Who said anything about the top floor inspection? What matters and points should be paid attention to in house inspection?

I. What matters should be paid attention to in house inspection 1. Whether the floor is flat or not (Precautions for house inspection) If you want to check whether the floor is flat or not, you only need to use a long ruler (or a special ruler with a spirit level) to check whether it is flat or not and stick it on the wall floor, and at the same time observe whether there are scratches and cracks, and whether there are explosion points on the wall (explosion point: quicklime will be mixed unevenly when it is cooked, which will form explosion points on the wall. 2. Whether there are cracks in the wall (precautions for house acceptance and house inspection) While checking whether the wall is flat, it is also necessary to check whether there are cracks in the wall (four common cracks: strength cracks, settlement cracks, temperature cracks and deformation cracks) and whether there are barbed wire and steel bars leaking out. If the house inspection finds the above wall problems, the developer can help with the maintenance, after all, it is necessary to sign. 3. Whether there is any defect in the indoor stairs (matters needing attention in house inspection) mainly depends on the flatness of the stairs and whether there is any defect. 4. Whether the installation track of doors and windows is smooth (precautions for house inspection) In terms of door and window inspection, the most important thing is to check whether the track of doors and windows is smooth. In particular, parents of casement windows must pay attention to whether they can be closed tightly. Otherwise, there will be wind entering the room, especially in the cold north, and you will be very miserable in winter. If these problems are found in the second house inspection, inform the developers directly and they will fix them soon. If you have signed it, please ask the developer to deal with these problems. Then their efficiency is turtle speed. The second aspect is to check whether the doors and windows of the new house are damaged. Whether the window frame is deformed. If there is any abnormality, please find the developer to solve it. This is a matter that needs your attention very much, especially the doors and windows of each room should be carefully checked to avoid unnecessary economic losses. 5. Whether the entrance door is knocked and painted (precautions for house acceptance) 6. Balcony equipment is not damaged (precautions for house acceptance). When accepting the balcony, it is mainly to see whether the floor of the balcony is flat, followed by whether the window equipment of the balcony is in good condition. 7. The building height should not be less than 2.8m (precautions for house acceptance and house inspection). Because the building height of a building is generally 2.8 meters, the actual height should not be less than 2.6 meters, the actual height of a 3-meter-high building should not be less than 2.75 meters, but the height of a residential building should not be less than 2.8 meters. 8. Whether the water supply is complete (matters needing attention in house acceptance and house inspection) The matters needing attention to whom to check are mainly to see whether the faucets of the water pipes in the room have water supply and whether they are complete (including the faucets of the pipeline wells in the corridor). 9. Whether the drainage is normal (matters needing attention in house acceptance and house inspection) 10. Whether the electricity quantity is consistent with the purchased quantity (points for attention in house inspection) The first thing to check in electrical aspect is whether the water and electricity in the electric card and water card are consistent with the purchased quantity; 1 1. Whether the reserved holes are reasonable (precautions for house acceptance) First, ask about the air-conditioning seats and holes in the living room, south and north bedrooms. Especially when checking the air conditioning holes, be sure to look at the inside high and the outside low. If it is high outside and low inside, rain will flood in when it rains, which is a troublesome thing, especially when air conditioning holes are opened in the north, and irrigation is very serious. If this problem is found, we insist that kfs plug the original hole and re-punch it. 12. Strong current and weak current (matters needing attention in house inspection) 13. How to check the indoor flatness (points for attention in house inspection): (1) Tie a heavy object on the roof with a string, stick it on the wall and put it down to the foot of the wall, and check its inclination from all sides. (2) Visually, it is roughly flat. (3) Check the flatness of the wall. Whether the walls and ceiling floors are particularly inclined, bent and corrugated. 14. Check the verticality of doors and windows (precautions for house acceptance and house inspection) (1) whether the bolts and locks of doors and windows are too long and too tight. (2) Are there too few door bolts? Whether the door gap is too large (especially on the side of the door lock). (3) whether the four sides of the door are close to the door frame, and whether there is any special sound when opening and closing the door. (4) Is there any water stain under the windowsill? If there is, the window may be leaking. (5) Whether there is a gap between the window and the concrete interface. (6) Is the switch window too tight? Can you turn it off? (7) Whether the window glass is in good condition. 15. Public * * * supporting facilities (precautions for house acceptance)