Five articles on safety evaluation of chemical plants

In order to improve the professional level of safety personnel, the factory trade union and the safety department jointly carry out labor competition activities for safety personnel, comprehensively assess the daily work of safety personnel every month, and assess the post responsibilities of safety personnel, and commend the advanced workers at the end of the year. The following is the safety evaluation of five chemical plants that I have compiled for you. I hope you like it!

Safety evaluation of chemical plant 1

The busy 20__ year is coming to an end, and the 20__ year full of expectations is coming quietly. In the past year, I still carried out all the work with an extremely serious and responsible attitude. I am serious and diligent, with gains and losses, achievements and shortcomings.

20__ years of work.

(1) Pay close attention to safety and environmental protection.

1, able to personally implement various safety protection measures and enhance personal safety awareness.

Since the safety accident happened in my workshop last year, it has been a great blow to me personally and made me realize the shortcomings in my work. This year, I asked myself to pay special attention to the implementation and even monitoring of safety protection measures regardless of any maintenance project, so as to ensure the safety in maintenance, especially the hot work, from ticket handling to replacement, and the arrangement of various protective measures, so as to be aware of it and be busy without chaos. Facts have also proved that all kinds of maintenance and hot work in our workshop can be completed safely and efficiently throughout the year, and there is no operation that violates the safety operation rules.

2. It can provide early warning and coordination for on-site hidden danger investigation.

If the decision on a fault or problem point is made after the conclusion is reached, I think it is not commendable. At present, we can only advocate early warning or forward-looking thinking, even if this early warning is residual or biased. Since the beginning of this year, I have questioned many abnormal phenomena such as coarse crusher, small slag pump and recovery pump in the north at the first time, and contacted to eliminate hidden dangers and ensure the safe and full-load production of the device. Unfortunately, there are also many questions, but when you bring them up, they pass like a breeze. For example, the problem of broken screws in the northern rougher can only be solved if it is above 10. Replace the lower channel steel and increase the spring, and finally solve the problem completely. There is also a small slurry pump, which we have put forward for a long time, but it is still a "usable" rhetoric, which eventually led to a failure at 2 o'clock in the middle of the night and almost reduced the volume.

3. There was also a breakthrough in emergency drills, which was well received by leaders at all levels.

In this year's emergency drill, I explored with my heart. First of all, I improved the hardware, registered all possible problems in my workshop, and finally compiled a book, Emergency Plan for Acetylene Workshop *** 12, with a cover and a table of contents, which can be seen at a glance. Then use Monday's safety activities to let the workshop staff learn, and finally organize the team to conduct drills. During the factory spot check in June 5438+01-June 5438+February, our workshop had three drills, which were fully affirmed by the factory leaders. At the same time, the form of "burying mines" that I used for the first time was also recognized by the leaders of the Ministry of Security.

(2) Team building has achieved initial results.

1, a necessary condition for improving team building from hardware.

This year, under the guidance of the branch leaders, I first improved some necessary conditions for team building from the hardware. I visited the electrolysis section of caustic soda factory three times, communicated with the section chief many times, consulted some good practices and advanced experiences in team building and section management, and learned from them, all of which achieved good results. For example, it has been improved in team assessment, employee incentive mechanism and various account management. At the same time, I also communicated with them on Monday's safety learning activities, emergency drills, on-site polite production responsibility system and other contents, which also aroused great interest of the caustic soda section chief and established a good image of the section.

2, department management gradually tends to be scientific and institutionalized.

I have always believed that the section chief, as the most basic management, especially the daily work of being a man, involves many aspects such as safety, attendance, process quality, civilized production, equipment management, economic assessment and so on, and is actually a "housekeeper". To deal with such a complex relationship, management must take the road of institutionalization, not arbitrary, let alone talk about human feelings and engage in relationships. Therefore, this year, our workshop played a game of chess when implementing the management standard of PVC acetylene workshop, and always insisted on measuring everything with a ruler, always paying attention to the ideological trends of every employee. To punish a person, we should not only pay off the money, but also master his psychological activities. If there is a pimple, you should help him solve it. You should not only educate him, but also make him happy, do a good job and control people. Especially in the aspect of team assessment, my section is selfless, with clear rewards and punishments; In the accounting management of the section, our section implements a fully open management mode, with special personnel in charge of money, deputy section chief in charge of accounts, section chief in charge of audit, section chief in charge of supervision, and monitor in charge of comments.

