How to typeset word

1. You can set up landscape printing in the print preview of word. First, click the button in the upper left corner, and then select Print Preview in Print.

2. In the print preview, click Paper Direction-Landscape, and then you can print in landscape.

Extended data:

Notebook maintenance principles:

* When the computer is not used for a long time, just temporarily turn off the power of the LCD screen through the function keys on the keyboard, which can save electricity and prolong the life of the screen.

* Please do not forcibly cover the upper cover of LCD screen or put any foreign matter between the keyboard and the display screen, so as not to damage the internal components due to heavy pressure on the upper cover glass.

* Don't touch the screen surface with nails and sharp objects (hard objects) to avoid scratches.

* LCD screen surface will absorb dust due to static electricity. It is recommended to buy a special rag for LCD screen to clean the screen. Don't pat with your fingers to avoid leaving fingerprints, please wipe gently.

* Don't use chemical cleaner to wipe the screen.

battery

* When there is no external power supply, if the card in the PCMCIA slot is not used at that time, it is recommended to take out the card first to extend the battery life.

* Room temperature (20-30 degrees) is the most suitable working temperature of the battery, and the working environment with too high or too low temperature will reduce the service life of the battery.

* It is incorrect to take out the battery to extend the battery life when using the notebook computer in an environment where a stable power supply can be provided. As far as ASUS notebook computer is concerned, when the battery is low, the charging circuit in the battery will automatically turn off, so it will not be overcharged.

* It is recommended to calibrate the battery charge once every three months on average.

* When using the AC adapter, please refer to the international voltage instructions. "

{ad} keyboard

* When dust accumulates, you can use a small brush to clean the gap, or use a high-pressure spray tank that is usually used to clean the camera lens to blow out dust, or use a hand-held vacuum cleaner to remove dust and debris from the keyboard.

* Clean the surface. You can dip a little detergent on the soft cloth and gently wipe the keyboard surface after turning off the phone.

hard disc

* Try to use the computer under stable conditions and avoid operating the computer in places that are prone to vibration.

* Power-on and power-off process is the most vulnerable time of hard disk. At this time, the rotation speed of the hard disk bearing is not stable, and if vibration occurs, it is easy to cause track defects. Therefore, it is recommended to wait about ten seconds after turning off the computer before moving the laptop.

* Perform disk reorganization and scanning once a month on average to improve the efficiency of disk access.

Touch screen device

* Please keep your hands clean when using the touchpad to avoid the cursor moving around.

* When the surface gets dirty accidentally, you can gently wipe the surface of the touchpad with the wet corner of a dry cloth. Don't wipe the surface with rough cloth and other objects.

* Touch screen is an inductive precision electronic component. Please don't use sharp objects to write on the touch screen, and don't use them under heavy pressure to avoid damage.

heat dissipation

* Generally speaking, notebook computer manufacturers will use fans, heat pipes, large radiators and vents to reduce the high temperature in use.

* In order to save electricity and avoid noise, the fan of the notebook computer will not run all the time, but will only start when the CPU reaches a certain temperature.

* Placing the laptop on soft objects, such as beds and sofas, may block the cooling holes and affect the cooling effect, thus reducing the operating efficiency and even leading to a crash.