How can I tear off the label?

These tools are easy to find:

1, a hair dryer. This is the most important tool and a set of core tools, but it should be noted that we use a heating blower, so we must be able to blow hot air. Ordinary hair dryers may not work properly, and the old ones are better.

2. Insert one. A common art knife will do. Be careful not to use it. Blades may need to be used in special occasions.

3. Be careful. The work you do is actually very simple, but the most important thing is that you must be careful before you succeed.

twice

This experimental method is suitable for the following situations:

1, smooth the things on the stickers that you often wear, and stick the self-adhesive paper on the box on the box.

3. Computer accessories or mobile phones,

Paper labels,

2. As shown in Figure 4, it was found that the adhesive composition would pass through some characters on the left side of various anti-counterfeiting labels.

As shown in fig. 5, it is attached to a plastic film tape or label.

Three specific methods

1, the first case is the easiest to handle, scrape one with a blade, and then slowly tear it by hand. If the speed is too slow, provide a micro-heat blower.

2. In this case, it is difficult to handle, especially when the pattern is printed on the seed tape. The computer desk belt is heated, so you can turn it on to a weak wind at the beginning and scrape it with a blade, focusing on the heating belt at the back. Be careful not to overheat, or the tape will be deformed. You must be careful in the whole process of slowly tearing your hand. There are more or less pattern marks on the tape, so be careful not to overheat, otherwise more patterns will be left. Tips: Mortgage is faster, there is less residue, and it is easier to tear the carton. This may be related to many aspects, but as long as the technology is skilled, it can still be satisfactory in most cases, so the specific impact of resealing is not easy to find without careful reading.

3. In this case, you can scrape the blade directly. Slowly, a thinner blade may be needed. In some cases, blades can be used. If the label is large, a blower can help heat it.

4, this label is generally small, you can use the thin corner of the blade, heat the hair dryer, and slowly stir the entire label. The handling of this label must be careful and careless before handling, which will leave traces and become invalid once.

5. It is useful to deal with this trick. General heating is definitely not possible, because plastic films are also blown out of shape. This method is very simple: tear it directly by hand, not slowly, but quickly, because the big label can be divided into several times and suddenly torn quickly by hand. In order to cope with this situation, the ambient temperature should be as low as possible.