How to install court mosquito nets? Complete collection of mosquito nets with different installation methods

Palace mosquito nets are actually similar to ordinary mosquito nets, but there are more styles of palace mosquito nets or some people think they look better. The installation of mosquito nets in court is relatively troublesome, but it will not be too difficult. Next, I will bring you the installation method of the palace mosquito net.

Installation method of court mosquito net-ordinary court mosquito net

1. Before installing the court mosquito net, prepare the pneumatic drill. Generally, 10 drill, No.8 drill, wrench, pliers, tape measure, pencil and other tools should be used.

2. Check whether the accessories of the court mosquito net are complete, such as bracket base, explosion-proof screws, wood screws and mosquito net hooks.

3. The next step is to determine the location of drilling holes. Measure the height you need to install with a tape measure, and then mark the height you need to locate on the wall. Generally marked with a pencil, it is better to erase it.

4, prepare a wet towel, can prevent drilling construction, reduce dust.

5. Install the drill bit of the pneumatic drill, and then drill the hole. When drilling, pay attention to drilling 90 degrees vertically. The depth of the hole depends on the length of the screw. Generally, the hole depth is about 1 mm cm shorter than the screw. If the hole is too deep, it will bring inconvenience to the installation of mosquito net bracket, and the hole must not be larger than the screw. Then, drill in the explosion-proof screws, fix the mosquito net bracket base, and then tighten the screws.

6. Clean up the dust and hang mosquito nets in order.

Installation method of court mosquito net-three-door square account

1, a three-door square account generally has 12 poles and 8 tee joints. Please check whether the materials are ready before installation.

2. First find the bottom and top of the mosquito net. The larger mesh side is the bottom of the mosquito net, and the top and four sides of the mosquito net are fine mesh cloth with lace on it.

3. Identify the positions of poles with different lengths. The specifications of poles depend on the specifications of mosquito nets, but they are generally matched. For example, the specification of 1.8m will have 12 rod, and there will be five specifications, two of which are 2m long, and the other two are 1.8m and1.5m. ..

4. After arranging the positions of rods with various lengths, pass through the holes along the mesh cloth, and then connect the struts with tee joints.

5. Connect the brace with tee, and it will be better to choose the one with screws, because the one with screws will be stronger. If it is 1.5*2.0, the rest is the same, that is, 1.5 meters has six poles, and the bottom of the mosquito net is missing two long poles, and the rest remains unchanged.

My conclusion: The above are the installation methods of mosquito nets in different courts, hoping to bring some help to everyone. The installation of mosquito nets is generally explained, but it is a bit difficult to understand. Installing these depends on feeling and experience. In fact, after more research, you will know how to pretend.