What are the on-site environmental protection measures?

1. Protective measures to prevent air pollution:

1) The roads in the site are all hardened pavements, and the concrete pavements inside and outside the gate of the construction site are hardened within 15m, and special personnel are assigned to clean and sprinkle water to reduce dust.

2) Set up a brick-enclosed construction waste station of 10 square meter and a brick-enclosed domestic waste station of 5 square meters at the construction site, and regularly clean up the outbound construction waste.

3) Cancel the boiler and tea stove on site and replace them with electric heating and liquefied petroleum gas kitchen equipment; All motor vehicles must have exhaust emission certificates to meet the standards stably and prevent noise pollution.

4) When loading, unloading and transporting fine-grained materials on the construction site, effective measures such as covering must be taken to put them in storage, and when the vehicle leaves the site, it should be ensured that muck is not left behind.

5) In the building decoration stage, the waste bamboo woven board is used to build a closed garbage passage.

2. Protective measures to prevent water pollution:

1) The oil depot and paint depot set on the construction site shall be waterproof; Capacity should be impermeable and leak-free; When placed outdoors, it should also be treated for leakage prevention, and it is not allowed to be misplaced.

2) The on-site canteen shall be provided with grease traps according to the requirements of the Group for oil separation and pollution prevention.

3. Protective measures to prevent noise pollution:

1) Observe the construction time according to the requirements of Beijing to prevent noise from disturbing people.

2) Take effective measures to reduce the noise frequency of various mechanical noises used in the construction site, with the noise frequency not exceeding 55 dB at night and 70 dB during the day.

3) Turn off the noisy machinery.

Legal basis:

Regulations on environmental protection management of construction projects

Article 1 These Regulations are formulated for the purpose of preventing construction projects from generating new pollution and damaging the ecological environment.

Article 2 These Regulations shall apply to construction projects that have an impact on the environment in People's Republic of China (PRC) and other sea areas under the jurisdiction of People's Republic of China (PRC).

Article 3 Construction projects that produce pollution must meet the national and local pollutant discharge standards; The areas where total emission control of key pollutants is implemented must also meet the requirements of total emission control of key pollutants.

Article 4 Industrial construction projects shall adopt clean production technology with low energy consumption and material consumption and less pollutant production, make rational use of natural resources and prevent environmental pollution and ecological damage.

Fifth renovation, expansion projects and technical transformation projects must take measures to control the original environmental pollution and ecological damage related to the project.