Joke Collection Website - Talk about mood - How to use Gillette razor?
How to use Gillette razor?
Question 2: How to use Gillette shaving foam? Wash your beard first, moisten it with warm water, lubricate and soften it with foam, and then you can shave.
How much depends on your habits
Question 3: How to replace the head of Gillette shaver? The first step is to open the head cover of the shaver.
Then we can clearly see the whole rest of the shaver. Note that there is a snap button in the middle of the tool holder, and you can easily remove the tool holder by pressing it in the middle. Be careful not to break both sides.
Take out the tool rest, you can clearly see two groups of tool bits, and then pull out the tool bits to the left and right sides, so that you can clean the tool rest or replace the tool bits.
After cleaning, it can be assembled according to the original steps.
Question 4: How to use Geely razor and how to put the blade? There is a button on the back of the blade. If you press it, the blade will pop up automatically. Take out the new blade, stick it in the original position of the knife sea, press it hard and install it automatically.
Question 5: How to use the electric shaver correctly? The use of electric shavers is also very particular. Say the correct usage first: 1. Never shave at the beginning of washing your face. At this time, the beard has not been done well, and it is not easy to shave. It needs to be repeated many times. After scraping, the skin will feel tight and easily damage the skin surface. At the same time, because the dirt on the skin surface is not cleaned, if the skin is damaged during shaving, it is easy to be infected with germs. In addition, due to insufficient preparation, it is easy to damage the blade during shaving and shorten the life of the blade. Shaving after washing your face can reduce infection to a minimum. 3. Choose to shave when the skin is in good condition and the beard is soft, so you don't have to shave repeatedly, which not only protects the skin and beard, but also protects the knife edge and prolongs the service life of the tablet. The state of beard is the most important when shaving. You can apply warm water or hot water in advance to open skin pores, and then use shaving cream with protective and moisturizing functions to help shave. 5. The best time to shave is just after taking a shower, when the soft beard state is most conducive to shaving; The second chance is that in the middle of the bath, steam will open the pores of facial skin, which will help deepen the thoroughness of shaving. 6. Avoid dry shaving. This shaving method will make your skin burn and cause your beard to grow in. 7. It's best to shave twice when shaving. The first shave along the direction of beard growth can shave off 80% of the beard. The second time you shave against the direction of beard growth, which can make your shaving effect more obvious. Note: Avoid the first reverse shaving. 8. You should apply shaving cream every time you shave. 9. The harder you shave, the cleaner your beard will be. This will destroy the protective layer of the skin, make the skin have a stronger burning sensation, and seriously damage the skin tissue, causing skin allergies, injuries and ulcers. 10, the hair quality is different, and there may be curly hair or bristles inside. When cleaning this beard, don't pull it out with tweezers, but pull it off and shave it off with a razor. When shaving, try to make the beard soft and moist, which is beneficial to shaving. 1 1, people with * * skin color or dry skin are prone to burning after shaving. The main way to relieve it is to moisturize the skin, and even use moisturizing products twice. 12. The weight, handle, balance and blade selection of shaver can be decided according to personal preferences and habits. The shaving effect of double-layer or triple-layer shaver is excellent, comparable to the professional level of barber shop. 13, when the blade is not sharp enough, it should be replaced in time. 14. If your beard grows luxuriantly and needs to be shaved every day, it will cause your skin tissue to bear too much * * * and reduce the moisture of your skin. You need to wash your face with cold water after shaving to close the pores of facial skin, and then use aftershave care products with moisturizing effect. 15. Avoid using cologne with too much alcohol on your face.
Question 6: Which Gillette razor works well? 1. The first one is Feng Wei. I used this for a while in college. At that time, Su Feng III seemed to have just come out, and it was expensive. In my impression, it seems that Weifeng sells for 50+ with two blades and Su Feng sells for 100. I didn't have pocket money at school, and I felt super expensive, so I bought Weifeng. This product left a bad impression on me. First of all, the shaving speed is slow. Because the cutter head is small and the moving range is small, the veneer effect is not very good. I have to look for them one by one. I shave for a long time and often get stuck. The gap between the two blades is also large, which leads to pimples on my face and bleeding when shaving. Very tragic. As a result, after using this product for less than a month, I threw away the blade, gave the handle and two other blades to my roommate and continued to use my motor. ...
