How to turn the remaining tiles from tile decoration into treasure?

How to turn the remaining tiles from tile decoration into treasure?

There will always be extra tiles when decorating, even if it is accurate, there will be surplus. Even if there are no leftovers, there will be leftovers. It's too much trouble to return it. It's a pity to throw it away if you don't return it. The Nalute polished concrete diamond grindstone is seamless as a whole, cast on site, seamless, that is, there is no bacteria breeding, it looks high-end atmosphere, and it can also release negative oxygen ions, which makes people feel relaxed and happy. This product is wear-resistant and non-slip, and its service life is as long as 20 years. The product components are composed of Nalute anion cement mortar, armored protective concrete sealing curing agent and silk protective concrete sealing curing agent. It is made of pure cement and can be made into S-shaped streamline. In contrast, marble and tiles consume resources and energy and pollute the environment. Marble and tiles are also radioactive.

First, how to turn the remaining tiles into treasure?

1, DIY ceramic tile flowerpot and small gardening landscape.

(1) Ceramic tile flowerpots need some glass glue and marble glue. Remember to knock a hole in the bottom of the pot to facilitate water seepage. Long strips can be used to grow vegetables, and larger ones can be used to grow larger ones or vines.

(2) Small landscape

This must be done according to your own creativity and ideas. It can also be used with flowerpots (especially broken flowerpots, with excellent effect), which is more suitable for a variety of meats.

If there are too many large tiles left, including 10, you can make a ceramic tile cabinet, which is much better than plates.

If it is a building with a yard, build a path or fish pond or something, which is simple and emotional.

Keep the tiles stuck at home and fix them when they are broken. After all, the same brand, the same model of tiles, each batch is different, there will be some color difference.

Of course, the remaining tiles can also be returned to the merchants.

Second, the acceptance of ceramic tile after the shop is stuck

1, check whether the patterns of ceramic tiles are consistent, whether the waist line flower pieces are matched, and whether the pasting position is reasonable. Tiles in the same space should have clean surfaces and consistent and clear patterns. Under normal circumstances, the waist line is stuck on the third brick about 0.9 meters high from the ground, that is, the bricks with ordinary specifications (ordinary small wall and floor tiles with specifications of 300*300, 300 * 450 and 300 * 600), and the decals of the fifth and sixth bricks (according to the size of the flower pieces). Some tiles are divided into upper waistline and lower waistline. Usually the upper waistline is narrow and the lower waistline is wide. The upper waistline is usually stuck about a brick from the top, and flowers with complex patterns are usually easy to be reversed, which requires careful attention.

2, check whether there is any color difference, tile off block, tile cracks and other phenomena. That is, under the same light intensity, we can see whether the colors of tiles are consistent, and most of them are light and dark. Check whether the tiles are complete, whether there are porcelain drops, missing corners, cracks, stains and other phenomena, improper transportation, poor workmanship and so on will knock against the tiles. If this situation is found, workers may be required to replace tiles.

3, check whether the brick joint (floor tile) is uniform, straight and flat; Whether the joints (wall tiles) are even and whether there are any omissions. The common paving methods of large floor tiles are joint paving and seamless paving. It is best to use joint paving, but pay attention to the uniform and straight brick joints, and do not have large and small brick joints or skew, which may be caused by irregular bricks, unqualified sizes, or improper brick cutting by the paving workers or irregular joints. You can take a rest with the packing belt outside the packing box on the ground, simply insert it into the brick seam and insert it just right. If the brick seam is not suitable, you can ask the workers to sew beautifully. Wipe the seams evenly, and each seam should be carefully filled, without omission.

4, check the smoothness of the shop is stuck, with hands or feet, slowly on the surface of the brick, feel whether there will be obstacles, especially the opposite side of the brick, and whether the diagonal lines of the four bricks are flush. This kind of situation is either that the brick itself bulges and the corner falls seriously, or that the workers have not constructed as required. In serious cases, workers may be required to replace bricks.

5, check whether there is empty drum phenomenon. Tap the brick surface gently with a small hammer or other blunt and hard objects (not sharp). If there is a dull sound, it means that the cement behind the brick is full; If there is a crisp "thump" sound, it is empty drum. Workers cut corners, cement is not full, not dense enough, or bricks are not well maintained, empty drums will occur. More empty drums may require workers to repave them.

6. Check whether the ground is flooded, especially the kitchen, bathroom and balcony. After cleaning, pour water on the ground to see if there will be water on the ground. If there is reverse flooding, it is because the workers did not put the slope when paving, or the slope was not allowed, local water accumulated, or the floor drain was higher than the ground.