What's the difference between coated wall cloth and non-woven fabric wall covering? How to apply the wall coating?

There are many kinds of wall coatings, and different wall coatings have different functions and characteristics. Let's take coated wall cloth and non-woven fabric wall covering as an example. It looks very similar, but in fact it is very different and the structure is different. Today, Bian Xiao will talk to you about the difference between coated wall cloth and non-woven fabric wall covering, and how to construct coated wall covering. I hope I can help you to some extent.

1. What's the difference between coated wall cloth and nonwoven wall covering?

1, different characteristics

Paint wall coating: it is a seamless wall coating. The back of the wall coating is coated, which can avoid the leakage of glue and wall stains during construction.

Non-woven wall: the surface layer is woven fabric and the bottom layer is non-woven. The surface layer and the bottom layer are compounded to form a non-woven wall covering.

2, the construction is different

Paint wall covering: generally airtight, so when construction is needed, the glue should not be too thin, and it should be brushed evenly, not too thick, to avoid dry and moldy glue layer; The bottom of the coating is not easy to ooze glue, and the wall covering extensibility of the coating is relatively stable, and the cutting effect is better.

Non-woven wall coating: construction and coating wall coating are basically the same, but the requirements for glue mixing and brushing are more stringent. Bo Tu should be concentrated, and the glue should be evenly brushed, especially the internal corners and edge positions must be well controlled.

Second, how to paint the wall cloth?

1, wall treatment

Before pasting the painted wall coating, the wall should be treated first, that is, the impurities and dust on the wall should be removed with a scraper. If there are cracks or grooves in the wall, plaster powder should be laid. And if the wall is soft, first coat the basement membrane to make the wall more firm, so that the coating wall covering will not fall off.

2, the shop is stuck coating metope

First, check the product information, model, meter number and color, and check whether there is any damage or stain; Two people cooperate, one is to put the cloth and the other is to stick it, and wipe off the excess glue in time; Choose an inconspicuous corner to start and ensure vertical paving. If the middle wall is abnormal, the construction must be stopped; Also cut doors, windows, switches, etc. , and be sure to operate carefully; It is very important to handle the angle of yin and yang. If it is not straight, pay attention to splicing and cutting.

Step 3 trim the edges

After the coated wall coating is pasted, the redundant part of the wall coating should be cut off, and the trimming should be sharp to prevent the uneven edge from affecting the appearance. Wipe the glue on the surface with a sponge or rag to prevent wall covering from turning yellow after drying. If bubbles are found in the wall covering, they need to be cut with a knife, stuck inside and flattened.

The above information is shared by Bian Xiao about the difference between coated wall cloth and non-woven fabric wall covering and how to construct coated wall covering. I hope it helps you.