What is a car trouble light?

The icon of the car fault indicator light of Pacific Auto Network is to remind a certain part of the car of a fault. The icon of the car fault light is basically red. The icon lights up, indicating that the corresponding function of the vehicle has failed, and the owner needs to stop for maintenance in time.

"There is a light on the dashboard of my car, which is an icon of a man with a sword."

If you are not familiar with what these icons represent, you will not only make a joke, but also cause irreversible damage to the vehicle. Automobile fault lights: explain some basic conditions of the vehicle and indicate the current working state of the vehicle. (e.g. light system indicator, water temperature indicator, oil quantity indicator) Prompt category: indicates that the current state of the vehicle is abnormal or the operation is incorrect. Warning category (such as seat belt warning light and door opening warning light): indicates that the vehicle is out of order and needs maintenance. (e.g. engine fault light, oil light) The color of the light means green; the function indicator light plays a prompting role (e.g. reversing radar, cruise system, power mode switch, shift indicator light, etc.). ) Yellow: Fault warning light and function indicator light play a warning role (such as ABS light, engine fault light, traction control indicator light, etc.). ) Red: Fault warning light plays a serious warning role (such as oil light and seat belt indicator light). Battery indicator light, etc. ) The most dangerous 10 car fault light. When these lights are on, you must pay attention to them, which is very dangerous. 0 1 oil alarm lamp oil pressure fault lamp is used to display the stock and pressure of oil in the engine, and the color is mainly red or yellow. If the indicator light is on all the time, it may be that the oil quantity and pressure are lower than the standard value, please replenish the oil immediately.

Water temperature warning light Water temperature warning light is used to display the temperature of coolant in vehicle engine, and the color is mainly yellow. If the liquid level is low, the owner can add coolant or pure water for emergency. If left untreated, continuous driving will lead to excessive engine temperature, resulting in deformation of the cylinder block, "cylinder sticking" and "cylinder gasket".

Engine fault light Engine fault light is used to display the working state of the engine, and the color is mainly yellow. If this light stays on after starting the car, there may be something wrong with the engine system.

Brake system fault If the brake system fault light is on, please make sure that the handbrake is completely released first. If the handbrake is still there when it is released, please check whether the brake oil level is normal or whether the brake pads are too thin.

The warning light of steering assist indicates that the steering assist system is out of order, and the assist may suddenly disappear or be intermittent at any time during driving, which is very dangerous. This kind of fault can't be checked or repaired by itself, so it needs to be repaired at a professional maintenance station.

The door and front cover are not closed, and the warning light is on. Please check whether the door/front cover/trunk is closed immediately.

Tire pressure warning light This indicator light is used to display the tire pressure of vehicle tires, and the color is mainly yellow. Under normal circumstances, the indicator light is off. When it is opened, the tire pressure may be insufficient or damaged. If you continue to drive, there is a danger of puncture at any time, and you need to repair or replace the spare tire as soon as possible.

Battery alarm lamp Battery status indicator lamp is used to display the working status of automobile battery, and its color is usually red or yellow. If the indicator light stays on after the car starts, it is reminding you that there is something wrong with the battery and it is time to check or replace it.

ABS indicator lamp ABS (Anti-lock Brake System) fault lamp is used to display the working state of vehicle ABS system, and the color is mainly yellow.

(Photo/Text/Photo: Pacific Auto Network Q&A called Beast)