What are the technological processes of argon arc welding of cables?

Usually, cable companies have special argon arc welding production lines, and the most important department is argon arc welding master, whose control is directly related to the welding quality of copper pipes. A good argon arc welding master also needs professional training and years of experience, so how to become a good argon arc welding master?

In order to ensure that the copper strip passes through the die smoothly, this step requires manual installation of the main machine, which is the first working procedure before welding. The flat copper strip needs to be rolled into copper tubes with a mold, and the gaps between copper tubes also have certain requirements, and they should not be spread too much, let alone stacked together. If it is too spread out, it will not be penetrated at all, but will be penetrated again. So if you want to do this well, you must practice more.

Capillary should be polished well, and a polished capillary can be welded until the end of labor, while a capillary without polishing needs not only polishing by the teacher, but also simple spot welding, missing welding or even no welding at all. When grinding the capillary tube, the handle needs to be polished by itself.

Look carefully. In the process of welding, once the welding line has been debugged and made, it is necessary to carefully observe the labor pattern in the display to see whether the solder joints of the capillary are normal, and then observe whether the finished weld is flat and whether there are some missing welds. Usually, large crack welding starts with small leakage. Argon arc welding of cables is a very important process. To be a good master of cable argon arc welding, we should not only do the above three points well, but also practice more general experience to reach the peak of our skills.