Four self-inspection reports for construction units

#report# Introduction The textual expressions in the self-examination report must be realistic and realistic. They must affirm the achievements but cannot make false statements or exaggerate. All matters that are explained by data must be true and accurate. The following is a self-inspection report compiled by the construction unit. Welcome to read it!

Self-inspection report of the construction unit

Insurance City-Century Oasis Garden Lakeview Pavilion, Coconut View Pavilion and basement project 72306.46m, frame shear wall structure/17 floors above ground , two floors underground, prefabricated pile foundation and manually dug pile foundation. It is newly built by Dongguan Houjie Real Estate Company, Dongguan Jinxian Real Estate Development Co., Ltd., designed by Beijing China Construction Planning and Design Institute, supervised by Guangdong Construction Engineering Supervision Co., Ltd., and constructed by Dongguan Nanyue Construction Engineering Co., Ltd. Construction started in June 2007 and was completed in October 2009.

From the start of the project to the completion, our construction unit strictly controls the quality of the building materials. All materials have been inspected and passed the inspection. They are only allowed to enter the site for use after Party A supervises and authenticates them. The foundation, main columns, and floor panels have dedicated personnel to cooperate with the construction personnel for inspection, and quality supervision, design, and supervision personnel are invited to the site for supervision and inspection. Basically, they can meet the requirements of the design and specifications. In terms of decoration, the flatness of the floor and the verticality and flatness of the wall were carefully controlled to avoid hollowing out in this project.

After the completion of the project, our company has specialized personnel to conduct a visual inspection of the unit project, that is, the outdoor wall, the horizontal and vertical angles of the outer wall, the drainage slope, the steps, the open ditch, the drip line, and the deformation joint. , downspouts, roof slope, roof details, roof protective layer, indoor ceiling, indoor walls, ground and floor surfaces, stair treads, toilet baths, balcony flashing, fine wood, guardrails, door and window installation, glass, paint, etc. Specify requirements.

Part 2 Construction Unit Self-Inspection Report

In order to conscientiously implement the spirit of the video and telephone conference of the Ministry of Housing and Urban-Rural Development on rectifying and standardizing the order of the construction market, implement the municipal government's "About Comprehensive Standardization of the City" The Opinions on Further Strengthening the Quality and Safety Management of Construction Projects in the Construction Market" and the "Implementation Plan for Comprehensive Law Enforcement Inspection of the ** District to Rectify and Standardize the Construction Market". Our unit immediately convened relevant personnel to publicize and implement the spirit of the meeting, and established a project safety and quality management leading group.

1. Establish a leading group for safety and quality management of future science and technology city municipal projects

Team leader: xx

Deputy team leader: xxxx

Team members: xxx, xxx, xxx and project managers of each bid section, chief management engineer. Attached is the group list and contact information.

Job Responsibilities: Responsible for implementing self-inspection and self-rectification of self-management projects, organizing joint inspections to spot-check and evaluate self-inspection and self-rectification, comprehensively rectifying illegal and illegal measures, and actively cooperating to do a good job This special governance work will take this as an opportunity to establish a long-term supervision and inspection mechanism.

2. Clarify the key inspection and rectification contents

1. Whether the environmental protection, safety, quality and other requirements of the construction contract are implemented.

2. Whether a safety and quality management assurance system, an environmental protection management system and green construction assurance measures have been established at the construction site.

3. Whether the construction organization design includes effective measures to prevent dust, noise, solid waste and wastewater from polluting the environment.

4. Whether environmental protection funds are earmarked for special use.

5. Whether managers and workers are trained and assessed on environmental protection laws and regulations and civilized construction.

6. Whether there are "five signs and one picture" and supervision telephone numbers at the construction site, and whether there are environmental protection slogans.

7. Whether the on-site materials are classified and stacked neatly, and whether the material labels are clear and accurate, etc.

8. Whether the dust generated by on-site construction is managed. Whether the earthmoving transport vehicles are covered tightly and whether they are cleaned in a timely manner, etc.

9. Whether the safety officers are certified to work and meet the number requirements.

10. Implement the project chief supervisory engineer responsibility system, equip sufficient and professional supervisory personnel, and carry out supervision work in strict accordance with supervision procedures.

11. Whether the supervision engineer conducts timely and in-place supervision and inspection in accordance with the requirements of the project supervision specifications, using various forms such as standing by, inspecting, and parallel inspections.

Part 3 Construction Unit Self-Inspection Report

In order to further improve flood prevention work, ensure safe passage through the flood season, protect the lives and property safety of the people in our town, and maintain normal production order, Maintain social stability. According to the spirit of the meeting of the Chongqing Flood Control and Drought Relief Headquarters and the requirements of Bi Flood [XX] No. 3 document, our town was personally led by the mayor Zhou Liang from March 20 to April 1 to form a pre-flood safety inspection team to conduct A large-scale inspection was carried out on the current status of water conservancy projects, river barriers, emergency material management, reservoir operations, river-related construction projects, etc. within the jurisdiction of Dalu Town, and the hidden dangers and phenomena identified were registered and documented. The time and requirements for rectification have been put forward, and the self-inspection situation is now reported as follows:

1. Firmly establish the idea of ??preventing major floods and rescuing major disasters

Due to the floods in recent years , causing great economic losses to our town. Therefore, we have established the idea of ??putting people first, building a harmonious society, ensuring the safety of one party, and do a solid job in this year's flood prevention work.

