How to cut your own hair

Tools: hair clipper, positioning comb, comb, cloth.

1, after charging, you can apply a little special lubricant on the electric push-cutting tool bit, which can protect the tool bit and reduce the noise when the tool bit works. According to the length of hair you want to keep, choose the corresponding electric hair clipper and position the comb on the head.

The specification of the positioning comb is 3 to18mm. 2. Put on the cloth, open the electric clipper, position the hair of the electric clipper, gently comb the scalp, and push the hair from the hair feet to the top of the head.

It can not only make hair shorter, but also make hair flat and even in length. 3. After positioning the electric clipper, turn off the electric clipper first, and then remove the positioning comb on the head of the electric clipper.

Then, carefully trim your hair with an electric clipper. 4. When trimming the hair angle on the skull, it is best to have a mirror in front of each other.

The repair of the posterior skull can be observed through the front and rear mirrors. The repair of the posterior skull is the most important step in the whole hair beauty.

After the final trimming, you can look in the mirror to see the effect. .

How to cut your own hair

1, the side and back of the head are clamped with a 3mm long electric pusher and pushed directly. Pay attention to leave some hair between the side, the back of the head and the top of the head, and don't touch it. This part of the hair is finally trimmed to ensure that the two parts of the hair have a transition.

Pay attention to press the scalp tightly and push it several times to prevent long hair. When cutting the hair at the back of the head, you can only feel the length of the hair with your fingers and repair it.

2. Try to trim the hair on the top of your head with a dental clipper. Where the hair is dense, you only need to use dental scissors above the hair root 1cm. If you need to cut it short, cut it a few times with a nail knife at the required length. 3. The transition zone can be treated slowly with dental scissors to make the transition between the two parts very smooth.

It's time-consuming. You can also use an electric clipper to clip out a certain length (to avoid accidental hand injury) and gently "brush" the hair in the transition part. The transition area will be smooth after a few more rubs (this method involves advanced skills and steady hands that have been practiced for more than ten years, please try again after more exercise).

The transition area from the back of the head to the top of the head is difficult to handle, so it is recommended to repair it slowly with dental scissors. 4. Finally, trim the hair of ears and sideburns.

Hair on the sideburns is very important. This part of the hair and the hair on the neck can be trimmed with an electric razor.

How to cut your own hair?

First of all, if you don't have enough skills and skills, you may not see anyone when you cut your hair at home. Secondly, don't forget to choose a suitable pair of scissors. If you don't have professional scissors, you must choose sharp ones. It is impossible to cut a large piece of hair with a eyebrow trimmer! I believe the following haircut tips can help you create a perfect hairstyle!

Tip 1: Try not to do it alone.

Try not to do it alone.

Under normal circumstances, you can only see the effect of cutting off the front in front of the mirror. It's better to have someone present to check your hair on both sides and back. They can correct your mistakes in the first time and prevent major mistakes.

Tip 2: Don't challenge the difficulty.

Don't challenge the difficulty.

If it is the first time to cut your own hair, don't cut some difficult hairstyles. First, let's trim bangs or hair tips. Appropriate levels and angles are not as simple as you think. They need quite good technology, so it is enough to try the uniform length pruning technology for the first time.

Tip 3: Use your finger as a ruler.

Use your finger as a ruler.

Scissors are very easy to deviate, so it is best to hold that part of hair with your fingers in parallel when cutting, so as to ensure that the hair is even.

Tip 4: cut your hair when it's wet.

Cut it when it's wet

Hair is easiest to cut when it is wet. Look up, comb your hair with a comb and cut it straight. People with sparse hair are best suited to cut their hair like this.

Tip 5: Trim less each knife.

Trim a little less each knife.

Don't try to cut the ideal hairstyle with one knife. It's best to cut it shorter than you think every time, keep a little hair and keep the hairstyle balanced. In addition,

Curly hair will be shorter when dry than when wet. Don't ignore this.

Have you learned the skill of cutting hair at home? With these five tips, you can easily cut a beautiful hairstyle!

Cut your own hair.

(digression first, ha)

I haven't been to the barber shop for three years, so I cut it myself.

But I usually cut bangs. I seldom cut my back.

But there was still a mistake. I slipped my hand and cut it a little crooked, but I felt uncomfortable when others said nothing.

Besides, I have been holding my hair (curly) for five years, and I burned my face two days ago. I think I am very interesting. I often burn my face. Because I was looking in the mirror, I thought I turned left, but I turned right. I don't know what I was thinking ... this time I burned my face with a stick because my hair grip was loose.

Said a lot of nonsense, ha. !

