5 general personal work summaries for power plant employees

A written material that summarizes the review and analysis of study and work life in a period, a year, and a stage. It is a good way to increase your talents. It is better to take action immediately and write a summary. Let’s summarize. How should we write a summary? The following is a summary of the personal work of power plant employees that I have compiled for you. I hope it can help everyone!

Personal work summary of power plant employees 1

Time flies, I graduated from Hubei Urban Construction Vocational and Technical College majoring in construction engineering technology in July 20__, and joined _____ Engineering Co., Ltd. in __. In this short period of more than 2 years, I not only deepened my Understand the knowledge originally learned, and have a better understanding of knowledge that has not been touched or not deeply touched in previous books. Since I started working, under the cultivation and guidance of leaders and supervisors, through my own efforts, I have made great progress and huge gains in both study and work. The work is now summarized as follows:

In terms of study, since I joined the work, I have been strict with myself, take my work seriously, and strive to improve my abilities. At this point, the company has given me very good conditions: a large number of actual engineering cases, which are really good guidance for our new graduates; and a wealth of books and materials, which can give me a very good understanding of the situation. It is a good opportunity to develop knowledge, and you can also get timely information and understanding of the development and changes of the industry. In addition, the positive working environment and high-quality staff team of the design institute further motivates me to continue learning, constantly surpassing myself, and constantly improving myself.

At work, the first project I participated in was the garden project design of Yongdonghe Guidongyuan. In this project, I became familiar with the basic process of project design and applied the Tianzheng Architecture I studied in school. , applied CAD skills to actual work, learned a lot of practical experience, and also knew how to communicate with Party A and deal with problems encountered in the design. The final construction drawings of these two projects were successfully completed and delivered to Party A in January 2008 and July 2008 respectively. During this period, I have been conscientiously cooperating with my colleagues and following the guidance and arrangements of my supervisor. During the project, I clearly understood the detailed process of the project from the plan, expansion, and construction drawings, learned many specifications in the design, and strengthened my work The ability to get along with people and deal with problems. My professional knowledge and skills have been greatly improved through the guidance of my supervisor and communication with senior employees. After that, I also participated in the design of projects such as Limao, Bicui Huating, Jinxiu Huating and Beihuan Road Landscape. During this period, I paid a lot and gained a lot. After more than a year of work and study, I felt that as an engineering technician, I must be careful and conscientious, do every step of the work, and have a thorough understanding of the design process. You must be familiar with the drawings and even more familiar with the specifications. You must continue to learn design-related and professional-related knowledge and arm yourself with knowledge. In addition, you must learn to communicate with others at work, how to behave, and establish correct attitudes. Outlook on life and values.

With the development of society, people have higher and higher requirements for design quality. Quality is a solid foundation for the survival and development of an enterprise. The improvement of quality depends entirely on the overall quality of employees and the improvement of technical management level. , in order to be able to face more fierce competition, cultivating high-quality, high-level professional technical and management personnel is the company's focus. In the past year of work, with the care of my leaders and the support and help of my colleagues, through continuous efforts, I have adapted to the work rhythm and have certain technical work capabilities, but there are still some shortcomings. I will try my best to improve myself in future work. It is necessary to strengthen study, overcome shortcomings, and strive to continuously improve my professional and technical level. At the same time, I clearly realize that in order to adapt to the new situation of garden design, I need to continuously strengthen theoretical study in the future, especially the study of new technologies and new theories, and strictly Demand yourself, constantly be realistic and innovative, exercise and grow in practical work, accumulate work experience, cultivate work ability, and strive for greater results.

Personal Work Summary of Power Plant Employees 2

With the arrival of the New Year, we have passed the 20__ year. Looking back, I can see how much hard work I have done and how much I have gained. In 20__, through the joint efforts of the entire class and cooperation, various production tasks were successfully completed on the basis of ensuring safe production. Here is a summary of the main work in 20__

1. Safety production:

1. The annual attendance rate is 98. ____.

2. The team system has been modified and improved.

3. Strictly implement the defect elimination management system and run three inspections. It effectively ensures the healthy operation of the equipment and contributes to the safety and multiple power supply of our factory.

4. 180 equipment defects were found throughout the year, including the high backup transformer 105 switch found in July that refused to operate and the #1 main transformer neutral point overheated to 100 degrees found in October. Both were promptly notified for maintenance. Take care of it. Possible equipment accidents are eliminated.

