Reflection and summary of power safety accidents

Improving the executive power of power safety management and effectively managing power safety are not only the guarantee of enterprises, but also the guarantee of power users. Below, I have compiled a reflection summary of power safety accidents for everyone. Welcome to refer to.

Reflection and Summary of Electric Power Safety Accidents (I)

On the day of _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

After investigation, the work of the accident itself is very simple, that is, to pre-test the switches, ct and line coupling capacitors at interval 226 of 66kv tower line. However, our staff did not strictly abide by the relevant provisions of the safety regulations, which led to the accident. Then, we talk about "safety first, prevention first" every day, and hold the "safety regulations" exam every year. Why did such a serious accident happen? I think there are two main reasons: first, safety management is a mere formality, and some staff members have a poor sense of safety responsibility, which often leads to the phenomenon of "not being on duty"; Second, the safety technical training is not in place, and some staff members have no real safety awareness and lack self-protection awareness.

The nature of the accident is bad, the consequences are serious, and the lesson is painful! In _ _ _ _ Electric Power Bureau, when there was no accident of personal electric shock casualties for more than 20 years, when the safety awareness of many managers and staff gradually faded, this accident undoubtedly gave us a blow! This stick woke us up: "Ah, the danger is around us!" " Mr. Wang said: There is a problem in our work, that is, the awareness of safety is weak-"accidents don't count unless they happen in our unit, and major accidents don't count!" I think Mr. Wang is right and practical.

As the saying goes, "It's not too late to mend." In my opinion, this sentence is not suitable for our electric power department! We don't want to "make up for it", but "prepare for a rainy day"! Nip in the bud and nip all unsafe factors in the bud!

Because this accident happened to a new person in the inspection class, and I am also a novice who has just stepped into the inspection work, I feel extremely sad and sorry for this accident! If I want to talk about my feelings about the cause of this accident from the perspective of a newcomer to the inspection, and recall my previous work, plus this accident, I think there are two misunderstandings in our work: First, as a newcomer who has just joined the work, I still don't understand a lot of knowledge, but sometimes I am embarrassed to ask the old worker master because of my face. Second, on the other hand, because they have just joined the work, all parties are eager to show themselves and get everyone's recognition, but they are afraid of being accused, thinking that they are joking and being looked down upon by others. So no matter what work, as long as it is assigned by the masters, we will work hard and try our best to finish it as quickly as possible. Sometimes, I don't even wait for others to speak or say hello. I think only in this way can I show my positive work and vision.

In the face of painful accident lessons, I deeply realized how important it is for a new worker to be down-to-earth and diligent! In the work, we should actively carry forward the spirit of Confucius' "not ashamed to ask questions" and "three people must have a teacher" and be diligent in learning and consulting all aspects of working knowledge; Moreover, before taking part in some work, you should actively communicate with the master, especially when working on high-voltage equipment, you should ask the live parts and personally check whether the switch and breaker are in the open state. Remember that "face is small, work is big!" ""low speed, high completion! " "Anyway, safety first! " .

Through careful reflection on the accident, combined with the usual work, from the perspective of a newcomer, I have some immature suggestions:

First, because everyone has their own way of working, in order to adapt to the inspection work better and faster, can we arrange a relatively fixed partner for the newcomers who have just joined the work? In this way, newcomers can adapt to the working style of this fixed partner as soon as possible, and avoid misunderstanding and mutual distrust in information transmission and acceptance caused by unfamiliarity at work. Old masters take young apprentices, and this "one-on-one" working mode can also enable old masters to impart their work experience to newcomers better and more completely.

Second, can we find some teachers to train us regularly, so that we can have a more systematic and scientific understanding of the inspection work. In particular, give lectures on safety knowledge to new employees, increase safety knowledge and strengthen self-protection awareness.

Third, go to other places with good working methods and work experience from time to time to learn from each other. "Develop and strengthen yourself through continuous communication and learning.

