What if the water pipe leaks? How to repair a leaking water pipe!

In life, we will encounter water pipes leaking and need to be repaired. However, this situation is also common in life. Common reasons are improper construction, material selection or installation methods. So, let's talk about water pipe leakage maintenance today. Classification and characteristics of water pipes? Knowing more relevant information can avoid this situation in life.

Water pipe leakage maintenance

1, maintenance of sewer leakage

If the sewer pipe leaks, see what material it is. If it is a PVC water pipe, you can buy a PVC water pipe and connect it yourself. You can cut the broken water pipe, first put the joint into one section of the pipe, so that the partition position of the other section is just flush with the other opening of the joint. Yes, you can straighten the water pipe and send it directly to this end, so that the two ends have a certain crossing distance (length) and then you can dismantle it.

Of course, you can also buy waterproof glue to repair the sewer pipe, wrap the leaking part with waterproof tape, and then wipe it with mortar waterproofing agent and cement. The water leakage is too serious, and it needs professional plumbing maintenance company to repair it.

2, iron pipe leakage maintenance

When the iron water pipe leaks, different methods should be taken according to different situations. The iron pipe with a diameter of 2 cm leaked water, but the iron pipe was not corroded, only some parts were damaged. Close the main valve of water pipe first, and then replace the damaged iron water pipe. Jack can cut the damaged water pipe, then thread it with threading equipment, and then connect the connector!

If the water leakage is caused by the corrosion of the whole water-saving pipe, it is necessary to replace the whole water-saving pipe and screw the two ends. The iron water pipe with a diameter of 20 cm leaks. If there is a problem with the connector, replace the connector. If the pipe body leaks, the embroidery of the original pipe body should be polished off. When welding and repairing, it is necessary to embed an iron plate closely attached to the water pipe for reinforcement.

Classification and characteristics of water pipes

1, galvanized pipe: This material may be the water pipe at home when the house is handed over. Not only can it not be buried in the dark, it is easy to leak, but it is also easy to corrode and lead to excessive heavy metals in the water. Basically, this kind of water pipe is replaced directly when changing water.

2. Copper pipe: Compared with the traditional good water pipe, it is corrosion resistant. If it is connected with ordinary pipe fittings for a long time, there will be leakage problems. If welding process is adopted, it will be much safer, but it is best not to bury it in the wall. The price of copper tube is very high. As a strategic reserve metal, copper is really wasted.

3. Aluminum-plastic pipe: It used to be popular and easy to construct, but it is easy to leak when it is used as a hot water pipe.

4.PPR pipe: at present, it is a perfect water pipe, non-toxic, corrosion-resistant, and seamlessly connected by hot melt. Can be used for hot and cold water pipes or buried underground.

About the maintenance of water pipe leakage, the relevant information about the classification and characteristics of water pipes is here. Because water pipes are concealed works, you must choose products with good quality when purchasing water pipes, and the installation must be standardized, otherwise the problem of water leakage will directly affect your future life. I hope the above introduction can help you.