What is the size of the business card?

Question 1: What is the normal business card size? First, the manuscript part:

1, standard size of business card: 90mmX54mm 90mmX50mm 90mmX45mm. But there is bleeding, up and down 2 mm, or so, so

Manufacturing dimensions must be set to: 94 x 58 mm 94 mm x 54 mm 94 mm x 48 mm.

2. If the size of your finished product exceeds the size of a business card, please indicate the correct size you want.

The upper, lower, left and right sides also bleed 2 mm each.

3. The color mode should be CMYK. Image files above 350dpi

After the manuscript is finished, there is no need to draw cross lines and cut lines.

Second, the text (digital) part:

1, the layout of the copy should be more than 3mm away from the cutting line to avoid the text being cut off when cutting.

2. After the manuscript is confirmed, the text should be converted into curves or outlines, so as not to be found when outputting.

Font not found and garbled.

3. Please don't set the use of system characters when entering text, because this will lead to white at the intersection of strokes.

Color node. At the same time, please do not set the text as an overlay fill. pot

Third, the color part:

1. The printing color of the finished product cannot be required by the screen or printing color, and the document must be in accordance with.

According to the percentage of CMYK color ticket, determine the color fill.

2. When the same drawing file is printed at different times, there will be some differences in color, and the color difference will be up and down.

Within 10% is normal.

3. The color of shading or base map should not be less than 5%, so as not to be rendered when printing the finished product.

4. Images and photos are made in CMYK mode and saved in TIFF file format instead of PSD format.

File format input. If you use CoreIDRAW to design a business card, please enter all the inputs.

POWERCLIP's images, objects, separated shadows and transparency of use.

Or fill the color with the filter material and flip the bitmap again. Color is set to CMYK32-bit, and the solution is

The resolution is 350dpi. Check the color profile of the transparent background for anti-aliasing compensation to avoid it.

Sometimes it is necessary to rotate the imposition output to create Massek images. For example, by adjusting the nodes.

Small bitmap, please flip the bitmap again to avoid being partially covered when outputting.

Fourth, the drawing part:

1. For all graphics such as input or self-drawn line color blocks, the border thickness cannot be small.

0. 1mm, otherwise the printed product will be broken or cannot be presented.

2. If the wireframe is set to "zoom with image", please check the manuscript carefully after completion, otherwise.

I'm afraid irregular wireframes will be formed when printing.

3. When the gradient object is placed in the drawing frame for precise clipping, please convert it into a bitmap, because the object is placed in the drawing frame.

If the border of is rotated after being grouped with other objects, its gradient direction will not rotate together.

4. You can't set the "Edge Width" for any gradient object, because the interpretation of the output machine is different.

Sometimes, it will lead to insufficient color filling at the edge of the gradient.

Verb (abbreviation for verb) Other parts:

1, the most commonly used price is 250g matt paper. Commonly used optional paper includes 200g, 250g and other special art paper printing.

3. Double-sided and double-folded business cards, indicating broken lines and front and back, with the same special size.

After completing the above precautions, you must make a final check in CorelDRAW file options.

Click Text Information to display all the data of the drawing file. If all the text is flipped,

Line, text statistics will be displayed: there are no text objects in this document. Bitmap object

Should be CMYK-32 bits, whether the color filling and outline are completely in CMYK color mode, outside

Whether the box is still set to "scale with image" and so on. ...& gt& gt

Question 2: What kinds of business cards are there and what is their general size? There are many kinds of business cards. Do you mean the design style or the material of the business card? The design style of business cards is based on your own personal information, company information, and materials, depending on which material you think is good. There are business cards made of ordinary coated paper, advanced specialty paper, PVC, pearl paper and other materials. For example, the network business cards of printing assistants adopt the domestic standard business card design size, that is, 92×56mm (including 65,438 cards on each side) and 90mm× 108mm, 90mm×50mm and 90 mm×/kloc-.

Question 3: What is the size of the business card? The standard size of a business card: 90mmX54mm 90mmX50mm 90mmX45mm, which is commonly used in China. However, the content and format of business cards are also important. Please pay attention, or you will be laughed at when you go out.

Question 4: What should be the design size of a business card? The standard size of a business card: 90mmX54mm 90mmX50mm 90mmX45mm, which is generally used in China now, but the content and format of the business card are also very important, so you must pay attention to it, or you will make a joke when you go out.

