Everyone told me how to clean the cabinet Gree air conditioner.

1, the method of cleaning the filter:

When cleaning the filter, cut off the power first, then open the panel and take out the filter. Clean the filter screen with a brush, and then rinse it with clean water. When it is too dirty and greasy, it can be cleaned with detergent or neutral soapy water, rinsed with water, dried and then packaged.

It should be noted that it must not be cleaned with hot water above 40℃. Do not use washing powder, detergent, gasoline, banana oil, etc. So as to avoid deformation of the filter screen.

In addition, after rinsing with clear water, dry it with a soft cloth or put it in the shade to dry. Do not expose yourself to the sun or dry in an open flame such as a stove to avoid deformation of the filter element. After installing the filter screen, plug in the power supply for 3-5 minutes, set the remote control in refrigeration mode, set the temperature at the lowest state, and start the machine.

2. How to remove the air conditioner filter?

Before removing the air-conditioning filter, please carefully open the air-conditioning housing. Generally, there are two small slots stuck on the air conditioner shell, and the outer cover is gently pulled out.

After opening the cover of the air conditioner, there are often two buttons inside, which need to be gently opened to fully open. Next, take the filter. The filter is easy to handle, but it is stuck in several slots. Push the filter element upward first, and then gently pull it out after the lower end comes out of the groove.

Some air conditioners have black particles to strengthen filtration after removing the filter screen, so they should be taken down separately for cleaning and drying.

Then carefully clean the filter screen with clear water for several times, you can brush it with a soft brush for several times, and finally put it in a ventilated place to dry until it is dry. Do not bend the filter when cleaning. Although elastic, plastic can't stand bending.

Supplement:

How to install the air conditioning filter?

Compared with disassembly, it is more troublesome to install the filter, and it takes a lot of effort to do it. When installing, insert the filter along the card slot, and be sure to look at the front and back. The button that protrudes is the back.

Make sure that the inside of the filter is stuck in the groove and will not fall off after the filter is completely inserted. Then press the filter screen without arching, and finally clamp the convex buckle in the groove.