How to DIY tissue box DIY solution

Make storage boxes out of empty cartons

Preparation materials: all kinds of empty cartons (such as canned food, moon cakes, biscuit boxes, toothpaste boxes, etc.). ), patterned wrapping paper, English newspaper, cardboard (used to increase the thickness inside).

A. The storage box made of cardboard boxes is just the right size for storing old tapes and other sundries.

B, a long toothpaste box, packed in English newspaper, can be used as a pen box with an inner box. Sewing buttons and sealing lines at the opening is a good sealing method.

C, add two drawers to a rectangular paper box, and make a jewelry box with a long box of cosmetics as the inner box, which can accommodate earrings, necklaces and other small accessories.

D, three empty aluminum foil bags are cut open, cleaned, dried and pasted together, and can be placed on the desktop as a pencil case. .

The unique jewelry box is handmade.

The unique jewelry box looks very creative and exquisite. Its predecessor is just a finished milk box!

Preparation materials: small milk box, beautiful wrapping paper, a small piece of paper rattan, pearl board, corrugated board.

1, cut the milk bottle mouth, and fold the four sides of the milk box into the above shape under pressure.

2. Cut the favorite wrapping paper into long strips and stick them on both sides.

3. Draw the size of the box mouth and cut out a square box.

4. The thickness of the pearl plate in the box cover.

Empty cans of potato chips are used to make storage cans and multifunctional pen holders.

Materials needed to make this pen container: empty cans of potato chips and colored wrapping paper.

A the bottom of the upper half with plastic cover is sealed and decorated, which is an elegant storage tank.

B, the lower part was originally a complete cylindrical jar, just need to wrap it, that is, it became a pen container.

Hand-made vertical bookshelf

Keep the original shape of milk cartons and stack them into a vertical shelf.

Materials needed for DIY production:

4 long milk cartons, wrapping paper and photo glue.

1. First, remove the bottom of the milk carton as the basic part of the shelf.

2. Cut the milk carton obliquely and fold it into a triangle, as shown in the figure.

3. As the base of the shelf, the finished triangle can make the whole body slightly inclined upward, which is convenient for storing articles and not scattering.

4. After the bottom seat and the three basic shapes are packaged, stack and glue them one by one, and you're done.

Produce creative CD stands with natural and original flavor.

Materials to be prepared for making this creative work:

A waste paper box composed of corrugated cardboard (if the thickness is not enough, you can use two layers or add one layer of cardboard to increase the firmness) and branches.

Manual production method:

Cut the corrugated cardboard with a width of about 37.5px on both sides at equal intervals, then insert branches to adjust the angle, and the CD rack can be completed.

Insert the CD horizontally into the notches on both sides, and put the album name outward for easy searching.

Handmade bookshelf

It looks good to make a unique and practical manual book and newspaper rack with these abandoned empty cartons and cartons!

Handmade materials to be prepared:

Cartons or cartons (about the size of magazines, books and newspapers), calendars and English newspapers (for packaging)

1, cut out a simple and generous shape, paste it on English newspaper packaging, and it becomes a practical book and newspaper rack full of books.

2. On the diagonal of the carton, cut it into a fan-shaped arc, add recycled paper materials such as calendar paper, and after a little decoration, a durable and environmentally friendly book and newspaper folder is completed.

Hand-made colorful and childlike animal storage boxes and lockers.

Materials needed to make this storage box: discarded cartons and decorative paper.

1, the original waste paper box, it is best to choose a rectangular and thick one.

2. Cut and fold the paper box into a trapezoid as the basic structure of the lion.

Add the lion's face, cut and paste it with paper, and outline the shape of the lion, and you can complete the work.

What the box looks like when it is opened.

You can also design a favorite animal model and create a lovely animal storage box.

Manufacturing method of environment-friendly gift box

The following is a very economical and environmentally friendly gift box.

Preparation materials:

Milk carton (long or small), wrapping paper, glue (or double-sided tape).

1. After removing the bottle mouth as shown in the line draft, draw a dotted line on the milk box.

2. Use a ruler to assist the blade and gently draw a crease on the broken line.

3, according to the original cut crease, pinch off the bevel.

4. After folding the four oblique angles, fix them by rotating.

5. Spread the paper with your fingers and sort out the shape of the petals.

6. The folded shape is as shown in the figure, but it has not been completed until now. The purpose is just to fix the crease first, so that the shape can be easily folded after packaging and the shell will not wrinkle.

7. Unfold the original folded shape, stick it on the surface with wrapping paper, and reserve about 100px up and down.

8. Cut the opening into four pieces and fold it into a flat sticker.

9. Fold the backing paper according to the general way of packaging gift boxes, and then fold it again according to the original folding method, and you can fold a beautiful gift box.