3. Carry out all kinds of work with the intention of constantly discovering and solving problems, and make bold attempts under the balance of "advantages" and "disadvantages".

Safety evaluation of chemical plants II

Over the past 20 years, under the correct leadership of the company, No.1 Maintenance Plant has conscientiously implemented the spirit of instructions from its superiors, adhered to the guidance of Scientific Outlook on Development, adhered to the policy of "safety first, prevention first and comprehensive treatment", firmly established the management concept of "people-oriented", earnestly practiced the working idea of "benchmarking management", and closely focused on the center of safety production and the annual work goal of no major safety accidents. Taking strengthening on-site management and strict investigation and management of hidden dangers as important measures, paying close attention to safety management and the implementation of post responsibilities, and carrying out various "safety education" publicity activities in depth, which effectively promoted the work of safety in production and realized accident-free safety in production throughout the year.

I. Main Work

(A) from the safety education, improve the safety awareness of all employees.

People-oriented, strengthen education and enhance employees' safety awareness. The workshop takes "improving employees' safety awareness and completely eliminating habitual violations" as the focus of safety management, carries out colorful safety education activities, and organizes all employees to participate attentively, thus improving employees' safety awareness. Every year, the workshop organizes all employees to concentrate on studying safety accident cases, and visit and study in time to take a warning and strengthen employees' safety awareness. Conduct free discussion of personal accident prevention group on time every month, and change "I want to be safe" to "I want to be safe". At the weekly workshop meeting, the regional directors report and summarize the potential safety hazards existing in the maintenance work, and formulate the tasks and objectives of step-by-step rectification. The team will hold a safety group meeting on "Safe Production and Standardized Operation" once a week, so that every employee can participate and learn about the unsafe factors in the work. The above-mentioned series of measures make every employee realize the importance of safe production from the bottom of his heart and greatly improve the overall safety awareness.

(two) to supervise and improve the workshop safety production work account.

Team is the most basic unit of safety production. Workshop based on the actual work, from childhood, details and reality, constantly improve the safety management level and safety operation skills of team leaders, and strive to improve the safety self-protection awareness and potential of each employee, so as to do a good job in the daily management of safety teams and groups. The work account of workshop safety production is a concrete and true reflection of workshop safety production work. Its information includes safety production inspection and rectification, safety production management system, safety work meeting minutes, special operations personnel training and registration, superior safety documents learning, industrial accidents, safety inspection records, weekly safety work summary, etc. The standardized and comprehensive account of each team has promoted the smooth development of workshop safety work. Safety information should be given at the daily pre-shift meeting, and personal unsafe accidents of employees should be restricted and sanctioned according to the safety reward and punishment system.

(three) to carry out various safety publicity and education activities to improve the overall quality.

In this year's "Safety Production Month" and "Safety Hundred Days" activities, the workshop closely revolved around the theme of "Safety First, Prevention First, Comprehensive Treatment", cooperated with the company to carry out various safety-themed activities, and organized all the staff in the workshop to learn safety knowledge, answer questions, and ensure everyone's participation and benefit. Through the publicity column of the workshop, the workshop staff will be informed of the five points for attention in summer, hazard risk identification and common sense of first aid of harmful substances. , so that employees can have a further understanding and education on special hazard risks. In various safety production activities throughout the year, the workshop pays attention to practical results and all employees participate, ensuring that the safety activities are both solid and effective, and the overall safety level of all employees in the workshop has been improved, creating a strong atmosphere of "everyone stresses safety, everything should be safe, everywhere should be safe" for employees, and comprehensively promoting the company's work to a new level.

(four) to strengthen the supervision and inspection of the maintenance site, pay close attention to the site management.

The focus of safety management is on the site. In order to ensure the production safety, the workshop director and safety officer conduct on-site safety monitoring and hidden danger investigation on key links according to the progress of major maintenance projects in various regions to ensure the safe operation of the maintenance site. All functional personnel in the workshop shoulder the responsibility of safety supervision, and have an unshirkable responsibility for the safety and feasibility of on-site hazard identification and maintenance scheme. When illegal operations are found, they are obliged to stop them in time and report to the workshop. In order to ensure the safe development of production, we must report and solve safety-related problems in maintenance in time to eliminate unsafe factors in production. Carry out the daily safety inspection of district directors, pay close attention to the investigation and management of hidden dangers, combine safety self-inspection with special inspection, routine inspection with surprise inspection, inspection with rectification, and constantly eliminate the unsafe factors of people, machines and environment in production. The workshop stipulates to check the safety status of the workshop at least once a week, and report the inspection results in time. By constantly searching for weak links in safety management, hidden dangers of equipment and dangerous points in the process of operation, the problem can be truly solved and hidden dangers eliminated on the spot, which has better solved the problem of "lax implementation" of safety.

