Seek the management system of power plant operation safety management.

Power plant rules and regulations system

Working ticket system of ten prohibitions on safety in production in workers' safety production convention

Handover system equipment inspection system inspection system equipment maintenance system

Equipment defect management system spare parts management system equipment rating system material warehouse fire protection system

Safety education system, health system, safety reward and punishment system and bonus distribution system.

Labor discipline reward and punishment system, accident statistical investigation system, operation analysis system

Safety reward and punishment system

1. Those who find major hidden dangers of accidents will be rewarded with 50- 100 yuan depending on the circumstances.

2. Reward 30-50 yuan to those who can eliminate hidden dangers of accidents in time and restore normal operation of equipment.

3. Reward those who put forward reasonable suggestions and are adopted. 30-50 yuan.

4. If the patrol is not careful and the accident or fault is not eliminated in time, the responsible person will be fined 50- 100 yuan, and those with unclear responsibilities will be fined 50- 100 yuan, and the monitor will be doubled.

5. Accidents or other safety accidents caused by responsibilities shall be implemented in accordance with the provisions on safety responsibilities.

Convention on workers' safety in production

1. Keep in mind that "everyone is responsible for safety in production", establish the idea of "safety first", actively participate in safety production competitions, receive safety education and improve self-protection knowledge.

2. Seriously study and master the safety operation rules and relevant safety knowledge of each type of work, actively participate in the training of new types of work and new workers, strive to improve safety technology, consciously abide by the various systems of safety production, obey the command of the safety officer, and do not operate illegally or take risks recklessly.

3. Use and take good care of protective equipment and safety facilities correctly, obey the distribution, stick to the post, strictly abide by the operating rules, and do not start the mechanical and electrical equipment used by others casually, and do not operate special types of work without a license.

4. Regularly check the working environment and tools used, do a good job in civilized construction, immediately report the accident or near accident step by step, analyze the accident and put forward reasonable suggestions.

5. Employees have the right to report all safety production situations. No one shall obstruct, strike, retaliate or suppress.

6. Employees have the right to refuse illegal command.

Ten prohibitions on safe production

1. Do not drink during working hours.

2. Do not wear your seat belt, and it is forbidden to work high above the ground.

3. It is forbidden to enter the aerial work site without wearing a helmet.

4. It is forbidden to operate without operation ticket.

5. It is forbidden to work on electrical equipment without working ticket (or verbal command).

6. It is forbidden to work on power-off equipment without electricity inspection and grounding.

7. It is forbidden to stop sending during the appointment.

8. Without training and examination, without obtaining the certificate, it is forbidden to work alone.

9. It is forbidden to work alone on electrical equipment without a guardian.

10. It is forbidden to command illegal operations in violation of regulations.

Operation ticket system

1. The switching operation must be carried out according to the monitor's command, and it should be repeated correctly. The issued command shall accurately and clearly use formal operating terms and dual names of equipment.

2. The operation ticket shall be filled in by the operator and reviewed by the guardian. The reviewed operation ticket shall be supervised by the guardian and rehearsed on the simulation board. After confirmation, both parties shall jointly sign.

3. The operation ticket must be filled in with a pen or an oily pen, with clear handwriting, and shall not be altered at will.

4. Switching operation must be carried out by two people, among whom the guardian is the one with higher technology. Operations must be performed in sequence, and jumping or missing items are not allowed.

5. The operator reads each item in sequence, and the operator must repeat it. The guardian checks the repetition and operation items, and the equipment labels are completely consistent. Only when the "Execute" command is issued can the operator execute it.

6. After each operation, the guardian marks "∨" before the serial number with a red pen, and then operates the next item. After the whole operation, the guardian shall affix the seal of [executed] and keep it for one year.

7. During operation, the start and end time and related stop time must be recorded.

8. Stop the power transmission operation, and it is forbidden to switch the knife with load. Operators must wear insulating gloves, insulating boots and insulating rods in rainy days.

