Do the same job, which one consumes more fuel, a 30 forklift or a 50 forklift?

Your question is wrong, 30 shovels are not that different from 50 shovels! For example, loading a 30-shovel 18 square meter car is not high enough at all, and it is not enough to install it on a slope. 50 shovel If the driver is skilled, loading with a forklift is generally only about 2 square meters less than that of an excavator. 30 shovel is basically used for feeding in mixing station or tamping coal in coal yard. Don't use 30 shovels in the sand and gravel factory, because it seems to save fuel, but the output value is low, and there are other costs-personnel salary, accessories, maintenance, etc. -It adds up to a chicken rib ~ ~

Earthwork should use at least 40 shovels, and 40 shovels (such as Carter and Komatsu) should be used well, not worse than 50 shovels. However, we must find a good driver and try not to have many people driving the equipment. Be careful with the equipment and save all the money! ! !

Let me answer your question again: brother, I use it myself, and the fuel consumption of 50% is definitely high. I mean, the same car is loaded with sand, which consumes more fuel, so 50 fast consumes more fuel, 30 slow, takes a long time and consumes less fuel. ...

Look at this: to load 50 cars every day, you must use a big shovel. It takes 4 minutes for 50 shovels to load a car, and it takes twice as long for 30 shovels. It's not enough to load, so compare yourself ~ ~