Replace the windows with new ones.

Change windows again. In life, I believe many friends have had the experience of changing windows. For the old house to be renovated, the first thing to do is to change the windows. The quality of windows is related to the whole decoration style. Below I sorted out the window that was replaced again.

Replace the new window 1 1 and remove the sash.

Prepare tools such as screwdriver first, and then use these tools to remove the window sash. Pay attention to safety when disassembling. Someone should hold the window on the other side to prevent it from falling. Moreover, the sash should be gently placed on the ground after disassembly, and it should not be pushed down from the sky, otherwise it will hurt the pedestrians underground.

2. Remove the window frame.

After the window frame is removed, the whole window frame can be removed. When disassembling, first cut the sealant in the window frame with a blade. If it is fixed with bolts, just remove the bolts directly with a screwdriver. If the bolt on it is rusty, you can break it with an impact drill, so that the window frame can be easily removed.

3. Repair windows and holes

When removing the window, the window opening may be damaged. If it is not repaired, installing new windows later will have an impact. Therefore, after the window is removed, it is necessary to repair the hole to see if it is uneven. If there is such a situation, we must deal with it in time.

4. Manufacturer's measurement.

After all the old windows are removed, you can contact the manufacturer to measure the size at home. They will have a special installation master to check the situation, design drawings according to the installation situation and make a quotation. After measuring the size, the manufacturer needs to customize the appropriate window, which usually takes 20-30 days to make, and can be reinstalled after making.

5. Reinstall the window

Finally, you can start installing windows. Install the window frame first, and fix it on the mended hole. Pay attention to the firm installation and seal around the window frame. Then install the window sash. After installation, try to open and close the window to see if it can be closed tightly.

To replace a new window 2, we should first consider what kind of window to choose.

At present, there are low-grade plastic steel windows, aluminum alloy sliding windows, middle and high-grade broken bridge aluminum casement windows, aluminum-wood composite windows and high-grade aluminum-clad wood windows on the market. Which one to choose depends on your own financial ability and personal preference. Low-grade plastic steel windows and aluminum alloy sliding windows are rarely used in new residential areas, and high-grade prices are too expensive, difficult to manage and impractical. It is best to choose the broken bridge aluminum casement window, which is both beautiful and easy to clean.

Shop around and compare the quality and workmanship.

No matter what you buy, you'd better read more and know its product composition and some basic knowledge before you can make a counter-offer. Besides, I'll teach you a good method. Ask the price in the store first, then ask the manufacturer the price in this city, and go to the manufacturer to see the goods. Don't believe that the goods said by the store are sent from other places, you should go and see for yourself and understand for yourself. In fact, many shops sell local goods.

What style do you want to decorate your home? Then confirm which window color to match, and then confirm the color, style and price. Now the colors of the windows are also varied. Just choose what you like, and then it is suitable for the overall decoration. You'd better decide the color yourself. If you have style, you can listen to the suggestions of the store, and of course you have to like it yourself.

Don't pay the money first, test the plan first, and then pay the deposit after the plan is determined. Some people buy things simply, and merchants ask them to pay a deposit first. In fact, the correct way is to measure the size of the scheme, where the fan is turned on and where the fixed frame is left, and design it in advance. When the scheme comes out, the buyer will pay the deposit after confirming it, so as not to suffer losses.

The removal of old windows, whether it is done by the shop owner or by himself, can be negotiated with the shop owner. Generally, door and window shops and companies are not responsible for the demolition of old windows. But because the industries are connected, it is very convenient for the owners to find someone to tear down the old windows. Generally, goods arrive at work without extra charge. However, the demolished windows were also taken away by the residents themselves, and the owners have no right to interfere. If the old window is useful, you can also have it removed by yourself.

Sign a contract, and if the actually installed window is inconsistent with the sample window you see, you can ask for compensation or redo it. Remember to sign the contract, the terms of the contract must be read clearly, and it is safer to write everything that may be encountered into the contract. For example, the construction period, quality, follow-up service, etc. should be indicated in the contract. If you have problems in the future, you can also directly find a company or store to defend your rights.

After the contract is signed, it will be installed at home according to the agreed time limit.

It is better to have someone present during the installation. If carefully installed, the overall effect will be better. If the workmanship is rash and the quality and material are inconsistent with the model window, you can refuse to install it and ask for redone. When someone is watching the installation, the installer will be more careful and careful. I hope that the owners who need to change windows at home can read this article and help you.

Replace the windows with new ones. 1. How often should the window sealing strip be replaced?

The replacement time needs to be determined according to the situation. First, check whether the sealing strip is cracked or damaged. If the sealing strip is broken, it can be repaired with adhesive. In particular, it is easy to repair large cracked strips by using special glue for sealing strips. Of course, if the sealing strip is seriously damaged or aged, it is best to replace it with a new one.

Second, how to use the window sealing strip?

65438+ As the rubber strip is elastic, it may shrink after rolling. The correct method is: when installing the adhesive tape at the interface between the two ends, retract the two ends of the adhesive tape slightly to the middle, leaving a shrinkage margin of 2-3 cm, and then cut and embed the notch.

2. Glass layering: insert the rubber strip into the profile groove by hand according to the correct surface, and then press the exposed surface of the rubber strip hard to press the rubber strip into the gap between the glass and the profile. Rubber strip at both ends is shrunk to the middle, leaving a length of 1-2 cm, and then cut and press into the notch.

How to replace the sealing strip of plastic steel window

1, glass gasket and adhesive tape.

After welding and corner cleaning, push the rubber strip into the notch of the profile with a small amount of force according to the accurate surface direction with a special roller, and press the head of the rubber strip down into the notch of the profile to stop. Because rubber strip is an elastomer, it will shrink when rolled. The accurate method is: when the two ends of the adhesive tape device are connected, the two ends of the adhesive tape will shrink a little toward the base, leaving a shortening margin of 2-3 cm, and then cutting and embedding into the notch.

2, glass layering.

Insert the tip of the tape into the groove of the profile by hand, press the outer surface of the tape hard, and press the tape into the gap between the glass and the profile. Rubber strip at both ends shall be retracted into the base, leaving a length of 1-2 cm, and then cut and press into the notch.

What are the precautions for the installation of plastic window sealing strip?

1. Before installing the glass, remove the sundries in the notch, such as mortar, brick chips, wood blocks, etc. When placing the glass, be careful to center it, ensure that the gap on both sides is even, and fix it in time to prevent collision, displacement and deviation from the center of the notch.

2. The rubber sealing strip should not be pulled too tightly, and the blanking length is 2O-30mm longer than the assembly length. When installing, it should be embedded in place and the surface should be straight, so that the stress around the glass can be uniform. The rubber strip at the corner should be disconnected on the inclined plane, and the glue should be glued firmly at the disconnection point.

3, sealant caulking fixed glass, the application of rubber strip or rubber block extrusion glass, glue injection depth should be not less than 5mm, before the glue curing, should keep the glass from vibration.

4. The top is usually installed on the window, around the frame fan or on the sealing bridge to enhance the seal between the frame and the fan.

5. The top specification will affect the watertight performance of sliding doors and windows, and also affect the opening and closing force of doors and windows. Excessive ceiling size or excessive vertical ceiling is not only difficult to assemble, but also increases the moving resistance of doors and windows, especially the initial resistance when opening and the final resistance when closing.