The manufacturing method of the flowerpot is simple.

The simplest method for making flowerpots is as follows:

Material preparation: discarded cartons, several used kraft paper bags, paper cutters and glue.

Operating steps:

1, corrugated cardboard, which is strong enough to make flowerpots. Take it apart and have a look. Cut it into strips.

2. Make the cardboard cut from the carton into an oval long basin with sealant tape.

3. Stick it on with adhesive tape.

4. Then, tear off the kraft paper bag, grow a long strip of paper, rub the paper into a rope, then stick it round and round and stick it outside the oval basin made above.

5, put two pots of small flowers, today's DIY is completed.

Extended data

Pay attention to the size and height when choosing to buy flowerpots. Specifically, there are three criteria for purchasing flowerpots:

1. The diameter of the mouth of the flowerpot is roughly the same as the diameter of the plant crown. The flowerpot is too big, which affects the appearance. In addition, flowerpots are large and plants are small, so the water absorption capacity of plants is relatively weak. After watering, the pot soil remains moist for a long time, making it difficult for flowers and trees to breathe, which easily leads to root rot.

2. After the plants with mud are put into the flowerpot, a space of 2-4 cm should be left around the flowerpot to add new soil.

3. Plants without soil should be able to stretch without bending when putting their roots in flowerpots. If the taproot or fibrous root is too long, it can be trimmed and planted in potted plants.