Method and technology of making paper-cut

The making method and process of paper-cutting are as follows:

Tools: origami, carbon pen, scissors.

1. Fold the red paper diagonally once, and be sure to flatten it. Because this paper-cut should be folded in multiple layers, each layer should be as strong as possible.

2. Fold the folded paper in half along the center line so that two 45-degree angles overlap.

3. Fold the folded paper to both sides along the center line and continue to overlap the two 45-degree angles.

4. Folding in half again is different from the last two times. This time, one of the 45-degree angle pairs is folded in half. This time, the other side did not form an alliance.

5. Draw a pattern on the short side, as shown in the figure.

6. Cut off all shadow parts with scissors along the underlined part. Pay attention to cut slowly, it will be easy to cut if you are not careful.

7. After cutting, spread out all the red paper. In this way, a beautiful paper-cut work-window cut was cut successfully.