5. Cooperated with the maintenance to complete the major and minor repair work of the unit and the replacement of related equipment. Throughout the year, 161 large-scale operations were carried out and 407 work tickets were issued.

6. Organized the whole class to participate in the safety examination organized by the factory, with a reference rate of 10____ and excellent results.

7. Seriously carry out the "Youth Safety Production Demonstration Post" activities throughout the year and pass the review by the Youth League Committee of the main factory.

8. The "five no's" and "zero violations" were achieved throughout the year, and no unsafe phenomena occurred.

9. Carry out team safety activities seriously, organize the study of relevant documents and relevant technical measures, and learn lessons from relevant safety incidents. We carefully carried out Chun'an and Qiu'an inspections to eliminate habitual violations and rectify the identified problems in a timely manner, effectively ensuring the safe production of the team.

10. By the end of the year, the number of safe production days for the team had reached 5936.

11. Strengthen team management, improve the quality of duty, and ensure that there are no violations of regulations or disciplines throughout the year.

2. Training:

1. Regular training was completed on time and with good quality every month and achieved good results.

2. Organized the whole class to participate in the transportation regulations examination organized by the factory, with a reference rate of 10____ and excellent results.

3. Organize and learn #3 machine knowledge and equipment replacement, and master relevant operating skills.

4. Regularly organize and study operation regulations.

5. Huang Jian won the title of "Expert in Electrical Operation Technology for Units 100mw and Below" from the main plant.

6. The team trained one qualified squad leader (Cheng Yang), one special area officer (Huang Yugang), and two on-duty officers (Wu Fei, Huang Yi).

7. Two personnel participated in the "200mw unit electrical operation" training organized by the main factory.

8. The training plan at the beginning of the year was realized.

3. In terms of spiritual civilization construction and democratic management:

1. Completed the publicity tasks assigned by the main factory and submitted 15 articles. In particular, the "5.18 Accident" essay solicitation and safety warning signs

were adopted by the main factory.

2. Make class affairs public on a regular basis. Announce the income and expenditure, sources and uses of class fees.

3. Regularly carry out activities to evaluate the squad leader.

4. Actively build a small family for employees and carry out trade union activities to create unity and mutual assistance within the class, so that the team has strong cohesion.

5. Actively participate in the two labor competitions organized by the trade union.

6. Our class’s “Youth Safety Demonstration Post” successfully passed the review by the Youth League Committee of the main factory.

7. Actively strive to become a “model team” in the main factory.

4. Do a good job in team building

Teams are the cells and foundation of an enterprise. The quality of team building is directly related to the development and survival of the enterprise. Doing a good job in team management, improving the quality of the workforce, enhancing the vitality of the team, and giving full play to the role of each member are the foundation of team building.

1. Carefully standardize and prepare all kinds of accounts in a timely manner, and implement fixed management of all tools, equipment, and team information.

2. Keep team software records carefully.

3. On the basis of the "standard team", strictly follow the requirements of the "model team" and standardize all work within the class.

5. Problems and measures to be taken:

1. The implementation of team system is not strong enough.

2. The learning progress of new team members is not ideal enough.

3. Measures:

1) Strengthen the vertical execution of the team system, give full play to the role of the five major members and backbones of the team, each perform their duties, do their best, and implement the responsibility system.

2) Strengthen training and adopt different training methods for different people. Team training should be conducted from as many angles and in many ways as possible. Make learning interesting.

Personal work summary of power plant employees 3

I have been working in our factory for more than a year. During this year, I abide by factory disciplines and regulations, abide by department management systems, and work in the factory. , work under the leadership of department leaders has always been serious and proactive, able to complete the tasks assigned by the leaders on time and in quantity, focusing on business and technical exchanges, cooperation, and harmonious relationships with colleagues, constantly accumulating business work experience, and quickly moving along the way Apply rational thinking to work practice. After more than a year of hard work, some results have been achieved and now I am assuming my job. It is summarized in the following aspects:

In terms of ideology, I have always regarded the factory as my home. I fully understand the principle of "I am honored when the factory prospers, and I am ashamed when the factory declines", and insist on doing everything from me. Starting from the beginning, we should seek truth from facts, work hard and be conscientious, adhere to the principle of working carefully and resolutely adhering to the position, actively and proactively do our own work, and be ready to accept inspection and assessment from the factory at any time.

