When overtaking, why should you slowly step on the accelerator?

The problem you mentioned is very complicated in actual driving, and most experienced drivers have encountered it. Let’s first analyze the reasons: most of them are due to improper operation, generally improper application of gears, and then incorrect judgment of the speed of the vehicle being overtaken and the condition of the road.

Let’s talk about solving this problem. First, preparation before overtaking. Pay attention to the surrounding vehicles, speed, road conditions, etc., and avoid overtaking blindly. Only overtake when you are 100% sure. Inadequate preparation for overtaking is also the direct cause of car accidents. Second, solve the power problem. If it is a manual transmission car, before overtaking, downshift one to two gears and increase the engine speed, which is often referred to as low gear and high speed. Overtaking has sufficient power and can be achieved by refueling. If it is an automatic transmission car without a turbocharger, it will pick up speed slowly and slamming on the gas will not work. You have to wait for the engine to rev up before overtaking before you can overtake. Third, implement overtaking. When overtaking, you must be fast. Never be indecisive or hesitant on the overtaking road. If the car is not strong enough, return to your own lane early. Fourth, you should pay attention to several points when overtaking: 1. Do not overtake by force; 2. Do not overtake on the climb; 3. Do not overtake on the curve; 4. Do not overtake when there is no parking space of your own after overtaking; 5. Do not overtake. An overtaking car; 6. You cannot overtake if the road conditions ahead are unclear; 7. You cannot overtake when you are not sure, etc.

First of all, you must understand that torque is what increases vehicle speed. Only when the torque is large enough can the vehicle speed be increased. Now you need to understand that the lower the gear, the greater the torque. Whether it is automatic or manual, it starts in a low gear. Manual transmission can also start in second gear, but at the same time, the oil clutch must be properly matched. This also increases torque. When you want to increase the speed on the highway, you must downshift to get more torque. Some automatic models have gearboxes that are not very good. I can understand the demand, and sometimes I have to press the accelerator deeply before downshifting. There are also some small-displacement models. Due to their low torque, it will be particularly difficult to speed up above 80 kilometers. This is also reflected in many 2.0T medium and large cars. Above, the speed increase in the front section is no different from that of the 3.8 model, but it will be much slower after reaching 80, so if you want to increase the speed, you have to downshift.