What is the thickness of anticorrosive wood and how to choose anticorrosive wood?

In life, some people will use anticorrosive wood when making furniture, but we don't know much about the thickness and how to buy anticorrosive wood when buying it. Next, the thickness of anticorrosive wood and how to choose anticorrosive wood are introduced for your reference.

1. What is the thickness of anticorrosive wood?

1. First of all, 21* 95,25 * 95: Suitable for balcony floor, sauna floor, ceiling, stool surface, fence board, lattice and hanging board of villa exterior wall.

2. Then, 8*95, 30*95: suitable for terrace floor, platform, walkway, square pavement, wooden bridge surface, stool surface, flower stand and flower box side plate.

3. There are also 45 * 95,45 *120: main beams suitable for floors (swimming pools, long dikes), elevated platforms, flower beds and pavilions.

4. Then, 45* 145: It is suitable for floor (plank road) and overhead platform keel.

5. The last 70* 195: It is applicable to the floor (swimming pool, long beach) and main beam of the flower frame structure.

6.95*95: Suitable for colonnade and footstool.

7.70*70, 80*80: Suitable for wooden columns, keels, boards, etc.

8.30*50: Suitable for balcony keel.

9.50*70: Suitable for keel of terrace.

10.20* 100: Suitable for roofs, stools, fences, floors and walls.

2. How to choose anticorrosive wood?

1. First, check the color of anticorrosive wood, but from the appearance color, some anticorrosive wood is generally green or blue-green, so this is because CCA or ACQ wood preservatives contain copper oxide. Yes, but color is not the main quality index of anticorrosive wood. In particular, some unscrupulous manufacturers use simple methods such as soaking or even painting to pretend to be qualified anticorrosive wood, so consumers must pay more attention.

2. Next, check the surface quality of anticorrosive wood, and pay attention to check whether there are knots, cracks and deformation on the wood surface. However, scarring not only affects the beauty of wood, but also is an important channel for bacteria and insects to erode wood. Cracks and deformation are mainly caused by improper drying treatment. However, the moisture content of wood treated with antiseptic is generally below 18%, and it will not crack and deform if it is placed in the air.

3. More importantly, check the smoothness of anti-corrosion wood, and then check the effect of anti-corrosion treatment, but you can visually check the surface smoothness of anti-corrosion wood. There are impurities such as powder on the surface that have not been well chemically treated, but the color is uneven, so it is best not to choose.

When we bought anticorrosive wood, we didn't know the thickness. The above article is about the thickness of anticorrosive wood and how to choose anticorrosive wood.