In terms of work, I am conscientious, self-denying, and stick to my position. I put work first, obey the leadership arrangements, and conscientiously complete every task assigned by the leadership; I humbly learn business knowledge from my colleagues and pay attention to Work together and get along well with colleagues; work conscientiously and proactively, and complete tasks on time and with quality. In terms of self-construction, I have always focused on the accumulation and improvement of my own business knowledge and professional knowledge, and strived to arm myself with constantly updated knowledge and theories, so that I can continue to adapt to every problem encountered in my work with new methods and concepts, and be able to truly Keep pace with the times. In the past year, I actively participated in activities organized by the factory, and worked hard to learn work-related professional technical knowledge and literary knowledge after work, and strived to improve my self-cultivation and improve my own quality.

Generally speaking, since I entered the factory, I have always cherished the existing working environment of the factory in my mind, and it is my responsibility to make due contributions to the factory; in terms of work, I work diligently, obey the leadership arrangements, work proactively, and complete the work on time, quality and quantity as the principle to ensure that my job is perfect; on my own side, I earnestly accumulate work experience and pay attention to the improvement of professional theoretical knowledge, in order to make my business better. The level keeps improving. I know that the correct attitude, carefulness and patience of employees at work are the guarantee of business efficiency and quality. In future work, I will continue to do my best to do my job well. Better, make your due contribution for a better tomorrow for our factory.

Personal work summary of power plant employees 4

Over the past year, as a power plant supervisor, I have worked hard to learn professional and technical knowledge with full enthusiasm for work, and strictly abide by various operating procedures Follow the regulations, ask for advice humbly, unite colleagues, continuously improve work ability, and do your job well. Here is a summary of the work over the past year:

1. Work seriously and responsibly, be dedicated and love your job, and demand yourself according to the company's philosophy, Treat people with integrity, work in a down-to-earth manner, obey leadership arrangements, overcome physical discomforts such as pregnancy reactions, and always treat work with a positive and serious attitude.

Especially in April, when two units were running at the same time, the labor intensity increased, and some online instruments were inaccurate, requiring complete manual analysis. For example, according to the normal test procedure for one unit, the test would take two hours, during which time medication would be added. , monitor water quality, inspect equipment, and discharge sewage during night shifts. At first, I was so busy that I couldn't even bother with the toilet, and I was worried that the water quality wouldn't be controlled in time. Later, he actively adjusted his work ideas, grasped the key points, and first did the ones without online instruments and those with large water quality fluctuations, and then those with relatively stable water quality indicators. The water samples of the two units were cross-tested, so although

One person per post, still persevere, keep abreast of water quality conditions, and better regulate water quality.

2. Technically study carefully, theoretically memorize the operating procedures, and purchase other chemical learning materials; in practice, strictly abide by the operating procedures, cultivate independent operating capabilities, ensure that no misoperation accidents occur, and perform the work properly Write down the problems you encounter, the experiences you gain, and the things you need to pay attention to at any time, and humbly ask the masters and specialists for advice. Although you can work independently, you know that it will take time to practice the chemistry major thoroughly. , the accumulation of knowledge, step by step, one month is better than the other. Even during maternity leave, use the intermittent time to read professional chemistry books so that you can be at work when you are not physically present. You can also make full use of network resources at home, check the chemical literature of power plants, broaden your horizons, and continue to recharge. I hope that you can use your new knowledge after taking up the job. Treat work with a high degree of awareness.

3. Ability includes coordination ability and accident handling ability. If "technology" is compared to "IQ", then "ability" can be compared to "emotional quotient". The same is true for chemistry majors. A high IQ will It doesn't necessarily mean you have high emotional intelligence, because technology is dead and ability is alive. For example, in July, the dissolved oxygen in the condensate water of Unit 2 suddenly increased. There was no chemical operation. After questioning the turbine personnel, it was found that due to operations to adjust the water level, the upper part of the deaeration device did not reach a vacuum, resulting in a sudden change in the value. This was not a deterioration of water quality. Therefore, the ability to judge quickly and accurately, and to learn and apply it flexibly can help you do your job better.