2. Strengthen leadership and implement responsibilities

According to the requirements of the document, our town has established a leading group for flood control and drought relief, with the mayor as the leader, the deputy mayor, and the deputy director of agriculture. The secretary is the deputy team leader, and relevant personnel from the Agricultural Office and Agricultural Service Center are members. They are responsible for flood prevention and control of important reservoirs, mountain ponds, stone river weirs, and dangerous sections of rivers within the jurisdiction, and are responsible for supervising and urging the implementation of water conservancy projects formulated by relevant units. plan, establish a flood control duty system, form a flood control and rescue team and reserve flood control materials, and be responsible for emergency and disaster relief work within the jurisdiction.

3. Implementation of the flood season duty system

4. Safety inspection before the flood

After inspection, first, there were pear trees on the reservoir under renovation in Dalu Town; second, The Yanwodang Reservoir's culvert was blocked due to the construction of the Chongqing-Sui Expressway; third, the Shihe Weir in Manaozui, Shidao, was blocked due to the construction of the Chongqing-Sui Expressway. No other safety hazards were found.

We are actively dealing with the pear trees on the anti-reconstruction reservoir. Regarding the culvert blockage and river blockage caused by highway construction in Yanwotang Reservoir and Shidao Manaozui Shiheyan, it is recommended that the superior department coordinate solve.

Part 4 Self-examination Report of Construction Unit

1. Implementation of Safety Production Responsibility System

In order to clarify responsibilities, a company manager was established as the team leader and in charge The deputy safety manager is the deputy team leader, and the safety production leading group is composed of project managers and full-time safety officers. We establish the concept of "people-oriented, safety first" in our work, and put forward the requirement for managers of each project department that "to manage production, we must manage safety, and to manage safety, we must understand production." Each project department is equipped with full-time safety officers, and has formulated a safety production position responsibility system suitable for the characteristics of the project department. The safety production responsibility system has been decomposed layer by layer, and the responsible entities have been strictly implemented to truly achieve clear responsibilities and assign responsibilities to each person. , each perform their duties to ensure the smooth development of safe production.

2. Inspection situation

1. Implementation of the safety production responsibility system and various safety management systems of each project department;

2. Construction site safety protection Implementation of facilities;

3. Implementation of construction fire prevention, heatstroke prevention and other safety measures;

4. Vertical transportation equipment, scaffolding, construction electricity, formwork support and The situation of special safety rectification such as the protection of "Three Treasures and Four Ports";

5. Whether the safety information at the construction site is complete and standardized, the implementation of rectification of safety hazards and the closure of cases;

6. Various types of safety management Personnel and special operations personnel holding certificates to work.

This time we mainly inspected the xxx project department, xxx project department, xxx project department, etc. The inspection showed that the awareness of production safety in each project department has been greatly improved, and the safety management work at the construction site has been strengthened. The safety production responsibility system and various safety management systems can be conscientiously implemented, full-time safety officers are equipped, and safety management materials are gradually standardized. , the "five signs and one map" at the construction site can basically be set in place, and closed construction can basically be achieved.

It is worth mentioning that our xxx project department can firmly establish the awareness of "quality first, safety production is more important than Mount Tai" and actively carry out the creation activities of "Safety and Quality Standardization Demonstration Project", and its safety The management level of production and civilized construction has been continuously enhanced, and has been well received by the owner department.

3. Existing problems

1. Ideological education: Some employees are lax and paralyzed about safety work, have a paralyzed mentality that accidents have nothing to do with me, violate labor discipline at work, and have fluke psychology.

2. Safety information: A few project departments failed to collect and organize the information in accordance with the company's construction site safety management measures, and the special safety construction plan and safety technical information were incomplete.

3. Civilized construction: Materials at some construction sites are piled up in a disorderly manner, warning signs are hung in inappropriate locations, and fire-fighting equipment is not properly arranged.

4. Scaffolding: The material of the scaffolding at a few construction sites is poor, the sweeping poles and scissor supports are not tied in place, and the scaffolding boards are not fully laid in place as required.

5. "Three treasures, four mouths" protection: Very few workers at the construction site did not wear safety helmets.

6. Construction electricity: The on-site power distribution box of some project departments is damaged and has no lock, and the power wires are not properly connected.

IV. Handling Opinions

For the project department that failed to comply with the company's construction safety production standardization during this safety inspection, rectification and implementation will be implemented as required, and criticism and punishment will be notified. The company's management system imposes penalties.

V. Next-stage work

1. All project departments are required to firmly establish the policy of “safety first, prevention first, comprehensive management”, strengthen leadership, and enhance their own sense of safety responsibility , and truly implement safe production.

2. Carefully study laws, regulations and relevant provisions, further implement the safety responsibility system at all levels, do a good job in safety disclosure of each project, strictly implement safety operating procedures, and increase safety production education and training for workers , to further improve the standardization of safety management information.

3. Increase self-examination and self-correction on construction sites, strictly implement the system of holding certificates for safety management personnel and special operations personnel, widely carry out safety production publicity and education for construction personnel, and further improve the safety awareness of construction personnel.

4. Establish and implement a work-related injury insurance system. Each project department must apply for work-related injury insurance for employees, organically combine work insurance with construction safety management, and further improve the safety of employees.

5. Focus on key points, continue to deepen the special rectification of hidden dangers of production safety accidents, and further promote safety standardized on-site management. Organize safety inspections on a regular basis, with one inspection per month and one inspection per quarter, and effectively strengthen on-site inspections to nip potential accident risks in the bud.