How about Wuyang Honda Phantom 150? Tell me about its advantages and disadvantages!

Advantages and disadvantages of Wuyang Honda Phantom 150;

Advantages:

1, Phantom is equipped with Wuyang-Honda i-FI high-efficiency EFI system, with a maximum power output of 8.9kW/7500r/min and a minimum fuel consumption of only 2.22 liters per 100 kilometers.

2, the use of LED headlights plus daytime running lights, full LCD instruments, LED taillights design is more fashionable and avant-garde.

3. In terms of comfort, the height of the whole vehicle conforms to the ergonomic structure, fully considering the saddle height of 773mm and the ground clearance of 159mm in the golden three-point sitting position. The design and configuration of central shock absorber, 17 inch wide tire, disc brake and ENG balance shaft make travel safer and more comfortable.

Disadvantages:

1, the carburetor cavity is too short, that is, the cavity wall surrounding the vacuum membrane plunger is not high enough, the machining accuracy is not enough, and the inner wall aperture is too large, resulting in a large fit clearance. When the plunger moves up and down, the suction of the engine makes the plunger move to the engine side under the pulling force generated back and forth, thus wearing the side close to the engine.

2. The left side of the front wheel is a dust seal ring. When working, the outer ring of the sealing ring rubs against the hub, while the inner rings of other oil seals contact with the moving parts. The inner ring of the oil seal is contracted by the spring and can continue to seal after wear. However, the outer ring of the dust-proof sealing ring of Phantom has a gap after wear, and there is no spring fastening, which leads to water inflow.

Wuyang-Honda Motorcycle (Guangzhou) Co., Ltd. is a Sino-Japanese joint venture jointly invested by Guangzhou Automobile Group Co., Ltd., Honda Technology Industry Co., Ltd. and Honda Technology Industry (China) Investment Co., Ltd., which was established in 1992, with a contract term of 30 years and a registered capital of 30 million US dollars, with 50% shares held by both China and Japan. The company integrates R&D, manufacturing and sales, and is one of the largest motorcycle manufacturers in China. At present, the company's factory covers an area of 320,000 square meters, with a building area of/kloc-0.08 million square meters and a production capacity of over/kloc-0.00 million vehicles.

(Source: Baidu Encyclopedia-Wuyang Honda)