Joke Collection Website - Talk about mood - How to make cabinets with tiles? Manufacturing requirements of ceramic tile cabinets

How to make cabinets with tiles? Manufacturing requirements of ceramic tile cabinets

There are 12 steps to make ceramic tile kitchen cabinets.

1 First of all, we must determine the size of the stove and try our best to ensure that the whole tile can be laid, so that the later construction is more convenient.

2. Measure a suitable short lead (or make a frame with wooden strips) with a thickness of about 4 ~ 5 cm.

3. Tie the steel keel of the bottom blank of the desktop, make a circle around it according to the size of the wooden frame, and vertically tie it into a # shape every 10CM in the circle.

4. Spread oiled paper or newspaper on the clean floor and put the wooden frame on the paper.

5. Start mud operation, put a thin layer of cement yellow mortar on the wooden frame, and place the steel keel in the wooden frame.

6. Pour the fine stone concrete into the wooden frame, then tamp it with tools, and the surface shall be leveled. The dosage of cement should not be too small, otherwise it is likely to cause the mesa bottom blank to be too thin and easy to be damaged.

7. After standing for half an hour, you can clearly see that the concrete surface absorbs water, then beat the concrete surface with an iron trowel, and then rub the concrete surface with a wood trowel to make the surface smoother and rougher. At this time, start to cover and maintain with wet straw bags or broken sacks, and it is best not to move during this period.

8. The curing time is three days. Then the wooden frame can be dismantled.

9. Before tiling, tile shall be laid horizontally and vertically on the cement floor in the order of leveling first and then standing, and the thickness of adhesive is about 0.2~0.3CM.

1 1, vertical brick laying, adhesive thickness is not more than 0.2 ~ 0.3 cm, to adapt to the size of the flat brick flange.

12. After the vertical brick is fixed, lay a layer of ceramic tile on it. After laying a layer, you can lay another layer on it with cut broken tiles to increase the height of the countertop.

Villa master provides you with local architectural policies, architectural drawings and villa design drawings;

Villa appearance rendering service, thousands of red hot drawings for you to choose from: bdfc