Rain cover, it is forbidden to switch during thunderstorm. When operating, it should be carried out in strict accordance with the electrical safety work procedures.

Working ticket system

1. When working on electrical equipment, work tickets should be used. Work on high-voltage equipment needs to be completely or partially cut off; In a low-voltage system or secondary

When working on the loop, when the high-voltage equipment needs power failure or the safety distance is not enough, all those who need high-voltage power failure will use the first working ticket.

2. Live working and working on the shell with equipment, and working on the secondary circuit without high voltage power failure; On a high-voltage charged conductor

Put ... to the test; The second working ticket is used for low-voltage distribution boards, boxes and low-voltage lines.

3. The working ticket shall be issued by a special person in duplicate. The working ticket shall be filled in by the person in charge of the work, and the working ticket number, work task and license shall be indicated.

Working time and completion time shall be correct and clear, and shall not be altered at will.

4. The person in charge of the work (guardian) should organize the work correctly and safely, conduct safety education in combination with the actual situation, and supervise and guide the work.

Personnel shall abide by the electrical safety regulations, and be responsible for checking whether the safety regulations in the working ticket are correct and complete, and the safety work done by the personnel on duty.

Whether the measures are in line with the actual situation on site. Explain safety matters to employees before work.

5. The work permit holder is responsible for checking whether the safety measures listed in the work permit are correct and complete, and whether they meet the site conditions and the layout of the work site.

Whether the safety measures are perfect, and be responsible for checking whether the power-off equipment is in danger of sudden call.

rotation/relay system

1. The personnel on duty shall not be absent without leave before completing the handover procedures.

2. Handling accidents or switching operations, are not allowed to shift. If an accident occurs during the handover, the handover will be stopped and the successor will hand over.

Member processing, successor in succession under the command of the monitor to assist in the work.

Three. The contents of the succession should generally be:

1. system and the operation mode of our factory;

2. Operation and change of protection and automatic devices;

3. Equipment abnormality, accident treatment and defect treatment;

4. Switching operation and unfinished operation instructions;

5. Equipment maintenance, testing, arrangement of safety measures, number, number and location of grounding wires and working conditions in execution;

Four. After the handover, the shift supervisors of both parties shall sign the operation records.

Equipment inspection system

1. Patrol inspection of equipment is an important means to master the running state of equipment, find and eliminate hidden dangers in time and ensure safe operation.

The main links in the operation must be careful and meticulous.

2. The personnel on duty should regularly patrol all operating and standby equipment and the surrounding environment, and ensure that the patrol interval does not exceed 1 hour.

3. In the following cases, the patrol time and frequency shall be decided by the shift supervisor:

(1). When the equipment overload does not increase significantly;

(2) When the newly installed, long-term disabled or overhauled equipment is put into operation;

(3) When there are defects and suspicious phenomena affecting the safe operation of the equipment;

(4). In case of strong winds, thunderstorms, dense fog, freezing and other weather changes;

(5) Strengthen inspection according to the instructions of leaders;

4. After the patrol, the found defects should be recorded in the Equipment Defect Record Book, and major equipment defects should be reported to the leaders in time.

5. If any serious threat to personal and equipment safety is found during the patrol, it shall be handled according to the relevant regulations on accident handling.

Patrol inspection system

1. The personnel on duty shall patrol according to the specified time and route.

2. After the patrol, the personnel on duty should make records.

3. In case of the following circumstances, the number of inspections should be increased;

(1). The equipment is overloaded or the load is obviously overtime.

(2) Equipment is put into operation again after overhaul or long-term outage; The newly installed equipment is put into operation in the system.

(3) Equipment defects have developed recently.

(4) Bad weather, accidental tripping, and suspicious equipment operation.

(5) legal holidays, holidays and important tasks notified by superiors.

Equipment maintenance system

1. Strictly implement prevention first, according to a certain period and predetermined plan, and according to the operation status of power generation equipment, achieve high quality and short time.

