How to install children's coasting balance car: schematic diagram, method and video

I bought a children's sliding balance car for my children from the Internet. Parents need to follow suit and don't know how to install it. You can look at the schematic diagram of how to install the children's sliding balance car first. If there is an installation video, you can install it step by step, which is faster.

After receiving the children's sliding balance car, take out all the accessories, and check whether the accessories are complete according to the instructions. If the accessories are not complete, contact the merchant immediately to replace them. Generally speaking, it includes the whole car, handlebars, spare columns, manuals, tools, etc. of children's sliding balance car. Parents only need to install the remaining 10% accessories.

First install the upper limit stop ring, turn the car upside down, find the position of the upper limit stop ring according to the instructions, and tighten it directly with tools; Take off the black rubber cover on the car, unscrew the screw under the black rubber cover with a hexagon socket, take off the paper tube and install the handlebar. The handlebar is sleeved on the front fork post, and the screws on it are tightened. After screwing, put the Shanghai cotton pad.

Remove the transport stability protection paper. Don't pull it out directly, but take it off by rotating it. It also has a black nut case, remember to keep it. In the future, children will exercise at home. If wooden floors are installed at home, they can protect the wooden floors. If you don't have a wooden floor at home, you can take off the black nut protective cover. However, the installation method of each brand balance car may be somewhat different, and it should be carried out according to the instructions.