BMW 3 Series Safety Seat Interface, Installation Diagram of BMW 3 Series Safety Seat

The full name of the BMW 3 Series safety seat interface is "International Standards Organization Fix&; English meaning: ISO fixing device. This is a new standard for installing children's seats in cars. This standard is being accepted by many automobile manufacturers, and its function is to make the installation of children's seats quick and simple. Installation of BMW 3 Series Safety Seat: Pull open the ISOFIX connector of child safety seat and insert it into the place marked ISOFIX, so that you can clearly touch the anchor point inside. After alignment, press inward until you hear a crisp click, and it will be installed. The main advantage of ISOFIX is that the ISOFIX device can firmly connect the child car seat with the car. The invention provides a simpler and safer method for installing an automobile seat. It is easier to install a seat with ISOFIX than with a seat belt. ISOFIX device effectively reduces the risk of wrong installation, and the probability of wrong installation is obviously reduced. Note: 1. Don't leave the bayonet in a semi-locked state. In an emergency, the child should be taken out quickly. 2. Do not install the child safety seat on the front seat of the car with airbag. 3. This child safety seat is only suitable for backward installation. 4. Ensure that the tightness of the seat belt and the position of the child safety seat cushion fully meet the requirements of this manual. 5. The car seat belt passing through the child safety seat must be kept fastened. 6. Please don't put anything in the back seat, or these things will hurt the children during emergency braking. 7. If your child safety seat is damaged in the accident, you must replace it with a new one.