Time limit for a project, should be required, must be required.

2. Conduct production maintenance once a month, and classify and maintain the operating equipment. For example, oiling, pest control, carbon brush replacement, minor problems.

Processing, etc.

3. Carry out minor equipment repairs every six months. Conduct a comprehensive inspection and protective treatment of power generation equipment. Such as thematic testing, inspection and calibration.

Check, oil change, etc.

4. If the equipment is seriously abnormal in operation, unscheduled temporary maintenance should be carried out. When the defect is serious and the repair cost is high, the equipment should be in

Ask the leader for approval, and handle it according to the equipment minor repair procedure.

5. Equipment overhaul should be determined according to equipment health or maintenance procedures. Comprehensive inspection and maintenance of equipment, defect treatment and improvement,

Give priority to with professionals, supplemented by other personnel, and do someone who's in charge, a clear division of labor.

6. The 5th,15th, and 25th morning of each month 10: 00 are the switching days of power plant standby equipment, and records shall be made after the switching.

Equipment defect management system

1. After the relevant personnel find the equipment defects, whether they are eliminated or not, the personnel on duty should make records and report to the relevant leaders.

2. The personnel on duty with serious defects should promptly organize to eliminate or take other measures to prevent accidents.

3. Defects that need to be handled by other departments should be reported by the personnel on duty or the long-term value in time and urged to be handled as soon as possible.

4. General defects can be included in the plan for processing.

5. The long-term value should always check the elimination of equipment defects, and those that have not been eliminated should be handled as soon as possible.

Spare parts management system

1. Spare parts shall be kept and distributed in a unified way, and the warehouse shall be inspected and approved by special personnel.

2. Spare parts should be stored separately, and flammable and corrosive items should be stored separately.

3. All items should be put on the shelves, neatly marked and kept in a storage account.

4. Keep the warehouse clean and ventilated to prevent the goods from being moth-eaten or moldy.

5. Items should be counted regularly to ensure that the accounts are consistent.

Operational analysis system

1. Operators should analyze and find out the abnormal reasons in time through instrument instructions, operation records, equipment inspection and operation.

2. When a special abnormal phenomenon occurs, the main body should be analyzed, the reasons should be found out and measures should be taken to eliminate it.

3. When the personnel on duty find that there is no clear judgment after analysis, they shall promptly notify the factory department to analyze and solve it.

4. At the end of each year, the factory department organizes relevant personnel to comprehensively analyze all aspects of the factory (safety indicators, equipment indicators and economic indicators).

Equipment rating system

1. According to the intact degree of equipment, it is divided into three categories:

Class I: Equipment that has been tested in operation, is in good technical condition, has no defects, and can ensure safe and economical operation.

Class II: basically intact equipment and individual components, although with general defects, can still operate safely without endangering personal and equipment safety.

Category III: Equipment with major defects, endangering safe operation, reducing output and serious "three leaks".

2. According to the requirements of "Measures for Grading Rural Hydropower Equipment", carefully divide the equipment units.

3. Conduct an annual appraisal activity according to the equipment unit. If you can't reach the first level, you must make an upgrade plan and upgrade within half a year.

4. The intact rate of equipment in the whole plant must reach more than 95%, and the intact rate of first-class equipment must reach more than 80%.

5. Equipment rating summary table must be filled in carefully every year.

Accident statistical investigation system

1. Immediately report the accident to the competent security department and relevant leaders.

2. Write an accident report within ten days after the general accident.

3. Write an accident report within three days after a major accident.

4. Without investigation and record, the scene of the accident shall not be changed at will.

5. Whoever conceals the truth of the accident and obstructs the investigation shall be doubly punished.

Safety education system

1. All new workers who absorb or change jobs must receive safety education before taking up their posts, and can only take up their posts after passing the examination.

2. Workers with special types of work should attend the training courses organized by the competent department and hold relevant certificates after passing the examination.

3. Combined with safety activities, conduct a theoretical assessment of safety technical knowledge once a year, and establish a file of assessment results.