Fourth, consolidate and improve our standardized operations and coordinate mutually beneficial cooperation between operation and maintenance. "Without rules, there would be no Fiona Fang." Only by doing a good job seriously can we ensure that the work is foolproof.

Experience 4: Experience of power accident cases

The electric power industry is a dangerous job, but as long as we master the law of electric power operation, always keep the vigilance of safe production, prevent delays and take every task seriously, we can completely tame the "electric tiger". The "Safety Regulations" and safety production guarantee measures in our hands are layers of cages and shackles designed for this vicious "electric tiger". This accident is precisely because the people involved in the work are careless about the tamed electric tiger, thinking that the electric tiger who has been arrogant for many years has really become a "sick cat". The danger of power system operation and maintenance is simply ignored, which is tantamount to opening the cage and shackles of "electric tiger" without authorization. This vicious "electric tiger" certainly won't miss any chance to show off.

Through research, I mainly have the following points:

1, safe production is not a slogan.

Safety in production is an epigram that we electric workers can hear or see all the time. But this is not only a slogan, but also the first criterion of our work and the only measure to ensure our personal safety. We can't ignore the danger of the future because of the previous safety. Forgetting this rule is to send yourself into the cage of an "electric tiger" with ingredients.

2, obey the command, obey the scheduling

Without all kinds of safety measures, the danger of electric power work is far greater than war. Because not everyone will die in the war, and if there is no guarantee of safety production measures in power production, no one can escape the clutches of the "electric tiger". Without strategic planning and flexible command and coordination of all arms and units, the war will fail. The same is true for electric power work. If there is no safety production measures as a weapon, if there is no strict command, it is very likely to cause self-injury, accidental injury, and even mass casualties, and at the same time cause immeasurable economic losses. No less than losing a war. Therefore, electric power work should be as disciplined and well-directed as the army.

3. The laws are not complied with and the law enforcement is lax.

With the promulgation of the Law on Safety in Production, safety in production has risen to the height of law. Yes, if you don't abide by the safety production guidelines personally, the consequences may be harm to others. This is "homicide"! It may also cause national economic losses, which is the crime of endangering national security! Even if there are no serious consequences, you have committed the crime of dereliction of duty. If the safety measures in our work, such as "two votes and three systems", are not strictly observed by the staff, but go through the formalities, that is, "the law is not complied with and the law enforcement is not strict." It is a threat to personal safety and state property, and it is a crime. In the "Bengbu 5. 12" accident, the working ticket was "signed" and "unsigned", and the system of work interruption and signature handover was not strictly implemented, that is, the compliance with the safety production guarantee system was not raised to the level of legal compliance.

In the future, I will be strict with myself, earnestly abide by various safety guarantee systems, perform the duties of safety production, earnestly abide by the safety guarantee measures such as "two votes and three systems", and never be careless. For the happiness of my family and the prosperity of my career, I will cherish the precious lives of myself and others.

Reflection and summary of power safety accidents (II)

20 12 1 12. On February 8th, Lu Fang Center Power Supply Company of Jinxi County took the opportunity of Safety Day to actively learn accident cases. Our hospital attaches great importance to the study of every accident case, and all staff actively participate in it, carefully study every accident around us and analyze the various reasons for the accident.

First of all, everyone thinks that we should attach great importance to safety ideologically, treat everything well, and do everything with our heart. "The word' serious' is the most frightening word in the world. As long as you are serious, there will be no bad things in the world, and there will be no such accidents. As long as you take responsibility for everything, correct your attitude, be strict with yourself everywhere, always be alert to yourself in your daily work, have no careless thoughts, and be willing to believe that everything can be done well.

Secondly, as our power production work, safety is the top priority of all work. Therefore, we must strictly abide by the rules and regulations and operating procedures, and we must not violate the operating procedures because we are familiar with them and have not done anything before. This year's "1.5" personal accident and "1.28" illegal operation are obvious examples. We will definitely take their bloody lessons as lessons for future work and carefully analyze the direct and indirect causes of their accidents. Strengthen the safety management of our company, and put an end to illegal management and illegal behavior accidents.

