Anti-warping method of wallpaper

Now more and more friends will choose to use wallpaper when decorating the wall, which can make the room or hall look more beautiful, but the wallpaper may become warped after a long time, so what should be done to prevent the wallpaper from becoming warped? Next, I will talk to you about ways to prevent the wallpaper from warping. I hope I can help you.

Brush adhesive solution

Brush adhesive according to the actual situation, you can generally brush the adhesive on the back of the wallpaper (depending on the wallpaper, some people should soak in water in advance before brushing the adhesive). If the grassroots brush is thin and uniform, you have to wait for a while before going to the wall. The effect is good, but you can't let the adhesive dry completely before going to the wall, which is easy to cause the wallpaper to warp.

Special adhesive for wallpaper

Wallpaper should be pasted with wallpaper adhesive. Before you lay the wallpaper, you should try the sample first.

Yang angle treatment

It is strictly forbidden to fit in the external corner, and the wallpaper should be wrapped in the external corner of not less than 20mm, and the wrapped wallpaper must use adhesive with strong adhesion.

Treatment of internal angle

Interior corner wallpaper should be overlapped, and the paper edge should be placed at the interior corner. The overlapping width is generally not less than 2-3 mm..

Choose the right tool

Choose the right tool to paste the wallpaper. In order to make the seam of wallpaper tight, different tools can be used to level and compact according to different types of wallpaper, squeeze out excess glue, and wipe off the residual solution with a wet towel. The pressure should be even along the joint and should not be too large.

Grass-roots drying

When laying wallpaper, attention should be paid to the drying of the pasting base, and the moisture content should be less than 9%. Remove oil and dust from the surface. The uneven surface must be filled with putty.

Pay attention to details.

If the base surface of the wallpaper is rough and dry, you must spray alkyd varnish evenly, and you can spread the wallpaper by touching it with your hands.