4. Accumulate work experience and implement the company's "energy saving and consumption reduction". On the basis of qualified water quality, we must strive for excellence and safe operation first, and economic operation must also be taken into consideration. If the water quality of the No. 1 boiler is still unstable in May, you must proactively consult the centralized control room to understand the load changes. When the load is low, try to open the Dalian row as much as possible to ensure the steam quality and make the boiler water qualified and stable as soon as possible. When the continuous discharge is opened at high load, the sewage discharge effect is not obvious and it is a waste of working conditions. Therefore, we should try our best to save resources on the basis of opening Dalian platoon as much as possible and grasp the balance point between the two. Implement low phosphate treatment in June and control the dosage of boiler water to prevent acid corrosion of the boiler without wasting medicines. It also prevents long-term artificial salt accumulation and scaling in the boiler. In order to achieve three birds with one stone, we are even more careful Measure, monitor carefully, worry about equipment, communicate patiently.

5. Suggestions:

1. Can the safety facilities be more complete and detailed, and set up equipment malfunction protection measures, fault drill plans and acid-base accident rescue plans to prevent accidents? In the future, we will update the traditional concept of chemical supervision and change it from passive disposal to proactive prevention.

2. Strengthen the degree of computer automation. It is best to make full use of network resources and make the best use of them to make chemical water quality supervision more sensitive and efficient; improve chemical online instruments and fully automatic operation and maintenance of instruments, so that Chemical test results are more scientific and accurate.

3. Nowadays, we are all talking about environmental protection awareness. As a thermal power generation enterprise, can we also brainstorm and come up with more water-saving measures, use less or no chemical reagents, and fully implement water recycling and reuse? This is just my immature idea. Due to my limited personal ability, I still need the professional and technical knowledge of masters and specialists to look at it.

___ year is coming. The new year has a new beginning, new pressure, and new breakthroughs can only be achieved by setting new reasonable goals.

1. Continue to study chemical expertise, improve accident handling capabilities, strive to become more proficient in soda and water supervision, and be able to operate water treatment work.

2. While doing your job well, learn about other professional knowledge and strive to achieve the company's "all-round training" goal as soon as possible.

3. Continue to exert the spirit of unity and cooperation, strengthen the philosophy of China Resources, and encourage ourselves to have higher understanding and development

Personal work summary of power plant employees 5

20__ 2019 is an extremely extraordinary year. Under the strong leadership of the group and the company, facing the complex and changeable internal and external environment and the impact of the global financial crisis, all employees of the power plant work together, strengthen management, forge ahead, and be solid and effective. Promote the development of various tasks in an all-round way and maintain the stable and rapid development of the economic operation of the power plant. Relying on the group's circular economy development advantages and focusing on safety production, energy conservation and consumption reduction, and key project construction, we have achieved good economic and social benefits. The work plan and production goals set at the beginning of the year were successfully completed.

I would like to report to all the leaders and colleagues on the production situation of the power plant this year, and ask the leaders to criticize and make corrections without hesitation. By the end of the year, our company had generated 4.5 billion hours of electricity, supplied 1.8 million tons of heat, and achieved zero accidents in safe production. The achievement of these achievements is inseparable from the care and support of leaders and colleagues.

1. Improve the level of safety production management, strengthen the awareness of safety responsibility, and keep the alarm bells ringing.

Everyone knows that doing a good job in safety is a prerequisite for enterprise operation and development. For our power plant, safety production is related to the livelihood and contentment of thousands of households, to the safety of people's lives, to the stability of a harmonious society and economic development, and to the vital interests of the company, so safety production management is particularly important. To this end, we resolutely implement the safety production policy of "safety first, prevention first, comprehensive management" and establish the concept that safety is efficiency. The main leaders of safety production work focus on it, the leaders in charge personally handle it, and the safety management department specifically handles it. Implementation is carried out at all levels, and safety production work is integrated into every production activity. We have taken the following measures:

1. At the beginning of the year, the power plant and the department signed a responsibility letter for comprehensive target management of safety production and traffic safety work target responsibility. We will strengthen assessment, rewards and punishments for key production departments, and raise the level of production. By signing a safety production responsibility letter, safety responsibilities are decomposed and implemented at all levels. One level is responsible for the other, and the first level is responsible for the first level, so that the upper and lower levels work together and jointly focus on management, forming a top-down, from top to bottom, safety production management A safety management network composed of full-time (part-time) safety officers from departments to all levels, horizontally to the edge and vertically to the bottom. Effectively implement safety work to the post and the responsible person, and implement a head-to-tail responsibility system of whoever is in charge is responsible; whoever is on duty is responsible; whoever operates is responsible; whoever signs is responsible. Strengthened the responsibility for safety production management and laid a solid foundation for safety production.