Third, on-site operation must be supervised by special personnel. The person in charge of the work shall take full responsibility and operate according to the safety measures indicated on the working ticket. We can't be like them, because we are afraid of trouble, we don't do work tickets, we don't check electricity, and we don't hang ground wires. Because I relax myself, even the grounding wires will be hung in the wrong order. I must follow the electric power safety operation rules and do a good job in large-scale construction and small-scale emergency repair and maintenance. In particular, our usual elimination of defects cannot be taken lightly.

Fourth, conduct regular safety training, arm the brain with knowledge, integrate theory with practice, and let everyone know the use and operation of safety tools and instruments. Don't go to the real field, one is the first two, and you don't understand anything when you use it.

In short, learning accident cases is by no means an armchair strategist, nor is it formalism. Instead, we should keep the lessons of others in mind and always spur our daily behavior. Get into the good habit of touching your head at the construction site and see if you are wearing all the safety tools under your feet. Let the word "safety" always be deeply stationed in everyone's heart. Do every job carefully, come to work happily and go home safely.

Reflection and Summary of Electric Power Safety Accidents (3)

The word "safety is no small matter" that reminds us was vividly reflected on the day of 65438+February 4. Whether it is an operator, a maintenance worker or a grass-roots manager, we should start from the overall situation and start from the details. The more subtle the place, the more attention should be paid. As the saying goes: a levee of a thousand miles, collapsed in the ant nest. We should not let our guard down just because "this is a trivial matter", which also requires us to treat it with a serious and responsible attitude and handle it with a rigorous and meticulous work style. Only in this way can the work be foolproof and ensure safety. In view of the accident on February 4, 65438, the following experiences are summarized:

1. Work must strictly abide by various rules and regulations and follow the process.

Since the provincial company entered Xingli, it has brought new management forms and concepts to Xingli. However, some of our employees did not follow up in time, did not clear their minds and change their concepts, and still took it for granted, irresponsible and arbitrary. Ignoring safety regulations and various rules and regulations is the root cause of the accident. Institutions are like laws. After making it, we are required to abide by it. Process is the process of our work, which should be equal to the system and require us to strictly abide by it. If we don't follow the rules and procedures, there will be mistakes, which will eventually lead to accidents.

2. Strengthen self-study and improve skills.

In order to avoid the recurrence of safety accidents, we must analyze and summarize the 12.4 accident, draw lessons and sum up experience. First of all, we should strengthen our own study of safety laws and regulations, strictly implement the requirements of various rules and regulations in our work, and never cross the line. Such as the typical "two votes and three systems" and "six requirements and twelve steps". The study of rules and regulations can't be a mere formality, and it can't be cursory; It is necessary to combine our work practice, organize discussions with each other while studying, and make clear the rules and regulations that are easy to commit in our work, so as to pay more attention to it in future work, standardize work style and behavior, and ensure personal and equipment safety. Secondly, we should strengthen the training and learning of business skills. 12.4 the accident shows that our own skill level is poor and our operation ability is weak. We must strengthen training and study in our future work. Training should start from two aspects: one is the training of one's comprehensive quality, and the other is the training of compulsory skills. The cultivation of our comprehensive quality depends more on our own conscious study, reading more books, understanding all kinds of cultural knowledge and improving our comprehensive cultivation; The training of business skills requires not only the enrichment of theoretical knowledge, but also the training of practical skills, both of which require us to actively learn. Seeing more, asking more questions and practicing more are the necessary means and ways to improve our operation skills (but the practice must be carried out under the premise of being supervised and ensuring safety). We must be familiar with the branch wiring mode and have a necessary understanding of the system wiring. Only when business skills are improved can we make overall arrangements when dealing with accidents, check the key points of faulty equipment, find the root cause of the fault in time, prescribe the right medicine and avoid the expansion of the accident.

