I know. How to install the balcony hanger?

The hand shake is generally installed on the right side of the balcony, which is convenient for habitual use. The distance from the ground is generally 120cm, depending on the user's height. Fix with expansion screws.

Install the two top seats:

At the top of the balcony to be installed, measure the diameter of the lighting lamp at the top of the balcony with a steel ruler, and then mark the installation between the two sides of the lamp 15cm-30cm (the length depends on the size of the balcony). Then measure the distance from the mark to the balcony edge, and determine the width of the top seat installation according to this distance. Then measure the length of the balcony with the lamp as the center. According to the length of the clothes drying rod, determine that both sides of the lamp are equally divided into 80 cm- 100 cm, and then there are four intersections with the measuring distance of the width, which are the installation positions of the top seat of the clothes hanger. After the position is determined, drill a hole with an electric drill. After drilling, fix the four top seats with expansion screws (if the rod length exceeds the normal size, adjust the distance accordingly).

Note: The two top seats near the crank angle are movable ends. The other two top seats are fixed seats. The difference between the two is that the movable seat is two-wheeled, and the movable seat must be installed in the front.

3. Installation corner: the corner can be installed on the roof or wall of the balcony. The corner is 50-70 cm away from the movable top seat, and it must be triangular (45 degrees) in the middle of the movable top seat, keeping the same vertical line with the installation position of the handle. Please refer to the drawing.