Second, the existing problems and improvement measures

(1) Some production workers have weak safety awareness and low safety quality.

(two) the "three violations" phenomenon is not enough to identify the assessment.

(3) There is still a lack of communication and coordination with the workshop.

(d) Cultivate a good safety atmosphere, safety literacy is very important, and employees lack self-criticism, mutual cooperation and mutual supervision.

Three, 20__ years of safe production.

The maintenance and operation of the first workshop will first take safety as the primary task, highlighting the system construction of safety and quality standardization, safety training, team safety management and on-site management.

By strengthening publicity, organizing self-examination and self-correction, strengthening skills training and strictly regulating operation, the overall level of workshop safety standardization can be effectively improved. Continue to adhere to the work goal of no accidents in safety production throughout the year, go all out and concentrate on safety production, and strive to achieve the goal of zero safety accidents throughout the year. Secondly, the workshop will do a good job in safety education in various forms, take the typical accidents inside and outside the company over the years as educational materials, conscientiously implement the company's "100 safety activities", do a good job in safety production, do a good job in safety inspection, focus on managing and eliminating all kinds of safety hazards, and ensure safety production. Finally, the safety management will be refined, and the safety work will be implemented to everyone, so that everyone has safety responsibilities and goals, and the safety work will be managed at all levels, with the first level being responsible for the first level and the first level being responsible for the first level, and the safety management will be implemented at all levels.

Looking at the safety work of the first workshop for 20 years, the goal is clear and the results are remarkable, which has played a great role in ensuring the completion of the annual operation task. At the same time, there are indeed many weak links and deficiencies in our work. We will face up to the existing problems, continue to explore new ideas and methods, and take actions to promote the overall improvement of safety work. Twenty years have passed, and a new year has come. Looking back, we deeply feel the great responsibility on our shoulders and the importance of safety work is more important than Mount Tai. In the future, Maintenance Workshop No.1 will make greater efforts to do a good job in workshop safety production, and strive to achieve safety production without major accidents every year.

Safety evaluation of chemical plants

65438, 20__,10.2 The direct cause of the accident was that the deceased did not abide by the safety rules and operated illegally without authorization; The indirect reason is that the safety protection measures of the company where the deceased worked are not in place and the safety training of the executive management unit is not in place. In recent years, China has entered a period of rapid development of the construction industry. With the acceleration of industrial construction and urbanization, frequent construction accidents have sounded the alarm for the managers of construction enterprises. Analyzing the causes of safety casualties is of great benefit to reducing accidents and promoting the healthy development of enterprises. In order to effectively reduce and eliminate safety accidents, we must re-recognize and implement the following points:

First, improve safety quality and prevent accidents. The main source of this accident is that the operator lost his awareness of the predictability and consequences of the accident at a critical moment, which is what he usually calls safety luck. Therefore, to grasp safety production, we must pay special attention to the education and improvement of people's safety cultural quality and safety thinking and behavior.

Second, improve the safety awareness of employees in many ways. Safety work has only a starting point and no end point. All employees should teach each other, learn from each other, learn from each other's strengths and improve together.

Third, establish the concept that safety is benefit. At work, we should not only master various operating procedures skillfully, but also develop good safe operating habits, put an end to habitual violations, and dare to be serious with unsafe behaviors around us. Every employee should supervise each other in their daily work, remind each other and eliminate potential safety hazards in time.