2. Formulate learning and training plans, insist on putting safety training first, conduct training for cadres and employees in phases, and closely integrate safety learning and training with the annual safety production month activities to fully In 2017, we organized 7 safety knowledge trainings. All power plant personnel participated in the training, so that employees could firmly establish their awareness of production safety.

3. Hold regular production safety meetings every month to inform superiors of production safety documents and the spirit of leadership speeches, summarize the completion of production safety work in the previous month, analyze the production safety situation, and solve difficulties encountered in production safety, Determine the major hidden danger management plan, implement the responsible departments, and study and deploy the next stage of safety production work.

2. Strengthen employee training, improve professional quality, and achieve all-round duty

To ensure the safe production and economical operation of the unit, the "human" factor is the first, and only the entire workforce Only when the quality and professional level are improved can the job be guaranteed. We have always placed employee training in an important position. Specialized workers in various specialties provide centralized training and gradually achieve the goal of fully capable employees on duty.

There are 3 to 4 concentrated lectures every month, and business examinations are held at the end of the month. A reward and penalty system is implemented for the last place. A penalty system is implemented for employees who are in the bottom three in the steam turbine and boiler professional examinations, and the last one in the electrical and laboratory examinations. , implement a reward system for employees with good performance. This measure makes all employees have a sense of urgency and change "I want to learn" to "I want to learn", forming a strong learning atmosphere of comparison, learning, catching up, helping and surpassing. , the professional level has been significantly improved, and professional skills are increasingly enhanced.

This year our power plant built a new ultra-high voltage unit. In order to truly achieve all-round duty, we selected 3 outstanding employees from the machine and furnace majors in September based on their daily performance, and selected 2 outstanding employees from the electrical major. An outstanding employee was led by the director of the Biotechnology Department to study in other power plants for 15 days. Each squad leader took turns to study. After returning from the study, each person wrote a summary and experience of the study. After returning to the factory, each professional staff is temporarily assigned to the corresponding maintenance workshop to follow the installation and become more familiar with the equipment.

3. Strengthen standardization, standardized management, and promptly eliminate hidden dangers and defects in equipment

In accordance with the management requirements of "two systems, three votes", the Ministry of Biotechnology has formulated an annual "two measures" plan , equipped with safety equipment in safety equipment management. Based on the actual production situation, a number of various regulations and operational documents were revised and improved, and safety production compliance activities were carried out in September. By convening safety production analysis meetings on time, all potential safety hazards raised were assigned to specific responsible departments and personnel, and rectifications were made on a regular basis.

In the maintenance management, we strictly control the quality of maintenance, and timely adjust the "two votes" and "three systems" according to the personnel changes. In line with the principle of "repairs must be repaired, repairs must be repaired", completed #2 The overhaul of the steam turbine and #1 boiler focused on the implementation of technical transformation projects such as the transformation of the water wall of the #1 boiler. With a small number of personnel and heavy tasks, all employees gave up their holidays, braved the scorching heat, and worked overtime, and it only took 45 days. The replacement of the water-cooled wall of the #1 boiler was completed, and the suppression was successful in one go. It achieved "one success" of ignition, flushing, and grid connection after the machine and furnace were overhauled. The overhaul task was completed with high quality and efficiency, ensuring that the main and auxiliary equipment were intact. The rate reaches 100.

In operation management, economic indicator assessment methods have been formulated in accordance with the small indicator assessment methods issued by the power plant. In the face of the adverse factors of rising raw materials for power generation and heating, we have comprehensively strengthened indicator management, reasonably arranged operation methods, and improved Improve the operating economy of the unit. In terms of tapping energy saving potential and reducing production costs, we focus on reducing coal consumption for power generation and comprehensive plant power consumption rate, and carry out small indicator competitions between operating values. Assessment indicators are analyzed, rewarded, punished and cashed out every month, fully mobilizing employees. work enthusiasm.

In the management of coal burning, a management organization with the factory director as the center has been established, and comrades with strong sense of responsibility are responsible for the management. During operation, multiple employees are arranged to work shifts to sample and inspect coal. Through the inspection of coal burning The supervision and management of transportation, factory entry, storage and other links have further reduced the cost of coal burning, improved the quality of coal burning, and severely cracked down on adulteration and counterfeiting.