2. After going to work, I felt that the electric car could never be scraped clean, so I spent 70+ on a Su Fengsan at the supermarket discount.
The first time I felt shaving was from the top three. At that time, I didn't foam, just put some soap on my face, but the feeling of scraping along was really the same as Dove's chocolate advertisement: silky feeling, so cool, the range of motion of the cutter head is quite large, and the effect of sticking to my face is very good. My beard came off as soon as I cut it. There is no resistance in reverse scraping, and it can be easily scraped clean. Then the electric car stopped for two months. At that time, blade consumables were still quite expensive. I have a thick beard and basically have two blades a month. It was really painful, so I saved a few blades at a discount and took them out when I was happy. Usually mainly use electricity.
3. After that, the front is hidden. Because the front speed three blades have not been used up, they have not been changed. Later, I caught up with Gillette's Tmall store for a discount, and the front hidden tool holder+one knife 60+ was still worth it. I bought something else and brought two. I gave my father the first speed three and the remaining two useless blades. He usually doesn't have to use it manually, only when the electric knife is dead.
I have to say, Yin Feng is so cool. In fact, the first speed is good, but occasionally there is a feeling of unsmooth. When the front is hidden and scraped smoothly, it is really a knife to the end, extremely smooth, and the reverse scraping is also very cool. If you go down with a knife, the stubble will be completely removed, and no matter how hard your chin is, you will not feel the stubble. In this respect, electric shavers can't catch up with flattery. At the same time, because there are five blades, the blade density is increased, so it is not easy to scratch if there are acne, and the effect of sticking to the face is as good as ever. If you have acne, don't worry, and the comfort is greatly improved. The only drawback is that the upper lip and neck root are prone to bleeding when scraping backwards. Yin Feng is much cheaper now. Even if you like to use electric ones at ordinary times, you can prepare one and use it when you are happy. Super cool.
In addition, the front hidden, front hidden ultra-smooth and various front hidden power versions of the cutting head can be universal. If they are all hidden in front or super smooth, the electric version and the manual version are only different in color, and there is no difference in function and structure. However, the blade of Qianyin series is a little different from that of Super Shun series.
As far as my personal experience is concerned, the resistance of using ultra-smooth cutter head is less than that of the front cover, in other words, the smoothness will be better. Super Shun claims that a blade is thinner and the shaving effect is better. To tell you the truth, I have no feelings about it. However, in the case of insufficient lubrication, the old version of Yin Feng is indeed easier to get stuck than Super Shun. So buy a replacement drill and buy it directly. Don't be greedy for cheap old editions. I just try to buy cheap old versions. They all say to buy new ones instead of old ones. This is the lesson.
4. Then the front is hidden and smooth. This product is actually a super-smooth enhanced version, which adds the functions of electric and cutter head moving left and right. The front hidden cutter head can only swing back and forth, and the flexibility increases the function of swinging left and right. They can be used interchangeably on the cutter head.
In addition, Shunzhi also has an electric function, which is the same as the super-parallel electric version. The electric function can effectively reduce the sticking rate and improve the comfort to some extent. After the old version of Yin Feng blade was put on Shunzhi blade, the astringency was obviously reduced, and it was not easy to get stuck in two. This means that the probability of cutting the blade due to the lateral movement of the knife will be greatly reduced, which is well received.
Shunzhi needs batteries, so the handle is much thicker than Super Shunzhi, and the grip is better. Generally speaking, there is no special need to buy super-slippery power, but now X East is cheaper than super-slippery power, so buy it directly.
The travel cutter head seat attached to Shunzhi is also good. My Super Shun may be the user version. The cutter head seat is plastic, which is not well fixed. However, this kind of plastic bracket has another advantage, that is, it can be attached to the side of the small cabinet above the bathroom sink and hung firmly.
5. Finally, the front is hidden for protection.
It was not until April this year that Gillette introduced front and rear guards ... >>
Question 7: How to use the manual Gillette razor? Scrape above, scrape below! ! !
Question 8: Gillette's front speed 3 exceeded 65438+February 2 1 How to use a manual razor?
Gillette shaving course
The razor blade is used up, and the bubbles are almost the same. I can't stand not shaving. So I made a special trip to Yichu Lotus on Saturday. When I arrived at the supermarket, I couldn't stand the enthusiastic introduction of the salesman. Of course, I also seriously considered it myself (usually influenced by other people's opinions in the store) and started to buy a set of three breakthroughs. A knife rest, two blades and a bottle of shaving lotion are all worth it. I used it twice, and it felt really good, much more comfortable than the previous double-layer blade.
