What should I pay attention to when using the driver in the workshop?

1. No vehicles are allowed for non-work needs. Vehicle movement within the company must be carried out by personnel designated by the company, and non-designated personnel are not allowed to move vehicles. Second, all motor vehicles entering the company must run at a speed not exceeding 5 km/h in the company, and it is forbidden to test the brakes in the factory and test the dynamic performance of the vehicles on the road. In case of violation, the person and related leaders will also be fined 500 yuan. Three, accident car into the workshop or moving accident car in the workshop, in order to prevent the traffic danger caused by vehicle mechanical failure, it is necessary to check that the braking system, steering system, cooling system and lubrication system did not exercise safety hazards before moving at the specified speed of 5 km/h.. In principle, all accident vehicles moving station by station in the workshop are implemented. Four, the vehicle into the station, lifting, four-wheel positioning, line inspection, the driver must confirm that there are no people before and after the operation. When maintaining and inspecting the vehicle, if it is necessary to start the engine, you must first pull the hand brake, and then confirm the gear position of the vehicle (the automatic transmission is in the parking position and the manual transmission is in the neutral position) before starting the vehicle. It is forbidden to stand in front of the vehicle and directly pull the throttle cable to test the engine.