4. The main contents of safety education are:

1). Carry out the guidelines, policies, decrees and regulations of the Party and the state on safe construction.

2). Relevant regulations on safety production management.

3). Electromechanical and all kinds of safety technology operating procedures.

4). Experience, lessons and preventive measures of construction and safety work in dangerous areas.

5). Hazards and protection of dust poisoning.

6, the implementation of team education, on-site education, job education and other three-level safety education system.

Fire prevention system of material warehouse

1. Seriously implement the policy of "putting prevention first and combining prevention with elimination".

2. Smoking is prohibited when warehousing, and inflammable and explosive articles are not allowed to be carried.

3. It is not allowed to pull and connect the power cord randomly in the warehouse, and the management of electricity consumption should be strengthened in accordance with the "Regulations on Electrical Safety Management" to prevent electrical fires.

4. All kinds of articles and inflammable and explosive articles must be strictly stacked separately, and safety measures should be taken.

5. There should be certain lighting facilities inside and outside the warehouse to keep the traffic of fire-fighting vehicles unblocked and strengthen patrol on duty.

6. A certain number of fire-fighting equipment should be equipped inside and outside the warehouse, and special personnel should be appointed for maintenance and management, and updated regularly to ensure completeness and effectiveness.

7. Check the fire prevention work and facilities regularly, once a month 1-2 times, and find fire hazards that must be eliminated immediately, which are difficult to eliminate at the moment.

It is necessary to set people and measures and make rectification within a time limit.

8. In case of fire and fire alarm, immediately report to the public security fire department and organize rescue to protect the scene.

9. Before finding out whether there is danger or knowing that there is danger and taking effective measures, it is not allowed to weld parts connected with other units.

When cutting, strictly implement the safety fire-proof welding and cutting system.

sanitation system

1. Before the operation of each shift, the central control room, tool room, each panel and the whole generator floor should be kept clean, and the switch cabinets, protection panels,

Clean the surface of the governor and other equipment once.

2. The maintenance team should make a general cleaning of the lounge before leaving work every day, and clean the surfaces such as the charging room, turbine floor and equipment once a week.

Sanitary cleaning.

3. The office staff should clean the office once a day.

4. Corrosive and polluting articles are not allowed to be brought into the factory or indoors. Workers should take the factory as their home and take care of flowers, trees and public facilities.

5. Do a good job in indoor and outdoor hygiene. Clean the sanitary common area of each team on May 5-438+00 and 25th every month to keep the indoor facilities clean and bright.

Put them in order, and smoking is prohibited in the central operation room.

Safety reward and punishment system

1. Those who find major hidden dangers of accidents will be rewarded with 50- 100 yuan depending on the circumstances.

2. Reward 30-50 yuan to those who can eliminate hidden dangers of accidents in time and restore normal operation of equipment.

3. Reward those who put forward reasonable suggestions and are adopted. 30-50 yuan.

4. If accidents or failures are caused due to untimely patrol, those responsible will be fined 50- 100 if they are not eliminated in time.

Yuan, those with unclear responsibilities will be fined 50- 100 yuan each, and the monitoring will be doubled.

5. Accidents or other safety accidents caused by responsibilities shall be implemented in accordance with the provisions on safety responsibilities.

Bonus distribution system

1. According to the requirements of management by objectives, the factory leaders lead the employees of the whole factory to fully complete the annual production tasks assigned by the bureau. Director and secretary

Enjoy the ordinary employee award 1.5 times, and the deputy director 1.3 times.

2. The team leader can complete the post target responsibility of the team leader, and the team leader can grasp the work well, and can enjoy 65438+ 0.2 times the reward of ordinary employees.

3 employed technical personnel, only enjoy the comprehensive bonus coefficient, do not enjoy the bonus coefficient of factory overcapacity.

