cause of water leakage. Let's take a look at some ways to deal with water leakage listed below. The water pipe must be checked first to see which part of the water pipe leaks. Water pipe leakage usually occurs in sewer pipes, water pipe joints and other places. The treatment methods of water leakage in different parts are: 1, water leakage at the faucet outlet: a, sand holes or cracks in the faucet body are very rare, so the faucet can only be returned. B, mostly the valve core of the faucet is broken. Just remove the faucet and replace it with the valve core of the same model. 2. Water pipe joint leaks: unscrew the water pipe, and wrap the joint with "water stop" or "white hemp" or extremely thin plastic bag for three or four times and tighten it. If you don't repair it repeatedly, look at the water pipe to see if it is cracked or the faucet is too tight. If the coupling is broken, replace the coupling. Second, the solution to the leakage of the kitchen sewer pipe 1, the water pipe joint at home leaks, first disconnect the water source and unscrew the interface. If the thread leaks, it can be removed. If the leakage is not big, you can buy a set of agricultural machinery glue to make up. If it's a metal joint, either tighten it, or if it doesn't work, remove it directly, add some raw material tape and tighten it again. It is more difficult if the adhesive joint or welding joint is aging or leaking. Better get a new one. If your tools and skills are limited, you can find professional maintenance personnel to repair them. 2. If the sewer leaks, you can buy a PVC sewer and connect it yourself. First cut the broken pipe, put the joint into one end of the pipe, so that the cutting position at the other end is just flush with the other hole of the joint, so that it can be straightened. Then, send it directly to this end so that the two ends have a certain crossing distance (length), then remove it and smear it with PVC glue. You can also buy waterproof glue to repair sewer pipes. First, entangle the leaking pipes, and then clean them with mortar waterproofing agent and cement.