Example of reverse warehousing skills: subject 2

The skills of reversing into the warehouse in subject 2 are as follows:

1, speed control: control the speed in a steady and slow state (slow and steady when releasing the clutch to avoid sudden lifting and constant pressure lifting).

2. Is the direction technology correct: the steering wheel technology should be correct, otherwise you will not be able to grasp the direction of the car. I don't know how much the steering wheel has retreated or has returned to the right. The success of the whole pile penetration process depends entirely on the control of direction and speed.

3. If the angle between the wheel and the garage is less than 30cm, you can turn the steering wheel slightly to the left for half a turn, keeping a distance of about 30cm, pay attention to the rearview mirror, turn the steering wheel back quickly when the car body is parallel to the garage sideline, observe the left rearview mirror, and stop when the lower edge of the rearview mirror coincides with the horizontal line of the garage.

Precautions for reversing into the warehouse:

1, usually 1. Go, don't put it in the wrong gear.

2. Don't turn the steering wheel in the wrong direction: turn the steering wheel with your right hand when sticking to the library, and turn the steering wheel with your left hand when reversing.

3, slowly lift the clutch, don't turn off the fire, take your time and don't be afraid of jokes.

In the case of controlling the speed, the steering wheel is always as fast as possible. When the two conflict, control the speed first.

5. When stopping unexpectedly, slowly lift the clutch, otherwise it will stall. If it's off, put it back in neutral and then put it in gear.

6. Never look at the wrong pole. And prevent the car from hitting the telephone pole.

7. When you hit the steering wheel, don't count the wrong laps.