Steps to decorate the measuring room

Measuring the house is the basis of design. Only after the designer thoroughly understands the structure of the house can he make the design scheme of house decoration more efficiently. Today, Bian Xiao talks about the steps and precautions of house decoration.

1. What is the main quantity of measuring room?

The methods of measuring rooms are generally divided into quantitative measurement and positioning measurement. Quantitative measurement is mainly to measure the length, width and height of each space in the house. Positioning measurement, indicating the size of doors, windows, air conditioning holes, etc. You can also measure the distance between sewer pipes, smoke pipes and gas pipes. And is convenient for later positioning and installation.

Second, why do you want to measure the room for decoration?

Through the measurement of the house, we can accurately know the length, width and height of each space in the house, as well as the positions of doors, windows, air conditioning, heating, bathroom, water supply and drainage, etc. , so as to make a specific design scheme, otherwise there will be problems in the later period, which will cause economic losses when replacing the position and furniture. Secondly, we can know the frame quality of the building through field measurement. Only after using the wall detector to detect whether the wall is a load-bearing wall can we make a safe and satisfactory design according to the owner's needs.

Third, the steps and precautions of house decoration

1, you need to bring enough tools before measuring the house. The tools for measuring the room are generally tape measure, paper, pen and camera (mobile phone). You can bring two pens with different colors to mark different data.

2. Prepare the floor plan of the house.

Take the original floor plan of the house with you when measuring the house, and mark the measured data on the floor plan from the moment you enter the door.

3, the order of the measuring room

The order of measuring rooms can start from the entrance door, start from the entrance door on one side and finally return to the entrance door on the other side. According to the order from left to right, start the measurement from room to room. If it is not a single-storey building, it is necessary to measure one floor before measuring another. The measurement contents include: structural dimensions of all rooms, including but not limited to wall dimensions and wall thickness; The size of the crib, the width and height of doors, windows and holes; Flue size; Tall. And measure the length, width and height of each area of the house, and verify the area of the living room, bedroom, kitchen and other areas.

4. Record data accurately

When measuring a house, we should accurately measure the length, width and height of the whole house. When measuring the joint between two spaces, whether there are doors and windows, water and electricity pipes, switch lights, etc. between the joints should be marked down. Indicate the location of doors, windows and air conditioning holes. In the measurement of kitchen, we should do a good job in locating the relevant positions such as the upper and lower water pipes, gas pipes, oil fume pipes and floor drains, while in the bathroom, we should do a good job in measuring the hole spacing, distance from the wall, distance under the pipe and floor drain position of the bathroom. There are also measurements of the position, width and height of strong current and weak current.