How to make the foundation of light steel villa?

Light steel structure fittings can't be built directly in the soil, so light steel villas, like other houses, need to lay the foundation first, but light steel houses are light in weight, so the requirements for the foundation are not so high. There are four main laying methods of light steel villa foundation: strip foundation, plate foundation, independent foundation and wooden pile foundation. When laying the foundation, position and pay off first, then dig the foundation, lay red bricks, fix steel bars on the red bricks and pour concrete. After the concrete is dried, the foundation should be filled and compacted. Let's take a look at how the foundation of light steel villa is made. 1. Does the light steel structure house need to be laid?

As a new type of environmental protection building, light steel villa is welcomed by many rural self-built houses. However, because the popularity of light steel villas is not as high as that of traditional houses, many friends will have some questions about light steel villas, such as whether it is necessary to lay the foundation. Let's give you a brief talk:

The first step of building a traditional structure house is to lay a good foundation, which is the foundation of the house. Houses built on this weak foundation are prone to various quality and safety problems due to unstable foundation. As a new structural building, light steel villa can't be built directly in the soil during the construction process. After all, the firmness of the soil is not guaranteed, so we must lay a good foundation, so as to complete the construction of the house well.

Therefore, the light steel structure of the house also needs to lay the foundation, but because of the light weight of the light steel villa, the requirements for the foundation are not as high as those of the traditional house.

Second, there are several basic ways to play light steel villas.

Compared with the traditional building foundation, light steel villa has the advantages of short time consumption, low cost and no need to invest too much manpower, material resources and financial resources. Generally speaking, there are four kinds of foundation methods for light steel villas: strip foundation, plate foundation, independent foundation and wooden pile foundation.

When building a light steel villa, we should choose an appropriate foundation form according to different foundation conditions and different housing requirements, and adopt preloading method, deep mixing method, replacement method, sand pile method, high-pressure jet grouting method, heavy hammer compaction method, soil or lime soil compaction pile method, vibroflotation method and other methods to strengthen the foundation.

Third, how to do the foundation of light steel villa?

Light steel villa foundation uses less soil, which can effectively reduce the foundation cost and reduce the damage to land resources. The method of light steel villa foundation is as follows:

1, before digging the foundation, start positioning and setting out, choose a suitable position, and start digging the foundation, pouring cushion and curing.

2. Use the total station to locate and pay off again, and build red bricks.

3. Carry out the positioning and setting-out of the foundation pit for the third time. Fix the steel bar on the red brick, fix the steel bar on the formwork and pour concrete.

4. After the concrete is dried, dismantle the formwork and embed the waterway pipeline and circuit pipeline.

5, the foundation began to fill, artificial preliminary compaction, and then use walking rammer compaction again.

6. After the filled soil is compacted, the moistureproof layer is laid, and the indoor ground is poured with concrete. When the concrete is dry and the construction is basically completed, the light steel keel can be installed.