How to vaccinate a puppy yourself?

1, red bottle is diluent, blue bottle is vaccine, and the storage condition of vaccine is 2-8 degrees Celsius.

2. Prepare alcohol for injection, medical cotton and disposable syringes.

3. Pour the alcohol into a clean container.

4. Tear the medical cotton into proper size and put it in a container filled with alcohol.

5. First disinfect the bottle mouth of the red bottle diluent with alcohol to let the alcohol evaporate (the same is true for the blue bottle).

6. Use a syringe to extract diluent from the red bottle.

7. Remove the anti-counterfeiting label of the blue bottle (vaccine).

8. Pump the diluted liquid from the syringe into the blue bottle (vaccine).

9. Shake well by hand.

10, shake well and draw out. Push the air upward with a needle, and the air can be discharged with a flick of your hand.

1 1, it is better to see the liquid being pushed out.

12. First, apply alcohol to the part where the dog wants to inject (I usually inject it subcutaneously at the back of the neck), but I can't inject it immediately, so I can only wait for the alcohol to evaporate.

13. Set the dog up, lift the skin at the injection site with one hand, and inject the needle parallel to the body with the other hand (this method will not hurt the dog).

14, press the needle with a dry cotton ball after playing, and you're done.

The first injection: 2 doses, used to prevent canine distemper and parvovirus.

The second injection: 5 injections to prevent canine distemper, parvovirus, infectious hepatitis, canine adenovirus and canine parainfluenza (the second injection should be given at least one week after the first injection).

The third needle: 6 needles 1 needle+rabies 1 needle, or 7 needles directly. The 7-joint is 6-joint plus rabies (call again 20-30 days after the second injection). ?