Fourth, pay close attention to safety training. As long as everyone pays attention to safety, always pays attention to safety, puts safety in mind and eliminates any tolerance for safety work, the company's safety work will certainly be better. Safety is the cornerstone of the rise and fall of enterprises, the lifeline of enterprises and the premise of benefits. Safety in production is related to the safety of workers' lives, the safety of enterprises' property and social stability. Therefore, as employees of Guanghui New Energy, it is even more necessary to strengthen safety technology training and learning to enhance their own safety awareness. Do a good job in safety awareness education, safety knowledge education and safety operation skills education. Let everyone be safe, know how to be safe and safe. This accident is closely related to some people's poor safety awareness and improper emergency handling, which shows the importance of safety education. We should conscientiously learn from the accident, draw inferences from others, find out our own shortcomings and hidden dangers of accidents, take effective measures to improve our work, eliminate hidden dangers, and nip accidents in the bud. As a chemical enterprise, inspection is extremely important. Through the fixed-point, fixed-time and fixed-line patrol inspection, the abnormal situation and accident signs in the production process are found in time, and measures are taken in time to eliminate them. At the same time, we should conscientiously implement the planned maintenance of production equipment to ensure the safety and reliability of production equipment and avoid all kinds of accidents.

Safety evaluation of chemical plants

The short safety training is coming to an end. As a member of the company, I received a great education and felt deeply. Have a deeper understanding and perception of self-responsibility.

It is necessary to strengthen the management of production safety.

First, we must firmly establish the idea of "safety first, prevention first", which is the working principle of safety production and the summary of long-term experience in safety production. It is necessary to carry out the work policy of "safety first, prevention first" to the height of stressing politics, promoting development and ensuring stability, and deeply understand that grasping safety means grasping development, grasping safety means grasping stability, and grasping safety means protecting productive forces. Correctly handle the relationship between safety and production, safety and management, and safety and efficiency. In the process of normal production organization, we must abide by the laws and regulations on safety production, strengthen the management of safety production, establish and improve the system of safety production, improve the conditions of safety production and ensure safety production.

Second, we must intensify the investigation and management of hidden dangers of accidents to prevent all kinds of accidents. Safety production prevention work must be regular. We should adhere to the work policy of putting prevention first, do a good job in the investigation of hidden dangers of safety accidents, actively encourage employees to help find and discover hidden dangers of accidents, and conscientiously implement the inspection of safety production. Safety inspection is an effective means to perform duties, standardize management behavior, find hidden dangers of accidents, promote rectification of hidden dangers and reduce "three violations". After institutionalized, standardized and professional safety inspection and hidden dangers rectification, all kinds of hidden dangers in the production site have been actively and effectively eliminated.

The third is to strengthen publicity, training and education, and strictly implement three-level safety education to ensure that employees have the necessary knowledge of safety production, be familiar with relevant safety production rules and regulations and safety operation procedures, and master the safety operation skills of their posts. Without safety education and training, qualified personnel are not allowed to work at their posts. Training and education is an effective way to improve the safety quality of employees and put an end to "three violations" Based on the three-level safety education, various forms of publicity and education work are carried out from the aspects of safety production policy, safety laws and regulations, safety management system, safety operation procedures, safety prevention skills and awareness. , so as to comprehensively improve the overall quality of employees and effectively reduce or even eliminate accidents.

Second, we must do a good job in fire safety. First, strengthen the management of fire safety work, organize regular fire safety inspections, investigate and rectify fire safety hazards, and effectively combine fire safety work with production and operation management to ensure the smooth progress of all work; Second, publicity and education should be put in place. Through fire safety knowledge training and fire drills, employees' awareness of fire safety should be improved, and their skills of fighting and self-rescue should be improved. Third, the system and measures should be put in place. According to the relevant laws and regulations on fire protection and the actual situation of the branch, a set of effective systems and measures should be formulated and strictly implemented to ensure the normal and orderly development of fire safety work. Fourth, fire-fighting equipment should be equipped in place, with a sufficient number of fire-fighting equipment and regular inspection and maintenance, and outdated equipment should be replaced in time in case of accidents, providing hardware guarantee for the smooth development of fire safety work.

Safety is an eternal topic for enterprises. "Safety must be the safety of production and production". Safety production is related to the stability of enterprises and the safety of employees' lives, and the work has a long way to go. Only by persistently eliminating hidden dangers and nip in the bud can we persist in the long-term stability of the good situation of safe production.

Safety evaluation of chemical plants

Time flies, one semester of chemical safety knowledge learning is coming to an end. A semester brings me a lot of feelings. It makes me feel that any enterprise is safe and lost in the accident. No matter where we are, we should study safety knowledge seriously.

