How to measure the housing area correctly?

First, how to measure the housing area

The measurement method is relatively simple, and it needs to be measured with a tape measure and the residential floor plan of the house.

1, measured with the residential plan of the house, which will clearly indicate the usable area of each room, the size of the external wall and the axis size of each room.

2. Measure the usable area of the house. You can measure the length and width with a tape measure and then calculate the area. You can add up these areas to calculate the usable area.

3. Measure the wall area of the house. In general, the plaster is about 2 cm to 3 cm.

4. Measuring the balcony construction area of the house is the same as the usable area, but you need to know the specific type of balcony first.

5. Use the sum of the measured usable area, wall area and balcony construction area to get the specific construction area of the house.

2. The measured area is inconsistent with the area stipulated in the contract.

If the measured housing area is inconsistent with the area specified by the developer in the contract, it needs to be handled according to the area error.

1. If the area error is within 3%, the settlement shall be made according to the price agreed in the contract, and the buyer shall be compensated for the house price and interest within 3%.

2. If the error between the areas exceeds 3%, then the developer needs to compensate the house price and interest of the buyers, and at the same time needs double indemnity.

Third, matters needing attention in buying a house

1. When buying a house, you need to know the actual situation of the house clearly. It's best to go to the local field to find out the specific type, quality and area of the house before deciding whether to buy it.

2, and before handing over the house, you need to have a priority room. When inspecting a house, you need to accurately measure the actual area of the house.