Graphic method of ice fishing anchor hook

Small links to pay attention to when tying hooks

Hooking is a link that should be paid attention to in fishing. The quality of the hook knot directly affects your performance in the competition. In the one-on-one match, the master ruled out the factors such as fishing position and bait, and can make sure that the bait knows how to match in the final match. Then the comparison is the grasp of basic skills and small links, such as catching fast fish, tying the hook, standardizing the operation and choosing the right line. You don't have to change the secondary line at a time, but the hook is not fastened properly. As a result, the vice line is often changed, which delays the fishing time and pulls. Mixed culture fishing, the original 1 line can catch 3 to 4 kilograms of fish, because the line was pulled when the hook was tied, the pulling force was only half of the original, and 2 kilograms of fish cut the line, so it was too late to regret it!

Let's talk about some points that should be paid attention to in the process of tying the hook. Of course, my binding hook is not very good, it will be improved.

1。 According to the size and speed of the fish. Select the size of the folding hook, the length of the sub-line and the diameter of the line. Fish is fast-the number of hooks can be appropriately enlarged by 1 ~ 2, and the number of substrings can jump by 1.

When the weather is cold and the fish speed is slow, the hook can be appropriately reduced by 1 yard or one yard.

For example, we can choose 2 # or 3 # condoms, 0, for raw fish with 3 to 5 tails and 1 2 tails, and for fish with more than 100 tails. 3' s secondary line fishing.

The same fish, if only about 20 to 30, 1 # sleeve, 0. The sub-line of 15 is enough.

2。 After selecting the size of the hook, the diameter and length of the sub-wire, measure the length with the sub-wire board and cut it out. The cut sub-wires are not in a hurry to be hooked. Align one end of the wires and cut them carefully with scissors to make them all the same, effectively avoiding the gap of several millimeters between machine hooks. It is recommended to use serrated scissors. The thicker threads are cut together, which is easy to slide down. Of course, careful pruning after cutting can also be avoided. Otherwise, the tied hook has a gap of several millimeters, which makes it uncomfortable to look at and use!

3。 First, the bottom thread is clamped on the hooking device, leaving a thread end with a fixed length. Then clamp the hook in the groove of the hook fastening device, and then press the rotation button, and stop when it is fastened for 7 to 8 turns. It should be noted here that hooks below sleeve 4 usually need to be tied 7 to 8 times, while hooks above sleeve 4 only need to be tied 5 to 6 times. If you tie it too much, it won't tighten and it will come loose easily. After catching a big fish, it will turn behind the hook handle for a long time.

4。 After tying it for 8 times, pay attention to drawing the long line at a constant speed at this time to avoid pulling it to the end quickly. After pulling the hook handle, tighten it properly according to the size of the line, and be sure to pull it to the end. After the hook is taken off, it is not really tied. The short-term head set aside should be tightened, and the long-term line should also be under pressure. In the process of pulling, the short line sometimes breaks itself, but it doesn't matter. It should be noted that if the long line is not pulled to the end before, the short line will level the sub-line. Then this pair of wires will not be tied and it is not safe to use.

5。 After the hook is fastened, you need to pay attention to the hook distance. Many fishermen always think that they can catch two tails with a good hook distance. As a result, either the hook is too clever and there are too many empty rods, or the hook is too dull and there are too many fish. The reasonable hook distance is hook distance = 1.5 ~ 2 hook length (small hook below 4 # sets) = 1 ~ 1.5 hook length (large hook above 4 # sets). We usually use two pins and insert them on the foam board. Measure the hook distance vertically, put the hook on it, and tie the line.

Whether it is machine or hand-tied, it can be tied well. If it is a large number of hooks, it is recommended to use the hook fastening device! These are some small problems that need to be paid attention to when tying hooks. If there are any mistakes, please point them out.