The success of an enterprise lies in safety, and the failure lies in accidents. Any accident is an irreparable loss to the enterprise, and it also causes irreparable pain to families and individuals. Safety awareness should be firmly rooted in everyone's heart at all times, so that everyone can understand that accidents will occur if the responsibility is not in place, and correctly realize that safety is not a person's problem, but you have me and I have you. It is an interconnected, mutually protective and interlocking chain, and it is a complex and closely linked chain. Looking back on the recent traffic accidents in our factory, I remind everyone of the importance of safety again and again. These painful cases reflect the lack of safety education, indicating that there are still great defects in the publicity and popularization of safety knowledge, and our safety management system is still so fragile! "Safety is benefit", this view should be rooted in everyone's heart. First of all, arm yourself, be familiar with the safety system of various operating procedures, and seriously study the relevant laws and regulations on safety; Secondly, develop good habits of safe operation, put an end to habitual violations, and dare to seriously deal with unsafe behaviors around you and even your superiors; Be diligent in inspection, and discover hidden dangers of rectification accidents in time. There are many hidden dangers and dead ends in front-line posts, and habitual violations are more common. If we only talk about safety in form and deal with inspection, then even if we invest more and pay more, the safety environment will not be improved in essence, and the safety management level will never be improved in essence! If every employee supervises each other, reminds each other and checks each other in their daily work, finds loopholes and weak links, prevents unsafe factors, eliminates hidden dangers of accidents, and starts from small things, a safety levee can be built.

No danger means security, and no loss means security. Safety means that in the process of life and production, people's lives are guaranteed, their bodies are not harmed, and their property is not lost.

Let everyone pay attention to safety, always pay attention to safety, keep in mind "safety in production", strictly abide by the chapter of operating rules and the safety production law! Let everyone clearly understand that breaking the rules means going to an accident, hurting yourself, hurting others, and even dying. Don't have any pity, because maybe a small casual violation will cause great harm or loss and become illegal. If each of us can really realize this, then our work safety will be better, our enterprise will last forever, and we can live happily in a safe and harmonious environment.

No danger means security, and no loss means security. Safety means that in the process of life and production, people's lives are guaranteed, their bodies are not harmed, and their property is not lost. Safety production is the key point of oilfield enterprise management in China, and it is also the fundamental guarantee for our development. Safety is benefit. If I were a security officer, I would plant this idea in everyone's heart (including myself). First of all, arm yourself, be familiar with the safety system of various operating procedures, and seriously study the relevant laws and regulations on safety; Secondly, develop good habits of safe operation, put an end to habits and violations, and dare to be more serious with unsafe behaviors around you and even your superiors; Three, diligent inspection, timely discover the hidden dangers of rectification accidents. Perform the duties of safety officer, make a summary and put forward more reasonable suggestions to superiors; Finally, from wearing safety helmet, wearing safety belt, wearing work clothes and issuing work tickets, we will persevere.

Front-line workers are the main force of safety production. Without the participation of workers in supervision and management, it is difficult to do a good job in safety production. When everyone is a safety supervisor, not only do you have to remember the importance of safety production on the day when you are a safety officer, but you should also always pay attention to safety. Even if he is not the safety supervisor, he should keep "safety in production" in mind. If each of us can truly have such a realm, then our work of safety in production will be better. As a safety officer, we should use a sincere heart, safe rules and regulations and thoughtful service to safeguard the safety and health of workers and create a good production environment for people.

Since each of our employees stepped into the door of the chemical industry, they began to understand safety education. "Safety first, prevention first", we keep it in mind. We talk about it all the time, study it every week, and shout it every month. Safety work rules have been broken one after another, and safety learning records are thick one after another. So why is the result of an accident analysis "illegal"? I don't think anyone will have any doubts about the safety work rules, technical operation rules and enterprise discipline regulations. These are the condensation of blood lessons, and everyone is familiar with them. They are three magic weapons for every employee, but why can't they be put into action in the end? The reason is that with the idea of passing the exam and luck, the string of safe production is missing.

Five articles about safety evaluation of chemical plants;

★ Five essays on the work summary of chemical plants in 2020.

★ 5 safety trainings for employees of chemical plant in 2020.

★5 excellent model essays on internship reports in chemical plants

★ Five five-minute safety speeches

★ Four summaries of safety production in chemical enterprises.

★ Year-end Summary of Chemical Plant in 2020 Fan Wenxuan

★ Model essay on personal work summary of chemical plant in 2020

★ In 2020, the monitor of chemical plant summarized 5 articles at the end of the year.

★ Selected model essays of five company safety speeches

★ The safety officer shall summarize the excellent model essay at the end of the year.