What is the safe operation procedure of loader?

Safe operating procedures for loaders:

1. Before driving and working, the operator should be familiar with the performance, structure, technical maintenance and operation methods of the loader and operate according to the regulations.

2. Prevent the bucket from hitting the trunk, and it is forbidden to cross the bucket from the top of the cab.

3, don't step on the clutch pedal, in case of cut off the power supply accident.

4. When it is found that the brake fails due to flooding, brake continuously, and use heat to eliminate the moisture in the brake pad, so that the brake can return to normal.

5. No one is allowed to stand in front, and the bucket is not allowed to be manned during driving.

6. Keep the machine clean and fasten loose parts to prevent parts from being worn or lost due to looseness.

7. If there is any abnormality, stop the machine in time to eliminate it. If the reason is not found, stop the operation before the fault is eliminated.

Extended data:

Use of loader in running-in period;

1, fast wear speed Due to the influence of processing, assembly and adjustment of new machine parts, the friction surface is rough, the contact area of the mating surface is small, and the bearing condition of the surface is uneven.

2. Poor lubrication Because the fit clearance of newly assembled parts is small, and due to assembly and other reasons, it is difficult to ensure the uniformity of the fit clearance, and it is difficult for lubricating oil (grease) to form a uniform oil film on the friction surface to prevent wear.

3. The newly processed and assembled parts are loose, and there are deviations in geometric shape and fit size.

4. Operation errors are mostly due to insufficient understanding of the structure and performance of the machine, and it is easy to cause failures and mechanical accidents due to operation errors.

Baidu encyclopedia-loader