4. Allocate employee funds according to work performance and technical assessment scores.

5. Sick leave shall be implemented according to the regulations of the Bureau.

6. Leave for five days a day, two days and ten days, three days and a half months, and leave for more than three days according to the regulations of the bureau.

7. Because I can't strictly abide by labor discipline at work, I can't be competent for the job, so I have to transfer my team to study, and only during the study period.

Pay wages.

Labor discipline reward and punishment system

In order to arouse the enthusiasm of the broad masses of workers, enhance their sense of ownership, and make the power plant form a unity of production, work and study.

A "unity, tension, seriousness and vividness" as a whole, formulated the following system:

A variety of public welfare activities (study, meetings, voluntary labor, etc.). )

1. Those who do not participate will carry out various public welfare activities and compulsory labor as required by the bureau as appropriate. 5- 10.

Yuan.

2. For the public welfare activities organized in the factory that must be attended, those who do not participate will be fined 5- 10 yuan as appropriate.

3. Those who take the initiative to do good things for the factory will be rewarded as appropriate.

Two. labour discipline

1. Every employee must obey the assignment of the leader. For those who do not obey the distribution and make trouble without reason, the leaders have the right to stop their work and reflect it, and press

If the circumstances are serious, the bonus will be deducted for half a month or the whole month.

2. If something happens, you must ask the monitor for leave, and the monitor is only allowed to ask for leave for one day.

3. If the personal leave is more than three days, a leave note must be written in advance, and the monitor of the class will sign and agree with the factory department for examination and approval. Oral or telephone leave is not allowed.

The factory leaders have verified that it is really too late to ask for leave, and they should also perform it afterwards.

4. Absenteeism shall be punished according to the regulations of the Bureau, and the necessary sick leave medical certificate shall be implemented according to the regulations of the Bureau.

5. For the five major learners of employees, it is stipulated in the study day that the school's certification materials must be produced and implemented in accordance with the rewards and punishments stipulated by the bureau.

Otherwise, it will be punished according to the regulations of the factory department.

6. It is forbidden to be late and leave early. 2 yuan will be deducted every hour for being late and leaving early, and 5 yuan will be deducted every hour for exceeding 1 hour.

7. Working hours. In the middle, it is not allowed to leave the post without authorization to deduct 2 yuan for the accumulated time, and deduct 5 yuan for more than 2 hours, and change meals at eleven o'clock in the day shift.

At one o'clock, the night shift is from five to seven. You are not allowed to sit or lie in the day shift, and your salary will be deducted for one day at a time.

8. Very special circumstances, special treatment.

9. It is forbidden to make trouble by drinking. Those who enter the factory after drinking will be fined 1-3 months, and those who accompany the wine will be fined for half a month or one month.

Monthly bonus.

10. Fighting is forbidden, and 1-3 months bonus will be deducted as appropriate.

1 1. The monitor is serious and responsible, and writes a public diary (the reasons for being late, leaving early, leaving the post halfway and the time for changing meals are clearly recorded), such as

The squad leader who practices favoritism and malpractice will be given two punishments depending on the circumstances.

12. If you don't watch pornographic books, videos or gambling, the discoverer will be deducted three months' bonus.

Third, work attitude.

Conscientious and responsible work, regular inspection, timely handling of equipment defects, timely reporting or handling of equipment defects to reduce losses.

Award 5-50 yuan.

Fourth, health.

1. Every employee must keep the inside and outside of the factory clean and tidy, and clean his own sanitary sharing area on time, which is not good for personal sanitary sharing area.

Responsible. Those who fail the inspection will be fined 1- 10 yuan each time.

2. Each team should clean the turbine floor, generator floor, central control room and lounge on time. If the inspection fails, one point will be deducted from each class.

(1-5 yuan).

Five, one of the following circumstances buckle 50 yuan.

1. Unable to complete all the work assigned by the factory team.

2. Incorrect working attitude and violation of discipline.

3. Absence this month.

4. Don't ask for leave at work, and don't change the education after leaving the post.

5. The team can't change shifts more than three times on time.