3. Long-term investigation of potential safety hazards.

Combined with my own work characteristics, as a safety supervisor, in order to prevent all kinds of safety accidents in the future, we should first strengthen safety education, publicity and training, enhance the safety awareness of all staff, improve the safety skill level of all staff, and strengthen the ability to investigate hidden dangers of equipment; Second, we must strengthen the investigation of hidden dangers. Organize regular spot checks with the leaders of various departments on the safety skill level of personnel in each position, report the safety production situation to the leaders in time, take measures to organize rectification and check the rectification effect, so as to achieve the purpose of safety production. The investigation of hidden dangers should adhere to the principles of prevention first, combination of prevention and control, early detection and early treatment. For those who fail to rectify in time, it is required to explain the reasons, make records and rectify within a time limit. Fundamentally ensure the safety of personnel, equipment and property.

4. Strengthen the interest of accident drills and fault information.

First, it is necessary to strengthen the team's study, discussion and drills on typical accidents. The drill must be carried out, not on paper, and necessary practical operations should be carried out when conditions permit. The second is the information sharing of accidents and abnormal phenomena. Team leaders should strengthen communication and study, and enjoy all kinds of resources and information. Accidents have the characteristics of contingency and inevitability. Accidents and equipment failures encountered by each team are different, which requires us to communicate and discuss the phenomena and treatment processes of various accidents in order to achieve the purpose of information sharing and information improvement.

5. Safety inspection cannot be "simple inspection" and "stop at once"

Enterprises must ensure safety in production, and safety can promote production. Just like several big characters in the workshop: efficiency is the foundation of establishing a factory, and safety is the source of efficiency. 12.4 the accident made me re-examine my work: safety inspection is not a "simple inspection" and safety inspection cannot be "point-to-point". This is not only a requirement for operation and maintenance personnel, but also a requirement for safety personnel. Operation and maintenance personnel must conduct a detailed and comprehensive inspection of the management of the equipment in charge according to their own responsibilities, and "see, smell, listen and touch" according to the operation status of the equipment. Safety supervision personnel also have to "stop" and "dilute" personnel violations, hidden dangers and problems of equipment and facilities. "Simple investigation" and "point to stop" will make many problems missed, bury hidden dangers and leave a time bomb, which will lead to accidents.

Play your role well.

As the saying goes, just find your own seat. The roles of each team and each post in their daily work are not clear to varying degrees. What the squad leader should do and what the personnel on duty should do, especially in the handling of accidents, should be made clear. 12.4 after the accident, as the safety supervisor of the branch, I also have an unshirkable responsibility. I used to take part in all kinds of practical work, which led me to fail to perform my duties as a supervisor and guardian. It is also a disregard for one's job responsibilities and irresponsible for the safety of other staff on site. In the future work, I will be strict with myself, try my best to play my role and do all the work of the security officer dutifully; Learn from the bad face Bao Gong, use the "three irons" to crack down on "three violations", and find that we should educate and deal with them together. In addition, it is necessary to strengthen communication with team safety officers to ensure the management constraints of daily behaviors, so that everyone can consciously abide by various safety rules and regulations, and truly "bid farewell to violations and ensure safety" so that safety work can receive good results!

12.4 The accident taught the Samsung team a profound and unforgettable lesson, but the Samsung team is a United and cooperative team, which is harmonious, enterprising, mutual assistance and improvement. We will not be depressed because of this, but will go to a new starting point and meet new glory with a rigorous and realistic working attitude, full enthusiasm and high fighting spirit!

Reflection and summary of articles related to power safety accidents;

★ Reflection summary of power plant safety accidents

★ Reflection and summary of power safety production accidents

★ Model essay on reflection on safety accidents in power plants

★ Thoughts on safety accidents in electric power enterprises

★ Thoughts caused by power safety accidents

★ 5 essays on power safety production experience.

★ Examples of learning experience in power safety accidents

★ Reflection on power plant accidents

★ Great reflection on power plant safety

★ Review of power safety accidents