Tianjin heating fee charging standard

Tianjin heating fee collection standard is:

The basic heating price for residents is 7.5 yuan per square meter, and the metered heating price is 0. 13 yuan per kwh.

The charging standard of heating fee is mainly determined by the following aspects:

1. Area charge: The charging standard of heating fee in Tianjin usually adopts the method of charging according to the building area, that is, the charging amount is determined according to the actual use area of the house. Different types of houses, such as residential buildings, commercial buildings and office buildings, may have different charging standards.

2. Proportion: In the case of multiple households using a heating system, the charging standard of heating fee will also consider the proportion of each unit or individual. Usually, the distribution ratio is determined according to the use area of each unit or individual.

3. Seasonal factors: Due to the great climate change in Tianjin, the charging standard of heating fees will also consider seasonal factors. Generally speaking, the heating cost will be higher in winter, but it will be lower or free in summer.

Calculation method of heating area:

1. The heating area of a residential building is equal to the building area (property area) of the heating house, minus the areas with balcony partition (excluding storage room), unheated kang house, unheated stairwell and pipe room.

2. Generally speaking, the heating area of commercial users, government agencies, enterprises and institutions, schools and social groups is calculated according to the construction area of hot buildings.

3. If the floor height of the heating building is higher than 3m, an additional charge will be charged, that is, every time it exceeds 0.2m (if it exceeds less than 0.2m, it will be calculated as 0.2m), the heating area will also be calculated as an increase of 10%.

4. The calculation method of heating area of sloping roof building is as follows: Generally speaking, the space between the lower surface of the roof and the ground with a clear height less than 1.2m is not included in the heating area, while the space with a clear height of 1.2m-2.2m is calculated as 1/2 of the projected area, and all the spaces with a clear height greater than 2.2m are included in the heating area.

5. Any unheated room with a heating pipe diameter exceeding 80mm (80mm) shall be calculated as a heated room, and the calculation method of heating area is the same as that in the introduction.

Tianjin heating fee payment methods and preferential policies mainly include the following ways. First of all, residents can choose to pay the heating fee monthly, and settle accounts according to the actual usage of each month. Secondly, residents can also choose to pay the annual heating fee in one lump sum and enjoy a certain discount. In addition, Tianjin has also stipulated the way of paying heating fees in advance, so that residents can pay a certain amount of heating fees in advance to ensure continuous heating in the heating season. Regarding preferential policies, Tianjin has provided heating fee reduction or subsidy policies for low-income families and groups with special difficulties to ensure that they can enjoy heating services normally. In addition, Tianjin also encourages residents to save energy and reduce emissions, and adopts measures such as strengthening heat preservation measures and using energy-efficient heating equipment to reduce heating costs.

To sum up, Tianjin provides diversified heating payment methods and preferential policies to meet the different needs of residents and promote the development of energy conservation and emission reduction.

Legal basis:

Interim Measures for the Administration of Urban Heating Price

Article 4

Heating units and heat users shall sign a heat metering contract for supply and demand, and stipulate the rights and obligations of both parties.

Article 5

Heating units shall inform heat users of heat, heating fee settlement, daily maintenance and troubleshooting of heat meters, and do a good job in publicity and explanation.

Article 6

Heating metering includes direct metering and indirect apportionment metering. The household heat meter for direct measurement and the metering sharing device for indirect measurement shall conform to the national, industrial and local standards of this Municipality.