What are the installation methods and precautions of toilet water pipes?

Installation method of toilet sewer pipe 1. Before installing the sewer pipe in the bathroom, check whether the decoration building materials, water pipes and related connecting fittings are damaged or cracked. 2, in the bathroom sewer installation, the builder should consider the thickness of the wall brick in advance. 3. Use connectors as little as possible under the wall and the ground to reduce the hidden danger of leakage and ensure that the connectors are firmly installed without leakage. 4. When installing the sewer pipe in the bathroom, we should consider the installation position of the faucet of the washing machine at home and the layout of the sewer pipe. , but also pay attention to whether the location of the power socket is appropriate. Precautions for installing sewer pipes in the bathroom (1) The water pipes in the bathroom basically pass through the roof, because this can reduce the probability of man-made damage, and the interface and outlet of hot and cold pipes must be parallel, usually the hot pipe is on the left and the cold pipe is on the right. In the design of Shangqiu Decoration Company, the whole pipeline should be as far away from the circuit as possible, the position and slope of the pipe clamp should meet the requirements, and each valve should be installed smoothly to facilitate future use and maintenance. (2) When installing the hot water pipe, pay attention to distinguish between the water inlet and the water outlet of the water heater. The water inlet is connected to the main valve, and the water outlet is connected to the bathroom through the pipe. After the installation, open the valve to determine whether there is water leakage, and then install the faucet and shower in the bathroom. (3) The bathroom is the darkest place in the whole family, and it is easy to accumulate moisture. Therefore, ventilation is particularly critical. It would be best if the bathroom could be designed with a window. Without this condition, in order to prevent mildew and tide insects from appearing in the bathroom, in addition to installing exhaust fans, it is also necessary to avoid the phenomenon of "wrapping". Many people like to wrap the bathroom pipes tightly, which just leads to the moisture being wrapped in the pipes and not getting out.