How to solve the problem of dripping faucets?

The dripping faucet may be caused by loose contact parts. You can use raw material tape to tighten it. The specific operations are as follows:

1. Turn off the water valve at home first to prevent the water from flowing too much. As shown in the picture.

2. Then use a wrench to turn the faucet counterclockwise, as shown in the picture.

3. Then wrap the raw material tape around the faucet in the forward direction for about 15 times, not too much but not too little. It can be determined according to the actual situation.

4. After winding, align the head with the hole and twist it slowly. When twisting becomes difficult, twist it straight instead of twisting.

Notes

When turning the faucet with a wrench, try to go as slowly as possible to prevent the faucet from breaking inside for a long time.