Detailed explanation of installation skills of solid wood wardrobe, a must-have item in home improvement

Detailed explanation of installation skills of solid wood wardrobe;

1, clean the position of the wardrobe first, or install it, and then drag the wardrobe, which may scratch the floor. Doors and mirrors are made of glass. While paying attention to the logo on the box, even the installation owner has been doing this work. You should carefully check the relevant drawings.

2. The wardrobe board is environmentally friendly, with a piece of wood inside (the old wood is broken and not bonded) and a veneer outside. It is usually slotted in the factory and then glued, so there is incision operation before use.

3. Fix the screws and wooden pins at the front and back of the wardrobe base first, and then screw on the spiral fasteners. If the gap between the two plates is slightly larger, you can take a picture and screw it clockwise with a screwdriver. From the inside out, from the bottom to the top of the partition.

4. There will be some behind the board, but technicians will still measure the size of the block and proofread it to avoid installation errors, which will lead to re-installation after rework. After clamping the top plate, tighten the outside of the plate assembly clockwise. Finished, reloaded into the hanger.