Well, how can I put it? You can't see the hair in the back. Only by feeling. It's hard to see before and after two mirrors, isn't it? ) It's easy to cut your hair by feeling. Unless you are absolutely sure.

Some of my friends run barbershops, but they don't cut their own hair. Instead, tell each other what hairstyle they want, and then cut it themselves and cut out their own style. At best, they cut it and fix it themselves.

Actually, it's better to go to the barber shop. If you are confident, you can come back and fix it again. If you want to cut a lot, you'd better go to the barber shop.

If you just want to cut a little, trim it and spread it in layers, the third floor is right, but how to comb the hair at the back at 90 degrees? It's usually crooked. Since you have professional tools, you can manage the hair layer with a comb cutter. Very useful. According to your information, it's a boy, so I recommend that you comb your teeth and cut your hair at home.

But girls should not use comb-tooth scissors (a friend who runs a barber shop told me)

How to cut your hair?

Tools: hair clipper, positioning comb, comb, cloth.

1, after charging, you can apply a little special lubricant on the electric push-cutting tool bit, which can protect the tool bit and reduce the noise when the tool bit works. According to the length of hair you want to keep, choose the corresponding electric hair clipper and position the comb on the head. The specification of the positioning comb is 3 to18mm.

2. Put on the cloth, open the electric clipper, position the hair of the electric clipper, gently comb the scalp, and push the hair from the hair feet to the top of the head. It can not only make hair shorter, but also make hair flat and even in length.

3. After positioning the electric clipper, turn off the electric clipper first, and then remove the positioning comb on the head of the electric clipper. Then, carefully trim your hair with an electric clipper.

4. When trimming the hair angle on the skull, it is best to have a mirror in front of each other. The repair of the posterior skull can be observed through the front and rear mirrors. The repair of the posterior skull is the most important step in the whole hair beauty.

After the final trimming, you can look in the mirror to see the effect.

How to cut your own hair

1, the side and back of the head are clamped with a 3mm long electric pusher and pushed directly. Pay attention to leave some hair between the side, the back of the head and the top of the head, and don't touch it. This part of the hair is finally trimmed to ensure that the two parts of the hair have a transition. Pay attention to press the scalp tightly and push it several times to prevent long hair. When cutting the hair at the back of the head, you can only feel the length of the hair with your fingers and repair it.

2. Try to trim the hair on the top of your head with a dental clipper. Where the hair is dense, you only need to cut it with a tooth clipper at the position 1cm above the hair root. If you need to cut it short, cut it a few times with a nail knife at the required length.

3. The transition zone can be treated slowly with dental scissors to make the transition between the two parts very smooth. It's time-consuming. You can also use an electric clipper to clip out a certain length (to avoid accidental hand injury) and gently "brush" the hair in the transition part. The transition area will be smooth after a few more rubs (this method involves advanced skills and steady hands that have been practiced for more than ten years, please try again after more exercise). The transition area from the back of the head to the top of the head is difficult to handle, so it is recommended to repair it slowly with dental scissors.

4. Finally, trim the hair of ears and sideburns. Hair on the sideburns is very important. This part of the hair and the hair on the neck can be trimmed with an electric razor.

What tools do I need to buy for my own haircut?

The tools used in the process of haircut are: hair clipper, comb, barber clip and sponge.

1. Barber scissors: the most critical tool in hairdressing. Buying a family-specific hair clipper has become one of the necessary standards for many emerging home care appliances. 2. Comb: Comb the hair during the haircut, usually used with hair clipper.

3. Barber scissors: during the haircut, trim some hair that doesn't need to be trimmed for the time being. 4. Sponge: used to clean up the broken hair after hair trimming.

Extended information hair clipper Common Sense: 1. Remember to turn off the power after each use. 2. Dry hair is easier to trim than wet hair.

3. Never put the baby hair clipper in the water or trim the hair that is too wet, otherwise it will easily lead to circuit failure. 4. After the failure, it is forbidden to disassemble, repair or refit hair clipper without permission.

5. When trimming sideburns, ears and other parts, don't use too much force and don't be too close to the skin. Maintenance: 1. Maintenance of cutter head: Children's hair clipper used at home is basically waterproof.

After the haircut, remove the cutter head, clean the dandruff in the direction of the blade with a small brush, and then wash the cutter head with water. Be sure to dry it after cleaning to prevent rust.

After the cutter head is completely dry, drop a few drops of lubricant on the blade. Remember to change the cutter head regularly.

2. Maintenance of the fuselage: Clean the broken hairs on the motor head of the fuselage with a small brush, and do not wash the motor head with water to prevent the fuselage from entering water. 3. Battery maintenance: In order to maintain the service life of the battery, it is best to fully charge the battery after use.