Question 5: What are the dimensions, length and width of business cards? Hello, glad to help you,

The dimensions of business cards are generally 9X5.4cm, 9X5cm and 9X4.5cm I hope it will help you, and manufacturers sincerely advertise.

I hope the answer from the clever wife's housekeeping can help you!

Question 6: What is the size of the business card? Generally speaking, I know I designed it.

Horizontal version: 90 * 55mm 85 * 54mm

Vertical version: 50*90mm 54*85mm

Square version: 90*90mm 90*95mm

Question 7: What is the size of the business card? Manuscript part:

1, standard size of business card: 90mmX54mm 90mmX50mm 90mmX45mm.

However, the production size must be set to:

94 x 58mm 94 mm x54 mm 94 mm x48 mm.

2. If the size of your finished product exceeds the size of a business card, please indicate the correct size you want, and there is 2mm bleeding on the top, bottom, left and right.

3. The color mode should be CMYK. Image files above 350dpi

After the manuscript is finished, there is no need to draw cross lines and cut lines.

Second, the text (digital) part:

1, the layout of the copy should be more than 3mm away from the cutting line to avoid the text being cut off when cutting.

2. After the manuscript is confirmed, the text should be converted into curves or outlines, so as not to be found when outputting.

Font not found and garbled.

3. Please don't set the use of system characters when entering text, because this will lead to white at the intersection of strokes.

Color node. At the same time, please do not set the text as an overlay fill.

Third, the color part:

1. The printing color of the finished product cannot be required by the screen or printing color, and the document must be in accordance with.

According to the percentage of CMYK color ticket, determine the color fill.

2. When the same drawing file is printed at different times, there will be some differences in color, and the color difference will be up and down.

Within 10% is normal.

3. The color of shading or base map shall not be less than 5%, so as to avoid being rendered when printing the finished product.

4. Images and photos are made in CMYK mode and saved in TIFF file format instead of PSD format.

File format input. If you use CoreIDRAW to design a business card, please enter all the inputs.

POWERCLIP's images, objects, separated shadows and transparency of use.

Or fill the color with the filter material and flip the bitmap again. Color is set to CMYK32-bit, and the solution is

The resolution is 350dpi. Check the color profile of the transparent background for anti-aliasing compensation to avoid it.

Sometimes it is necessary to rotate the imposition output to create Massek images. For example, by adjusting the nodes.

Small bitmap, please flip the bitmap again to avoid being partially covered when outputting.

Fourth, the drawing part:

1. For all graphics such as input or self-drawn line color blocks, the border thickness cannot be small.

At 0. 1mm, the printed product will be broken or cannot be presented.

2. If the wireframe is set to "zoom with image", please check the manuscript carefully after completion, otherwise.

I'm afraid irregular wireframes will be formed when printing.

3. When the gradient object is placed in the drawing frame for precise clipping, please convert it into a bitmap, because the object is placed in the drawing frame.

If the border of is rotated after being grouped with other objects, its gradient direction will not rotate together.

4. You can't set the "Edge Width" for any gradient object, because the interpretation of the output machine is different.

Sometimes, it will lead to insufficient color filling at the edge of the gradient.

Verb (abbreviation for verb) Other parts:

1, the most commonly used price is 250g matt paper. Commonly used optional paper includes 200g, 250g and other special art paper printing.

3. Double-sided and double-folded business cards, indicating broken lines and front and back, with the same special size.

After completing the above precautions, you must make a final check in CorelDRAW file options.

Click Text Information to display all the data of the drawing file. If all the text is flipped,

Line, text statistics will be displayed: there are no text objects in this document. Bitmap object

Should be CMYK-32 bits, whether the color fill and border are completely in CMYK color mode, and whether the border is still set to "scale with image".

Question 8: How many sizes of business cards are there? What are the common sizes? The normal size of a business card is: 90×54 mm.

It is also very popular to make a narrow version: 90X50mm or 90 x 45 mm

Some customers will make it smaller for convenience: 80 * 50 mm.

Question 9: What is the size of the business card? 90x50mm, American card holder, bleeding 92x52. 90 54mm each, Chinese business card standard size, bleeding 92x56.

Most people like to use bold, and the font size is not specified, and it cannot be less than the eighth character. It is advisable to read it clearly, according to your typesetting design.

Generally, the most common is 300g coated paper, which can be coated with light/dumb film. There are all kinds of plates. Please refer to me.