Unique 3-layer progressive shaver, shaving forward and backward, effectively reducing * * *, it can sense the slight fluctuation of your facial skin and adjust the angle of the cutter head at any time. At the same time, the new and improved double lubricating strips, soft protective sensing fins and titanium anti-slip grip are added to the front speed 3 breakthrough, bringing you more intimate shaving enjoyment.
It's true. I used to be very careful about a small scar on my chin and often scratched it. Now I'm not afraid. Moreover, in the previous blade, every time a beard was left in the gap of the blade, which affected the effect. Now the design of the three-layer blade has been improved, and there is absolutely no such situation. In order to shave more comfortably, this investment is worthwhile.
Now learn the shaving trilogy with me and enjoy the perfect shaving process.
Before shaving
Thoroughly clean/soften the beard
Shave well in the morning, because the facial skin is relaxed at this time. Wash your face with warm water as much as possible, which can make pores and beards swell and soften and facilitate shaving. At the same time, cooperate with facial cleanser to thoroughly clean facial skin and oil to prevent dirt from invading the stratum corneum during shaving.
Rule of enjoyment: wet+shaving foam.
Moisture is the key to shaving. It will make your beard 70% softer than before, and it will be more conducive to shaving after the pores are relaxed. Greatly reduce the discomfort of the skin after shaving. Combined with shaving, its high-quality formula can effectively soften beard cutin, lubricate skin and provide better protection. Usage: Apply proper amount to face and skin until rich foam is produced.
When shaving
Scrape clean forward/backward.
Step 1: When shaving, start from the left and right upper cheeks and shave along the direction of beard growth. This can reduce the chance of beard ingrowth and make most of your face look like it did when shaving for the first time.
Step 2: Followed by the beard of the upper lip and the part under the nose, the skin under the nose can be leveled and shaved off.
Step 3: Check the edges and corners of the face, such as chin and Adam's apple.
The law of enjoyment: choose the right razor+the right method
After shaving
Rinse/moisturize the skin
Maintenance after shaving is equally important. Using aftershave products can effectively prevent bacteria from invading your skin and provide sufficient moisture.
Enjoy the rules: cleaning and maintenance
After shaving, wash the skin with cold water or warm water to make the pores shrink quickly, and then pat the aftershave water or aftershave water. Don't use too much force to avoid damaging the skin.
Question 9: How to care (clean) Gillette's third-hand shaver after use? You don't need any care. After washing, throw away the water and put it somewhere. Not that fragile.
Question 10: How to match the tool holder and cutter head of Gillette shaver? First, thank you for your support. Female Hayes Online has risen rapidly in the past month. Gillette razors and related products sell well because our service and product quality have always been the first. We don't make inferior products, we only make genuine products, and we only make the lowest price. We hope to sell more at a lower price, which will also benefit everyone. Ok, now let's talk about how to match the knife rest and knife head of Gillette razor, as I said just now. There are many series of Gillette razors, and not every series of products has a common tool holder and blade. For example, Gillette Weifeng's tool rest matches the blade. It is impossible for the blade of Gillette Su Feng 3 to be hard on Gillette Weifeng's tool rest. That's impossible. So pay attention to this when shaving and buying Gillette razors! After you decide which series of Gillette to use, please decide which series of blades and tool holders. For example, if you choose Gillette Strike 3, you can only buy Gillette Strike 3 blades in the future. Because, for example, the blade of Geely Weifeng can't fit the rest of Gillette Strike Speed 3. Please be sure to recognize this.
- Previous article:How to treat lung cancer?
- Next article:Good sentences about meeting someone you want to meet by chance.
- Related articles
- What are the inspirational birthday wishes for my son?
- Loneliness is a bad mood: Liquor is my best friend, loneliness is my truest confidant
- 202 1 heartbroken sentence talk about the mood book
- Wechat, where mom is sick, is about praying for her mother.
- Zhu's Letter Writing
- Why can¡¯t calendars be torn apart in advance?
- What are some sad sentences about tobacco and alcohol?
- Talking about not being able to see your loved ones during the Mid-Autumn Festival
- A particularly classic sentence to understand social reality.
- Don't give a complete sentence to anyone who gives candy.