What should I pay attention to in car film?

At present, there are many kinds of automobile films in the automobile market, and the quality is mixed. If amateur car owners are not careful, they will inevitably be deceived and spend high prices to buy inferior movies or fakes. As we all know, inferior film not only endangers driving safety, but also easily causes hidden dangers of glass, and even affects the health of drivers and passengers. When the owner decides to photograph the car, he should pay attention to the following points:

1. Decide to shoot and choose good weather:

Taking pictures of your car depends on the weather. Cloudy days and after rain are the best weather for filming. Because on cloudy days and after rain, the air is humid and there is almost no suspended matter, at this time, the appearance of the film will not be affected by impurities.

2. Movie shops require formal:

Generally, regular automobile beauty shops are equipped with professional film pasting workshops, because the film pasting process must be relatively dust-free and cool. Car owners should not choose some roadside shops or even some unreliable black shops in order to save money, which will not only lead to the film quality not meeting the requirements, but also damage the car body and car glass, which is not worth the candle. Because movies are most afraid of dust and gravel, it is difficult to clean the working environment on the street.

3. Preparation is crucial:

Before sticking the film, thoroughly clean the inside and outside of the car with a steam car washer, then protect the facilities inside the car, and cover the seat and dashboard with a plastic cover. When pasting the film, avoid using lubricants that are easy to fade the film, and don't paste the film in direct sunlight, because the film pasted in this way is easy to wrinkle and blister, which greatly affects the image and beauty of the car.

4. The front and rear windshields shall be completely posted:

The rear windshield of a car has a curvature, and the glass of imported cars is bigger, so the curvature is bigger. The professional technology is to cut the whole solar film according to the size of the rear windshield, bake the film outside the rear windshield to the same radian as the rear windshield with special tools and hot air guns, and then stick it in the car.

5. After pasting the film, protect it carefully:

After the car film is finished, it is necessary to pay attention that the side window should not be opened in 24 hours in summer and 48 hours in winter, and do not push the edge of the film with nails or sharp objects to avoid dirt from entering. If there are bubbles, you should go to a professional car beauty shop for treatment within 24 hours.

6. Prevent self-explosion and wash the car carefully:

Under the scorching sun, the temperature of the front windshield of the car is extremely high, so you can't directly wash the hot car with cold water, especially you can't directly wash the front windshield with a high-pressure water gun, otherwise the glass will be easily damaged or even burst immediately due to rapid cooling. If the glass is often cleaned in this way, the phenomenon of glass self-explosion will occur during the driving of the vehicle. It is suggested that you choose a steam car washer as much as possible when washing your car, because this car washer uses the thermal degradation principle of steam to bond, soften, expand and separate the dirt on the surface of the car through soft steam, which will not cause damage to the car.