How to maintain the forklift?

Daily maintenance is mainly about cleaning forklift and external inspection. It mainly includes inspection before use, inspection at work and maintenance after warehousing, which is introduced step by step below. Inspection before use: Inspection items (1) Check whether the fuel, lubricating oil, hydraulic oil and cooling liquid are full (2) Check whether the oil and water of the whole vehicle are leaking (3) Check the working conditions of various instruments, signals, lights, switches, buttons and other auxiliary equipment (4) Check whether the engine is normal and working properly (5) Check the steering, braking, tires and traction devices. Technical condition and fastening condition of fork carriage and hydraulic transmission system (7) Check whether the tools and accessories on board are safe. Items to be checked at work: items to be checked after 2 hours of general work (1) Check the working conditions of engine, chassis, working device, hydraulic system, instruments and signal devices (2) Check whether the temperature of axle, brake drum, transmission, torque converter, gear pump and drive axle is normal (3) Check the state and fastening of tires, steering and braking devices (4) Check the oil and coolant. After the maintenance items are returned to the warehouse (1), clean the vehicle (2) and add fuel, and check the lubricating oil, coolant, hydraulic oil and hydraulic oil. If there is no antifreeze or warm storage in winter in the north, put coolant. (3) Check the integrity and tightness of the V-belt. (4) Check the tire pressure. (5) Check whether the tensioning bolts of the fork carriage and the chain hoist are fastened. (6) Check the leakage of lifting oil tank, tilting oil cylinder, steering oil cylinder and pipe joint. (7) Eliminate the faults found in the work. (8) check. Clean the outside of the battery, and check the electrolyte level, cleanliness and fastening of electrode posts and connecting wires; Check distributor contacts and lubricate distributor shaft and cam; Check and tighten the bolts that are easy to loosen outside the vehicle parts; Water pump bearing, steering knuckle kingpin, horizontal tie rod ball pin, inclined oil tank horizontal pin and triple plate center pin; Lubricate and adjust the lifting chain.