What is the method of making cement flowerpots?

Prepare a container, pour in cement, slowly add water and stir to make a thick and slightly thin slurry, and stir evenly without bubbles.

Apply lubricating oil inside the mold to facilitate subsequent operation. Pour the cement slurry into the prepared mold. Moulds can be purchased, or you can use idle flowerpots at home.

Spread the poured cement slurry evenly, with smooth surface and no bubbles, and drill a small hole at the bottom for drainage. Leave it for an hour or two after application and wait for it to dry. Then demould and tap the mold gently with a shovel, which can make the flowerpot fall off more conveniently. Leave it for a while after falling off. The cement flowerpot is finished.

There is a little cement left in the decoration, and I have a whim to make a cement flowerpot. ? I found a ready-made tool when I first did it. I use a plastic bucket as the outer mold and put a paper shell inside. Three days later, it was taken out. Although it was horrible inside, it was smooth outside. (Figure 6 Figure 7)? So I went home to collect tools and used up the remaining cement. After thinking for a long time, I found that the foam box left by online shopping at home was just the right size. I'm satisfied with it, but it's a little superficial. Not going to polish it. Lines with a little foam feel more textured.

Of course, cement flowerpots can be used to grow flowers. Cement pots are often very permeable, similar to clay pots, but they are often more troublesome to make. Generally, you have to make it with your own mold. But clay pots are already very cheap, but they are not as convenient as clay pots, and it is not convenient to transport anything. Some water tanks made in rural areas are made of cement concrete, and the water contained in them will not leak. So make cement pots, sand and stones.