What paint to use to brush furniture and how to brush furniture.

In addition to the walls, furniture also needs painting, which can make the overall decoration style of the house more consistent. Next, Bian Xiao will talk to you about what kind of paint is suitable for furniture and how to paint furniture.

1. What paint should I paint the furniture?

It depends on the material of your furniture and your color requirements for it. General furniture paint can be divided into varnish, colored paint and translucent paint according to the decoration effect.

Varnish means that the texture and color of wood itself can still be seen after painting. Suitable for floor, wooden door, window, furniture and other decorations with strong objectivity of wood grain. After painting, the appearance is crystal clear and the construction is simple and convenient.

Paint is the color that completely covers the wood itself after painting and only shows the color of the paint itself. Suitable for plywood and density board.

Translucent paint means that the texture of wood itself is clearly visible and has a colored effect after painting. Suitable for wooden doors, windows and furniture with clear wood grain and loose wood.

Second, how to paint furniture

1, painting, when painting wood, primer is a very important process. Primer also needs to know the density of wood. Hardwoods with high density can be thinned, while cork primer should be thickened. When you start to brush, brush evenly along the grain of wood, not too thick. After the wood paint is completely dried, use sandpaper to polish it until it feels smooth and has no protrusions. Then wipe it several times with a soft wet cloth and dry it.

After the second brush, the paint will be thinned. After brushing, you can cover the wood paint brushed for the second time, and then polish it with water sandpaper of more than 500 meshes along the direction of painting and polish it evenly. The use of rubbing can save the amount of wood paint. After the second paint or the first paint dries, immediately wipe the wood surface with clean cotton cloth to make the wood surface smooth.

After the third brushing, it should be polished with fine water sandpaper, dipped in water and polished evenly, neither too heavy nor too light. There is no need to polish after the last painting. You can apply a layer of furniture protection wax. The effect of high-grade furniture can be achieved by increasing rubbing times, polishing with fine sandpaper after each rubbing, rubbing once thinly and drying the surface.

2, grinding, find a cuboid, it is more appropriate to hold it with your hand. Wrap one plane with sandpaper, press it by hand and polish it. The direction order of grinding plane is: first horizontal, then vertical. When polishing, you should go up first and then down, first outside and then inside. The choice of sandpaper is coarse before fine. On the one hand, it removes impurities from the original paint and paint surface, on the other hand, it increases the adhesion of new paint.

3. After polishing, check whether the furniture is uneven. If there is, level it with putty and polish it again to a flat state. Then protect the furniture and floor to prevent paint from polluting these places. Wipe the furniture with a wet towel dipped in a little water. Stir the barrel paint evenly with a stick. Don't move your hands too fast to avoid splashing.

4, paint layer protection, usually after the furniture is painted, it is necessary to brush varnish to protect and brighten the paint layer. Varnish is also applied in the same way as paint. It is recommended to apply varnish twice. If hair falls off the brush, it must be dealt with in time. Note that varnish only brushes the surface of furniture, not the inside.

The above is an introduction to the method of furniture painting, which requires complicated and meticulous procedures and is more suitable for professionals. I hope the above content will be helpful to everyone.