4. Strictly pay attention to the installation quality, ensure the construction period, and work overtime to carry out the expansion

This expansion task is heavy and the construction period is tight. All our employees work overtime, starting at 7 a.m. and only at noon. Leave an hour for meals and get off work at 7pm. Although the working hours are longer, all employees have no complaints in order for our ultra-high voltage unit to generate electricity as soon as possible.

Unit 4# is the first ultra-high-pressure unit in our group. Most people have never been exposed to it. In order to ensure the quality of installation, we encountered difficulties and needed to go through repeated research, discussion, collection of relevant technical information, and implementation Please come in and go out, contact and communicate closely with the equipment manufacturer, and humbly ask for advice on various problems encountered during the installation process. The director of the maintenance workshop reasonably arranged manpower and material resources, and overcame difficulties such as small personnel, heavy tasks, and tight projects. The installation work was done in an orderly manner without any chaos. He made installation plans every week and carefully checked the completion status, creating a smooth completion for the 4# machine. In good condition.

The installation of the main body, from the basic pads to the positioning of the high and low pressure outer cylinders, the high and low pressure inner cylinders, the positioning and debugging of the bearing box, and the production of the medium pressure steam valve steel frame, was achieved after repeated research and experiments. Intended technical requirements for use. During the installation process of machine #4, the principle of "Three Simultaneities" was fully reflected, that is, "simultaneous design, simultaneous construction, and simultaneous use." While the steam turbine is being installed, the production and installation work of the 5# boiler is also going on intensely. Furnace repair and chemical repair workshops produce self-made parts for various boiler equipment. The boiler body is installed by an installation company. The furnace repair workshop is responsible for the installation of boiler auxiliary engines. A large amount of work such as coal grinders, fans, and ancillary pipes is pressed in the workshop. Some 30 people. In particular, the installation of the coal mill was even more difficult. The coal mill is one of the heaviest equipment among the boiler auxiliary equipment. Because the equipment arrived late, the boiler steel frame had already been hoisted, and large mechanical equipment was needed to move the coal mill into place. It was no longer possible, so the workshop staff had to adopt primitive methods, with civil engineering crews paving the road, placing sleepers on the roadbed, and using reverse chains to drag the coal mill into place bit by bit. Seeing the rumbling sound of such a large piece of equipment, the construction worker took a long breath and smiled knowingly. At the same time, the director of the electrical repair shop also successfully completed the expansion of unit 4 despite a small staff and a large workload. The cable laying, installation and debugging of electrical equipment all left behind the hard work of the employees. What makes us even more proud is that the director of the thermal workshop, with more than 10 people on hand, took the lead to go deep into the site and overcompleted the expansion of the unit while ensuring the normal operation of the four furnaces and three machines. "A century-old plan, quality first " is the motto of each of our employees. It can increase speed while ensuring quality. This is the characteristic of our entire installation work. There are basically no holidays or rest days. There is only one goal, which is to make the 5# furnace and 4# machine The earlier it is put into operation, the earlier it can generate electricity. In December, after the hard work of all the cadres and workers of the factory, the entire expansion project was basically completed, and the furnace lighting, pipe blowing and restoration work were completed in one go. There was no casualty during the entire expansion process, which was highly praised by the group leaders.

Dear leaders and colleagues, 20__ is not only a year full of hope for our company, but also an extremely critical year for accelerating development. We must continue to follow the group's policy of innovating and tapping potential, being brave in innovation, saving energy and reducing consumption, further strengthen basic management, strictly control production indicators and the use of spare parts, and minimize the use of consumable materials; improve the decision-making and execution capabilities of managers, Once again, we will increase the intensity of employee skills training to improve the overall quality of all employees; we will also do a good job in the expansion of unit 5 to ensure the completion of the group's power generation task by the end of June.

5 general related articles on personal work summaries of power plant employees:

★ 5 personal work summaries of employees

★ 2021 personal annual work summaries of power plant employees

★ General personal year-end work summary (selected 12 articles)

★ Personal work summary of power plant employees

★ 5 latest personal year-end work summaries of power plant employees in 2020

p>

★ Five selected works of the latest electric power employee work summary

★ Personal summary report of electric power employees

★ Five selected personal work summary examples of power plant technology

★ The latest 5 examples of personal work summary in power plants

★ The latest 5 personal year-end work summaries in power plants